United States Code


Book Description

"The United States Code is the official codification of the general and permanent laws of the United States of America. The Code was first published in 1926, and a new edition of the code has been published every six years since 1934. The 2012 edition of the Code incorporates laws enacted through the One Hundred Twelfth Congress, Second Session, the last of which was signed by the President on January 15, 2013. It does not include laws of the One Hundred Thirteenth Congress, First Session, enacted between January 2, 2013, the date it convened, and January 15, 2013. By statutory authority this edition may be cited "U.S.C. 2012 ed." As adopted in 1926, the Code established prima facie the general and permanent laws of the United States. The underlying statutes reprinted in the Code remained in effect and controlled over the Code in case of any discrepancy. In 1947, Congress began enacting individual titles of the Code into positive law. When a title is enacted into positive law, the underlying statutes are repealed and the title then becomes legal evidence of the law. Currently, 26 of the 51 titles in the Code have been so enacted. These are identified in the table of titles near the beginning of each volume. The Law Revision Counsel of the House of Representatives continues to prepare legislation pursuant to 2 U.S.C. 285b to enact the remainder of the Code, on a title-by-title basis, into positive law. The 2012 edition of the Code was prepared and published under the supervision of Ralph V. Seep, Law Revision Counsel. Grateful acknowledgment is made of the contributions by all who helped in this work, particularly the staffs of the Office of the Law Revision Counsel and the Government Printing Office"--Preface.




Air Quality Management in the United States


Book Description

Managing the nation's air quality is a complex undertaking, involving tens of thousands of people in regulating thousands of pollution sources. The authors identify what has worked and what has not, and they offer wide-ranging recommendations for setting future priorities, making difficult choices, and increasing innovation. This new book explores how to better integrate scientific advances and new technologies into the air quality management system. The volume reviews the three-decade history of governmental efforts toward cleaner air, discussing how air quality standards are set and results measured, the design and implementation of control strategies, regulatory processes and procedures, special issues with mobile pollution sources, and more. The book looks at efforts to spur social and behavioral changes that affect air quality, the effectiveness of market-based instruments for air quality regulation, and many other aspects of the issue. Rich in technical detail, this book will be of interest to all those engaged in air quality management: scientists, engineers, industrial managers, law makers, regulators, health officials, clean-air advocates, and concerned citizens.




The Clean Air Act Amendments of 1990


Book Description

A primer for small business on the requirements of the Clean Air Act Amendments, which contain new provisions. Explains as simply as possible the complex requirements of the Amendments; describes the law's provisions for businesses in cities with smog problems and the kinds of small businesses that may be affected by these provisions; and provides hotline numbers and the addresses and phone numbers of state agencies that can provide additional information.




Lessons from the Clean Air Act


Book Description

Examines the successes and failures of the Clean Air Act in order to lay a foundation for future energy policy.




Air Emissions from Animal Feeding Operations


Book Description

Air Emissions from Animal Feeding Operations: Current Knowledge, Future Needs discusses the need for the U.S. Environmental Protection Agency to implement a new method for estimating the amount of ammonia, nitrous oxide, methane, and other pollutants emitted from livestock and poultry farms, and for determining how these emissions are dispersed in the atmosphere. The committee calls for the EPA and the U.S. Department of Agriculture to establish a joint council to coordinate and oversee short - and long-term research to estimate emissions from animal feeding operations accurately and to develop mitigation strategies. Their recommendation was for the joint council to focus its efforts first on those pollutants that pose the greatest risk to the environment and public health.




Clean Air Act Amendments of 1989


Book Description




Links Between Air Quality and Economic Growth


Book Description

This report assesses what evidence exists for the ways in which local air quality could influence local economic growth and how those effects might be relevant to the Pittsburgh region.







Fundamentals of Air Pollution


Book Description

Fundamentals of Air Pollution is an important and widely used textbook in the environmental science and engineering community. Written shortly after the passage of the seminal Clean Air Act Amendments of 1990, the third edition was quite timely. Surprisingly, the text has remained relevant for university professors, engineers, scientists, policy makers and students up to recent years. However, in light of the transition in the last five years from predominantly technology-based standards (maximum achievable control technologies or MACTs) to risk-based regulations and air quality standards, the text must be updated significantly. The fourth edition will be updated to include numerous MACTs which were not foreseen during the writing of the third edition, such as secondary lead (Pb) smelting, petroleum refining, aerospace manufacturing, marine vessel loading, ship building, printing and publishing, elastomer production, offsite waste operations, and polyethylene terephthalate polymer and styrene-based thermoplastic polymers production. * Focuses on the process of risk assessment, management and communication, the key to the study of air pollution. * Provides the latest information on the technological breakthroughs in environmental engineering since last edition * Updated information on computational and diagnostic and operational tools that have emerged in recent years.




Transportation Conformity


Book Description

Transportation conformity is required under the Clean Air Act (CAA) Section 176(c) to ensure that Federally-supported transportation activities are consistent with (“conform to”) the purpose of a State Implementation Plan (SIP). Transportation conformity establishes the framework for improving air quality to protect public health and the environment. Conformity to the purpose of the SIP means Federal Highway Administration (FHWA) and Federal Transit Administration (FTA) funding and approvals are given to highway and transit activities that will not cause new air quality violations, worsen existing air quality violations, or delay timely attainment of the relevant air quality standard, or any interim milestone. This Guide was prepared to help State and local officials understand transportation conformity and how conformity requirements relate to transportation investments in their communities. Specifically, the implications of conformity on metropolitan transportation plans, transportation improvement programs (TIPs), and transportation projects are discussed. The Guide provides overview information on the major elements of the conformity process and provides answers to basic questions. Several exhibits are included in the Guide to illustrate key elements of the conformity process. Appendices are also included that discuss the health effects of pollutants, options to reduce on-road mobile source emissions, and resource agency contacts.