Airborne/Space-Based Doppler Lidar Wind Sounders Sampling the Pbl and Other Regions of Significant Beta and U Inhomogeneities


Book Description

This final report covers the period from April 1994 through March 1998. The proposed research was organized under four main tasks. Those tasks were: (1) Investigate the vertical and horizontal velocity structures within and adjacent to thin and subvisual cirrus; (2) Investigate the lowest 1 km of the PBL and develop algorithms for processing pulsed Doppler lidar data obtained from single shots into regions of significant inhomogeneities in Beta and U; (3) Participate in OSSEs including those designed to establish shot density requirements for meso-gamma scale phenomena with quasi-persistent locations (e.g., jets, leewaves, tropical storms); and (4) Participate in the planning and execution of an airborne mission to measure winds with a pulsed CO2 Doppler lidar. Over the four year period of this research contract, work on all four tasks has yielded significant results which have led to 38 professional presentations (conferences and publications) and have been folded into the science justification for an approved NASA space mission, SPARCLE (SPAce Readiness Coherent Lidar Experiment), in 2001. Also this research has, through Task 4, led to a funded proposal to work directly on a NASA field campaign, CAMEX III, in which an airborne Doppler wind lidar will be used to investigate the cloud-free circulations near tropical storms. Monthly progress reports required under this contract are on file. This final report will highlight major accomplishments, including some that were not foreseen in the original proposal. The presentation of this final report includes this written document as well as material that is better presented via the internet (web pages). There is heavy reference to appended papers and documents. Thus, the main body of the report will serve to summarize the key efforts and findings. Emmitt, Dave Marshall Space Flight Center WIND VELOCITY MEASUREMENT; DOPPLER RADAR; OPTICAL RADAR; REMOTE SENSING; PLANETARY BOUNDARY LAYER; METEOROLOGICAL RADAR; ATMOSPHERIC S...




Analysis of the Uncertainty in Wind Measurements from the Atmospheric Radiation Measurement Doppler Lidar During XPIA


Book Description

In March and April of 2015, the ARM Doppler lidar that was formerly operated at the Tropical Western Pacific site in Darwin, Australia (S/N 0710-08) was deployed to the Boulder Atmospheric Observatory (BAO) for the eXperimental Planetary boundary-layer Instrument Assessment (XPIA) field campaign. The goal of the XPIA field campaign was to investigate methods of using multiple Doppler lidars to obtain high-resolution three-dimensional measurements of winds and turbulence in the atmospheric boundary layer, and to characterize the uncertainties in these measurements. The ARM Doppler lidar was one of many Doppler lidar systems that participated in this study. During XPIA the 300-m tower at the BAO site was instrumented with well-calibrated sonic anemometers at six levels. These sonic anemometers provided highly accurate reference measurements against which the lidars could be compared. Thus, the deployment of the ARM Doppler lidar during XPIA offered a rare opportunity for the ARM program to characterize the uncertainties in their lidar wind measurements. Results of the lidar-tower comparison indicate that the lidar wind speed measurements are essentially unbiased (~1cm s-1), with a random error of approximately 50 cm s-1. Two methods of uncertainty estimation were tested. The first method was found to produce uncertainties that were too low. The second method produced estimates that were more accurate and better indicators of data quality. As of December 2015, the first method is being used by the ARM Doppler lidar wind value-added product (VAP). One outcome of this work will be to update this VAP to use the second method for uncertainty estimation.







Optimizing Dual-Doppler Lidar Measurements of Surface Layer Coherent Structures with Large-Eddy Simulations


Book Description

Coherent structures are patterns in the wind field of the atmospheric boundary layer. The deployment of two scanning Doppler lidars facilitates the measurement of the horizontal wind field, but the inherent averaging processes complicate an interpretation of the results. To assess the suitability of this technique for coherent structure detection large-eddy simulations are used as a basis for virtual measurements, and the effects of the lidar technique on the wind field structure are analyzed.




Coherent Doppler Wind Lidars in a Turbulent Atmosphere


Book Description

Radiophysical tools for measuring atmospheric dynamics include sodars, Doppler radars, and Doppler lidars. Among these, coherent Doppler lidars (CDLs) have been considered the best for remote measurement of wind turbulence. This is important not only for understanding the exchange processes in the boundary layer, but also in the applied aspect, such as aviation safety. CDLs significantly extend possibilities of experimental investigation of not only wind turbulence, but also coherent structures such as aircraft wake vortices. The authors of this book conducted field tests of the developed methods of lidar measurements of the wind velocity, atmospheric turbulence parameters, and aircraft wake vortices. This valuable resource, containing over 500 equations based on original results from the authors’ work, gives professionals a comprehensive description of the operating principles of continuous wave and pulsed coherent Doppler lidars. This book studies the possibilities of obtaining information about wind turbulence from data measured by continuous wave and pulsed CDLs. The procedures for estimation are described, as well as algorithms for numerical simulation. Results on the vortex behavior and evolution are then presented.




Airborne/Space-Based Doppler Lidar Wind Sounders Sampling the Pbl and Other Regions of Significant Beta and U Inhomogeneities


Book Description

This final report covers the period from April 1994 through March 1998. The proposed research was organized under four main tasks. Those tasks were: (1) Investigate the vertical and horizontal velocity structures within and adjacent to thin and subvisual cirrus; (2) Investigate the lowest 1 km of the PBL and develop algorithms for processing pulsed Doppler lidar data obtained from single shots into regions of significant inhomogeneities in Beta and U; (3) Participate in OSSEs including those designed to establish shot density requirements for meso-gamma scale phenomena with quasi-persistent locations (e.g., jets, leewaves, tropical storms); and (4) Participate in the planning and execution of an airborne mission to measure winds with a pulsed CO2 Doppler lidar. Over the four year period of this research contract, work on all four tasks has yielded significant results which have led to 38 professional presentations (conferences and publications) and have been folded into the science justification for an approved NASA space mission, SPARCLE (SPAce Readiness Coherent Lidar Experiment), in 2001. Also this research has, through Task 4, led to a funded proposal to work directly on a NASA field campaign, CAMEX III, in which an airborne Doppler wind lidar will be used to investigate the cloud-free circulations near tropical storms. Monthly progress reports required under this contract are on file. This final report will highlight major accomplishments, including some that were not foreseen in the original proposal. The presentation of this final report includes this written document as well as material that is better presented via the internet (web pages). There is heavy reference to appended papers and documents. Thus, the main body of the report will serve to summarize the key efforts and findings.