Code of Practice for the Selection and Installation of Post-Installed Anchors in Concrete and Masonry


Book Description

Buildings, Concretes, Stone, Brickwork, Blockwork, Anchorages, Structural members, Tensile loading, Bonding, Installation, Test equipment, Tensile testing, Wall anchors, Pull-out tests, Axial-force-resistant members, Test specimens, Testing conditions







A State-of-the-Art Guide for Post-Installed Reinforcement


Book Description

A State-of-the-Art Guide for Post-Installed Reinforcement provides comprehensive coverage on installation, design, and assessment guidelines for post-installed reinforcements, a unique technology used very commonly in the construction industry. Previously published in Hong Kong, this Malaysian edition includes new EOTA technical reports and European Assessment Documents, fundamentals for post-installed reinforcements, design proposals, as well as unique design examples, all of which is specifically tailored for the Malaysian context.







Structures and Architecture - Bridging the Gap and Crossing Borders


Book Description

Structures and Architecture – Bridging the Gap and Crossing Borders contains the lectures and papers presented at the Fourth International Conference on Structures and Architecture (ICSA2019) that was held in Lisbon, Portugal, in July 2019. It also contains a multimedia device with the full texts of the lectures presented at the conference, including the 5 keynote lectures, and almost 150 selected contributions. The contributions on creative and scientific aspects in the conception and construction of structures, on advanced technologies and on complex architectural and structural applications represent a fine blend of scientific, technical and practical novelties in both fields. ICSA2019 covered all major aspects of structures and architecture, including: building envelopes/façades; comprehension of complex forms; computer and experimental methods; futuristic structures; concrete and masonry structures; educating architects and structural engineers; emerging technologies; glass structures; innovative architectural and structural design; lightweight and membrane structures; special structures; steel and composite structures; structural design challenges; tall buildings; the borderline between architecture and structural engineering; the history of the relationship between architects and structural engineers; the tectonic of architectural solutions; the use of new materials; timber structures, among others. This set of book and multimedia device is intended for a global readership of researchers and practitioners, including architects, structural and construction engineers, builders and building consultants, constructors, material suppliers and product manufacturers, and other professionals involved in the design and realization of architectural, structural and infrastructural projects.







NexGen Technologies for Mining and Fuel Industries (Volume I and II)


Book Description

The papers in these two volumes were presented at the International Conference on “NexGen Technologies for Mining and Fuel Industries” [NxGnMiFu-2017] in New Delhi from February 15-17, 2017, organized by CSIR-Central Institute of Mining and Fuel Research, Dhanbad, India. The proceedings include the contributions from authors across the globe on the latest research on mining and fuel technologies. The major issues focused on are: Innovative Mining Technology, Rock Mechanics and Stability Analysis, Advances in Explosives and Blasting, Mine Safety and Risk Management, Computer Simulation and Mine Automation, Natural Resource Management for Sustainable Development, Environmental Impacts and Remediation, Paste Fill Technology and Waste Utilisation, Fly Ash Management, Clean Coal Initiatives, Mineral Processing and Coal Beneficiation, Quality Coal for Power Generation and Conventional and Non-conventional Fuels and Gases. This collection of contemporary articles contains unique knowledge, case studies, ideas and insights, a must-have for researchers and engineers working in the areas of mining technologies and fuel sciences.




Innovation, Communication and Engineering


Book Description

This volume represents the proceedings of the 2013 International Conference on Innovation, Communication and Engineering (ICICE 2013). This conference was organized by the China University of Petroleum (Huadong/East China) and the Taiwanese Institute of Knowledge Innovation, and was held in Qingdao, Shandong, P.R. China, October 26 - November 1, 2013. The conference received 653 submitted papers from 10 countries, of which 214 papers were selected by the committees to be presented at ICICE 2013. The conference provided a unified communication platform for researchers in a wide range of fields from information technology, communication science, and applied mathematics, to computer science, advanced material science, design and engineering. This volume enables interdisciplinary collaboration between science and engineering technologists in academia and industry as well as networking internationally. Consists of a book of abstracts (260 pp.) and a USB flash card with full papers (912 pp.).




Design of anchorages in concrete


Book Description

Despite the widespread use of cast-in-place and post-installed anchors in construction, the overall level of understanding in the engineering community regarding their behaviour remains quite limited. Furthermore, since the publication of the original CEB design guide, “Design of Fastenings in Concrete”, ongoing research and additional application experience has led to an improved understanding and deepened knowledge in various areas of fastening technology. fib Bulletin 58 therefore represents a substantial revision of the original 1997 guide. It addresses a variety of loading types and failure modes and takes into account the current state of the art for anchorages in new construction as well as for their use in the repair and strengthening of existing concrete structures. fib Bulletin 58 provides a method for the design of the anchorage and additional rules for the design of the concrete member to which the load is transferred. The specified provisions are based on the currently available research.




Anchorage in Concrete Construction


Book Description

Das Buch stellt den aktuellen Stand der kompletten Befestigungstechnik für Beton und Mauerwerk mit Einlegeteilen (Ankerschienen, Kopfbolzen), Dübeln (Metallspreizdübel, Hinterschnittdübel, Verbunddübel, Betonschrauben, Kunststoffdübel) und Setzbolzen umfassend dar. Die Befestigungselemente und ihre Wirkungsmechanismen werden ausführlich beschrieben und das Tragverhalten im ungerissenen und gerissenen Beton untersucht. Weiterhin werden das Korrosionsverhalten, das Verhalten bei Brandbeanspruchung sowie bei Erdbeben- und Schockbeanspruchung behandelt. Von besonderer internationaler Aktualität ist die Bemessung gemäß der europäischen und amerikanischen Normung. Praxisorientierte Kriterien zur Auswahl von Befestigungsmitteln und Bemessungsbeispiele runden das Werk zu einem einzigartigen Handbuch ab.