Author : Tran Quoc Khanh
Publisher : Herbert Utz Verlag
Page : 774 pages
File Size : 49,9 MB
Release : 2015-10-08
Category :
ISBN : 3831644829
It is a pleasure to present the proceedings of the 11th International Symposium on Automotive Lighting, which took place in Darmstadt on September 28–30, 2015. This conference is the document of a series of successful cobnferences since the first PAL-coference in 1995 and shows the latest innovative potentials of the automotive industry in the application of lighting technologies.
Author : Tran Quoc Khanh
Publisher : Herbert Utz Verlag
Page : 800 pages
File Size : 15,13 MB
Release : 2017-09-22
Category :
ISBN : 3831646716
It is a pleasure to present you the proceedings of the 12th International Symposium on Automotive Lighting, which takes place in Darmstadt on September 25-27, 2017. This conference is the document of a series of successful conferences since the first PAL-conference in 1995 and shows the latest innovative potentials of the automotive industry in the application of lighting technologies.
Author : Tran Quoc Khanh
Publisher : utzverlag GmbH
Page : 760 pages
File Size : 14,56 MB
Release : 2019-09-19
Category : Technology & Engineering
ISBN : 3831648174
Author : T. Q. Khan
Publisher : John Wiley & Sons
Page : 517 pages
File Size : 50,77 MB
Release : 2014-11-24
Category : Science
ISBN : 3527670165
Promoting the design, application and evaluation of visually and electrically effective LED light sources and luminaires for general indoor lighting as well as outdoor and vehicle lighting, this book combines the knowledge of LED lighting technology with human perceptual aspects for lighting scientists and engineers. After an introduction to the human visual system and current radiometry, photometry and color science, the basics of LED chip and phosphor technology are described followed by specific issues of LED radiometry and the optical, thermal and electric modeling of LEDs. This is supplemented by the relevant practical issues of pulsed LEDs, remote phosphor LEDs and the aging of LED light sources. Relevant human visual aspects closely related to LED technology are described in detail for the photopic and the mesopic range of vision, including color rendering, binning, whiteness, Circadian issues, as well as flicker perception, brightness, visual performance, conspicuity and disability glare. The topic of LED luminaires is discussed in a separate chapter, including retrofit LED lamps, LED-based road and street luminaires and LED luminaires for museum and school lighting. Specific sections are devoted to the modularity of LED luminaires, their aging and the planning and evaluation methods of new LED installations. The whole is rounded off by a summary and a look towards future developments.
Author : Jan Fischer-Wolfarth
Publisher : Springer Science & Business Media
Page : 397 pages
File Size : 18,99 MB
Release : 2013-06-04
Category : Technology & Engineering
ISBN : 331900476X
The road vehicle of the future will embrace innovations from three major automotive technology fields: driver assistance systems, vehicle networking and alternative propulsion. Smart systems such as adaptive ICT components and MEMS devices, novel network architectures, integrated sensor systems, intelligent interfaces and functional materials form the basis of these features and permit their successful and synergetic integration. They increasingly appear to be the key enabling technologies for safe and green road mobility. For more than fifteen years the International Forum on Advanced Microsystems for Automotive Applications (AMAA) has been successful in detecting novel trends and in discussing the technological implications from early on. The topic of the AMAA 2013 will be “Smart Systems for Safe and Green Vehicles”. This book contains peer-reviewed papers written by leading engineers and researchers which all address the ongoing research and novel developments in the field. www.amaa.de
Author : Fan Rui
Publisher : Trans Tech Publications Ltd
Page : 747 pages
File Size : 25,32 MB
Release : 2009-02-20
Category : Science
ISBN : 3038132691
With Some Topics in Advanced Manufacturing Technology Selected, peer reviewed papers from the 9th International Conference on Progress of Machining Technology, April 25-28, 2009, Kunming, China, ICPMT’09
Author : Tallay Ornan
Publisher : Saint-Paul
Page : 318 pages
File Size : 26,88 MB
Release : 2005
Category : History
ISBN : 9783525530078
This book analyzes the history of Mesopotamian imagery form the mid-second to mid-first millennium BCE. It demonstrates that in spite of rich textual evidence, which grants the Mesopotamian gods and goddesses an anthropmorphic form, there was a clear abstention in various media from visualizing the gods in such a form. True, divine human-shaped cultic images existed in Mesopotamian temples. But as a rule, non-anthropomorphic visual agents such as inanimate objects, animals or fantastic hybrids replaced these figures when they were portrayed outside of their sacred enclosures. This tendency reached its peak in first-millennium Babylonia and Assyria. The removal of the Mesopotamian human-shaped deity from pictorial renderings resembles the Biblical agenda not only in its avoidance of displaying a divine image but also in the implied dual perception of the divine: according to the Bible and the Assyro-Babylonian concept the divine was conceived as having a human form; yet in both cases anthropomorphism was also concealed or rejected, though to a different degree. In the present book, this dual approach toward the divine image is considered as a reflection of two associated rather than contradictory religious worldviews. The plausible consolidation of the relevant Biblical accounts just before the Babylonian Exile, or more probably within the Exile - in both cases during a period of strong Assyrian and Babylonian hegemony - points to a direct correspondence between comparable religious phenomena. It is suggested that far from their homeland and in the absence of a temple for their god, the Judahite deportees adopted and intensified the Mesopotamian avoidance of anthropomorphic picorial portrayals of deities. While the Babylonian representations remained confined to temples, the exiles would have turned a cultic reality - i.e., the nonwritten Babylonian custom - into a written, articulated law that explicity forbade the pictorial representation of God.
