Polymer Concrete Overlays for Bridge Decks
Author : Timothy L. Ramirez
Publisher :
Page : 134 pages
File Size : 26,13 MB
Release : 1995
Category : Concrete bridges
ISBN :
Author : Timothy L. Ramirez
Publisher :
Page : 134 pages
File Size : 26,13 MB
Release : 1995
Category : Concrete bridges
ISBN :
Author :
Publisher :
Page : 294 pages
File Size : 17,19 MB
Release : 1998
Category : Bridges
ISBN :
Author : David W. Fowler
Publisher : Transportation Research Board
Page : 75 pages
File Size : 41,88 MB
Release : 2011
Category : Technology & Engineering
ISBN : 0309143543
TRB's National Cooperative Highway Research Program (NCHRP) Synthesis 423: Long-Term Performance of Polymer Concrete for Bridge Decks addresses a number of topics related to thin polymer overlays (TPOs). Those topics include previous research, specifications, and procedures on TPOs; performance of TPOs based on field applications; the primary factors that influence TPO performance; current construction guidelines for TPOs related to surface preparation, mixing and placement, consolidation, finishing, and curing; repair procedures; factors that influence the performance of overlays, including life-cycle cost, benefits and costs, bridge deck condition, service life extension, and performance; and successes and failures of TPOs, including reasons for both.
Author : Wade H. Shafer
Publisher : Springer Science & Business Media
Page : 430 pages
File Size : 25,29 MB
Release : 2012-12-06
Category : Science
ISBN : 1461573947
Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Oata Analysis and Synthesis (CINOAS) * at Purdue. University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all con cerned if the printing and distribution of the volumes were handled by an interna tional publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Cor poration of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 33 (thesis year 1988) a total of 13,273 theses titles from 23 Canadian and 1 85 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this important annual reference work. While Volume 33 reports theses submitted in 1988, on occasion, certain univer sities do report theses submitted in previous years but not reported at the time.
Author : H. G. Russell
Publisher : Transportation Research Board
Page : 188 pages
File Size : 32,38 MB
Release : 2004
Category : Bridges
ISBN : 0309070112
At head of title: National Cooperative Highway Research Program.
Author : Michael M. Sprinkel
Publisher :
Page : 62 pages
File Size : 20,43 MB
Release : 1990
Category : Bridges
ISBN :
The results of a study undertaken to evaluate premixed polymer concrete overlays (PMPCO) over a 3-year period are presented. The PMPCO evaluated were constructed with polyester amide para resin and silica sand 1;. polyester styrene resin 1 and silica sand 2; polyester styrene resin 2, basalt aggregate and coke breeze (for conductivity); polyester styrene resin 2, silica sand 3 and coke breeze; and vinyl ester styrene resin, silica sand 2, and coke breeze. The mixing of the ingredients was done with either portable concrete mixers, mortar mixers, or a continuous batching mobile concrete mixer. The overlays were struck off and consolidated with a vibrating screed or a slip form paver. The report indicates that a nonconductive PMPCO with high bond strength, low permeability, and high skid resistance can be successfully installed by a contractor and opened to traffic after only three hours of curing. The report indicates that a conductive PMPCO with high bond strength and skid resistance can be successfully installed as a secondary anode for a cathodic protection system. Also, it is shown that the special provision for a PMPCO should require the installation of test patches or test sections of overlay prior to placing the final overlay to assure that the surface preparation is adequate and the mixing, installation equipment, procedures, and materials will provide a satisfactory overlay.
Author : Sharon M. DeHayes
Publisher : ASTM International
Page : 154 pages
File Size : 17,14 MB
Release : 1994
Category : Cement
ISBN : 0803118783
Author :
Publisher :
Page : 776 pages
File Size : 46,15 MB
Release : 1984
Category :
ISBN :
Author :
Publisher :
Page : 1368 pages
File Size : 29,48 MB
Release : 1983
Category : Aeronautics
ISBN :
Author :
Publisher :
Page : 464 pages
File Size : 19,16 MB
Release : 1985
Category : Highway research
ISBN :