Effectiveness of Changeable Message Signs in Controlling Vehicle Speeds in Work Zones


Book Description

Work zone speeds have customarily been regulated by standard regulatory or advisory speed signs. However, most drivers do not slow down in response to these static speed control measures. The changeable message sign (CMS) with radar unit has dynamic capabilities which may be more effective in altering driver behavior. The radar, attached directly to the CMS, determines the actual speed of individual vehicles in the traffic stream. Upon detecting a speed higher than a preset threshold limit, the CMS can display a personalized warning message. This study evaluated the effectiveness of the CMS with radar unit in reducing work zone speeds. Four CMS messages designed to warn drivers that their speed exceeded the maximum safe speed were tested at seven work zones on two interstate highways in Virginia. Speed and volume data for the whole population traveling through the work zone were collected with automatic traffic counters. To assess the effect of CMS on high-speed drivers in particular, vehicles that triggered the radar-activated display were videotaped as they passed through the work zone. Using the data obtained from the traffic counters and videotapes, speed characteristics were determined at the beginning, middle, and end of the work zone. These characteristics were computed for the whole population and for high-speed vehicles separately. Statistical tests were then conducted using these speed characteristics to determine whether significant reductions in speed accompanied the use of CMS. Odds ratios were first calculated to compare the odds for speeding when using CMS with the odds for speeding when using the Manual on Uniform Traffic Control Devices (MUTCD) signing only. These odds ratios indicated that CMS effectively reduced the number of vehicles speeding by any amount, by 5 mph or more, and by 10 mph or more in the work zone. When analysis of variance was used to compare speeds when using the CMS with speeds when using MUTCD signing only, all of the speed characteristics average speeds, 85th percentile speeds, speed variance, and the percentage of vehicles speeding by any amount, by 5 mph or more, and by 10 mph or more were reduced with any of the four CMS messages. In some cases, these reductions were not significant at a= 0.05. The messages were rated according to their level of effectiveness in the following order: [1] YOU ARE SPEEDING SLOW DOWN, [2] HIGH SPEED SLOW DOWN, [3] REDUCE SPEED IN WORK ZONE, and [4] EXCESSIVE SPEED SLOW DOWN. Finally, t tests were conducted using the speed data obtained for the high-speed vehicles, and at a significance level of ct 0.05, all of the messages were effective in significantly reducing the average speeds of those vehicles traveling 59 mph or faster in a 55 mph work zone when compared to MUTCD signing only.




Effectiveness of Changeable Message Signs in Controlling Vehicle Speeds in Work Zones


Book Description

Work zone speeds have customarily been regulated by standard regulatory or advisory speed signs. However, most drivers do not slow down in response to these static speed control measures. The changeable message sign (CMS) with radar unit has dynamic capabilities which may be more effective in altering driver behavior. The radar, attached directly to the CMS, determines the actual speed of individual vehicles in the traffic stream. Upon detecting a speed higher than a preset threshold limit, the CMS can display a personalized warning message. This study evaluated the effectiveness of the CMS with radar unit in reducing work zone speeds. Four CMS messages designed to warn drivers that their speed exceeded the maximum safe speed were tested at seven work zones on two interstate highways in Virginia. Speed and volume data for the whole population traveling through the work zone were collected with automatic traffic counters. To assess the effect of CMS on high-speed drivers in particular, vehicles that triggered the radar-activated display were videotaped as they passed through the work zone. Using the data obtained from the traffic counters and videotapes, speed characteristics were determined at the beginning, middle, and end of the work zone. These characteristics were computed for the whole population and for high-speed vehicles separately. Statistical tests were then conducted using these speed characteristics to determine whether significant reductions in speed accompanied the use of CMS. Odds ratios were first calculated to compare the odds for speeding when using CMS with the odds for speeding when using the Manual on Uniform Traffic Control Devices (MUTCD) signing only. These odds ratios indicated that CMS effectively reduced the number of vehicles speeding by any amount, by 5 mph or more, and by 10 mph or more in the work zone. When analysis of variance was used to compare speeds when using the CMS with speeds when using MUTCD signing only, all of the speed characteristics average speeds, 85th percentile speeds, speed variance, and the percentage of vehicles speeding by any amount, by 5 mph or more, and by 10 mph or more were reduced with any of the four CMS messages. In some cases, these reductions were not significant at a= 0.05. The messages were rated according to their level of effectiveness in the following order: [1] YOU ARE SPEEDING SLOW DOWN, [2] HIGH SPEED SLOW DOWN, [3] REDUCE SPEED IN WORK ZONE, and [4] EXCESSIVE SPEED SLOW DOWN. Finally, t tests were conducted using the speed data obtained for the high-speed vehicles, and at a significance level of ct 0.05, all of the messages were effective in significantly reducing the average speeds of those vehicles traveling 59 mph or faster in a 55 mph work zone when compared to MUTCD signing only.




Changeable Message Signs


Book Description

"This synthesis will be of interest to traffic engineers in federal, state, provincial, and local transportation agencies who are responsible for the design and operation of safe and efficiency highway systems. It will also be useful to consulting traffic engineers, sign manufacturers, and vendors in the private sector who assist governmental clients in the application of changeable message sign (CMS) and other intelligent transportation systems (ITS) technology. It is an update of NCHRP Synthesis no. 61 (1979)."--Avant-propos.




Use of Speed Monitoring and Communications Display for Traffic Control


Book Description

A research report to identify or develop a speed monitoring display suitable for use in interstate highway work zones, & evaluate the display's effectiveness in reducing speeds in interstate work zones. A review of the literature & current practice was conducted to identify product availability & other state transportation use. Speed monitoring display alternatives were identified & evaluated according to essential requirements & project evaluation criteria. A lidar laser radar device was tested with a changeable message sign. The speed monitoring display was effective in reducing speeds higher than 70 mph.




Human Factors Guidelines for Road Systems


Book Description

NCHRP report 600 explores human factors principles and findings for consideration by highway designers and traffic engineers. The report is designed to help the nonexpert in human factors to consider more effectively the roadway user's capabilities and limitations in the design and operation of highway facilities.







Work Zone Operations


Book Description










Managing Safety: Challenges Ahead (2 Vols. Set)


Book Description

Papers presented at the Safety Conference: Managing Safety : Challenges Ahead, held at New Delhi during 14-16 February 2005.