Author : Mohammad Jawaid
Publisher : Springer Nature
Page : 486 pages
File Size : 22,12 MB
Release : 2021-08-18
Category : Technology & Engineering
ISBN : 9811618542
This book explores vegetable fiber composite as an eco-friendly, biodegradable, and sustainable material that has many potential industrial applications. The use of vegetable fiber composite supports the sustainable development goals (SDGs) to utilize more sustainable and greener composite materials, which are also easy to handle and locally easily available with economical production costs. This book presents various types of vegetable fiber composite and its processing methods and treatments to obtain desirable properties for certain applications. The book caters to researchers and students who are working in the field of bio-composites and green materials.
Author : Natrah Abdullah
Publisher : Springer
Page : 376 pages
File Size : 39,90 MB
Release : 2018-08-21
Category : Computers
ISBN : 9811316287
This book constitutes the refereed proceedings of the 5th International Conference on User Science and Engineering, i-USEr 2018, held in Puchong, Malaysia, in August 2018. The 32 papers accepted for i-USEr 2018 were selected from 72 submissions with a thorough double-blind review process. The selected papers illustrate how HCI is inclusive and omnipresent within the domains of informatics, Internet of Things, Quality of Life, and others. They are organized in the following topical sections: design, UX and usability; HCI and underserved; technology and adoption; human centered computing; HCI and IT infrastructure; and HCI and analytics.
Author : A Chrysanthou
Publisher : Woodhead Publishing
Page : 231 pages
File Size : 14,69 MB
Release : 2014-02-14
Category : Technology & Engineering
ISBN : 0857098845
Due to its speed, low energy requirements, and the fact that it does not require a pre-drilled hole, the technique of self-piercing riveting (SPR) has been increasingly adopted by many industries as a high-speed mechanical fastening technique for the joining of sheet material components. Self-piercing riveting comprehensively reviews the process, equipment, and corrosion behaviour of self-piercing riveting, and also describes the process of evaluation and modelling of strength of self-piercing riveted joints, quality control methods and non-destructive testing.Part one provides an extensive overview of the properties of self-piercing riveting. Chapters in this section review the mechanical strength, fatigue, and corrosion behaviour of self-piercing riveted joints. The second part of the book outlines the processing and applications of SPRs, and describes the dynamic strength evaluation/crashworthiness of SPRs, and the modelling of strength of self-piercing riveted joints, before going on to discuss the assessment of the suitability of materials for self-piercing riveting. The concluding chapters describe the quality control and non-destructive testing of self-piercing riveted joints, optimization of the strength of self-piercing rivets, and provides an overview of self-piercing rivets in the automotive industry and the applications of self-piercing riveting in automated vehicle construction.Self-piercing riveting is a standard reference for engineers and designers in the aerospace, materials, welding, joining, automotive and white goods industries, as well as manufacturers of metal components for the automotive, aerospace, white goods and building industries. - Comprehensively reviews the process, equipment, and corrosion behaviour of self-piercing riveting - Describes the process of evaluation and modelling of strength of self-piercing riveted joints, quality control methods and non-destructive testing - Provides an overview of quality, optimization, applications and strength evaluations of self-piercing riveting
