Experimentation Modeling and Computation in Flow, Turbulence and Combustion


Book Description

Volume 2 of this significant work presents previously unpublished cutting-edge lectures from the Third French-Russian Workshop on Fluid Dynamics held in Tashkent in April 1995. Reflecting the Workshop?s main themes, this book particularly focuses on: expermental investigation of unsteady separated flow, 3D configurations, laminar and transitional flows, turbulent shock, shock interaction in hypersonic flow, pressure pulsation in separated flows and jets and high enthalpy flows using wind tunnels. modeling of free surface flows, natural gas combustion, vortical gas flows and acoustic processes in complex channels, non-equilibrium hypersonic viscous flows, wall law for fluids and compressible fluid jets with vortex zones. theoretical predictions of aerodynamic performances with analyses of supersonic combustion, detonation, and sumulation of reactive mixing layer. solution methods for quasilinear parabolic equations and other calculations including incompressible Navier Stokes equations and parabolic equations by Monte-Carlo methods. numerical algorithms for the simulation of atmospheric gas dynamics, kinetic schemes for viscous gas dynamic flows and evolutionary algorithms for complex optimization problems. This book will be of particular interest to all engineers and research scientists in Fluid Dynamics, Aeronautics, Aerospace and Mechanical or Applied Mathematics.




Turbulent Combustion Modeling


Book Description

Turbulent combustion sits at the interface of two important nonlinear, multiscale phenomena: chemistry and turbulence. Its study is extremely timely in view of the need to develop new combustion technologies in order to address challenges associated with climate change, energy source uncertainty, and air pollution. Despite the fact that modeling of turbulent combustion is a subject that has been researched for a number of years, its complexity implies that key issues are still eluding, and a theoretical description that is accurate enough to make turbulent combustion models rigorous and quantitative for industrial use is still lacking. In this book, prominent experts review most of the available approaches in modeling turbulent combustion, with particular focus on the exploding increase in computational resources that has allowed the simulation of increasingly detailed phenomena. The relevant algorithms are presented, the theoretical methods are explained, and various application examples are given. The book is intended for a relatively broad audience, including seasoned researchers and graduate students in engineering, applied mathematics and computational science, engine designers and computational fluid dynamics (CFD) practitioners, scientists at funding agencies, and anyone wishing to understand the state-of-the-art and the future directions of this scientifically challenging and practically important field.




Turbulent Combustion


Book Description

The combustion of fossil fuels remains a key technology for the foreseeable future. It is therefore important that we understand the mechanisms of combustion and, in particular, the role of turbulence within this process. Combustion always takes place within a turbulent flow field for two reasons: turbulence increases the mixing process and enhances combustion, but at the same time combustion releases heat which generates flow instability through buoyancy, thus enhancing the transition to turbulence. The four chapters of this book present a thorough introduction to the field of turbulent combustion. After an overview of modeling approaches, the three remaining chapters consider the three distinct cases of premixed, non-premixed, and partially premixed combustion, respectively. This book will be of value to researchers and students of engineering and applied mathematics by demonstrating the current theories of turbulent combustion within a unified presentation of the field.




Engineering Turbulence Modelling and Experiments 6


Book Description

Proceedings of the world renowned ERCOFTAC (International Symposium on Engineering Turbulence Modelling and Measurements).The proceedings include papers dealing with the following areas of turbulence:·Eddy-viscosity and second-order RANS models ·Direct and large-eddy simulations and deductions for conventional modelling ·Measurement and visualization techniques, experimental studies ·Turbulence control ·Transition and effects of curvature, rotation and buoyancy on turbulence ·Aero-acoustics ·Heat and mass transfer and chemically reacting flows ·Compressible flows, shock phenomena ·Two-phase flows ·Applications in aerospace engineering, turbomachinery and reciprocating engines, industrial aerodynamics and wind engineering, and selected chemical engineering problems Turbulence remains one of the key issues in tackling engineering flow problems. These problems are solved more and more by CFD analysis, the reliability of which depends strongly on the performance of the turbulence models employed. Successful simulation of turbulence requires the understanding of the complex physical phenomena involved and suitable models for describing the turbulent momentum, heat and mass transfer. For the understanding of turbulence phenomena, experiments are indispensable, but they are equally important for providing data for the development and testing of turbulence models and hence for CFD software validation. As in other fields of Science, in the rapidly developing discipline of turbulence, swift progress can be achieved only by keeping up to date with recent advances all over the world and by exchanging ideas with colleagues active in related fields.




Experimentation Modeling and Computation in Flow, Turbulence and Combustion


Book Description

This book presents state-of-the-art lectures on complex flows of fundamental and industrial interest in the subsonic, supersonic and hypersonic regimes. Experimental investigations of unsteady separated flows, high-enthalpy flows, 3D configurations, laminar and transitional flows are addressed. Theoretical predictions of aerodynamic performances are provided along with analyses of supersonic combustion, detonation, simulation of reactive mixing layer and non-equilibrium flow. Computational Fluid Dynamics methods for the simulation of viscous compressible flow, inviscid viscous flow interactions, real-gas effects in rarefied flow, flows about bodies with permeable walls and supersonic turbulent flows are finally developed and analysed.




Engineering Turbulence Modelling and Experiments 5


Book Description

Turbulence is one of the key issues in tackling engineering flow problems. As powerful computers and accurate numerical methods are now available for solving the flow equations, and since engineering applications nearly always involve turbulence effects, the reliability of CFD analysis depends increasingly on the performance of the turbulence models. This series of symposia provides a forum for presenting and discussing new developments in the area of turbulence modelling and measurements, with particular emphasis on engineering-related problems. The papers in this set of proceedings were presented at the 5th International Symposium on Engineering Turbulence Modelling and Measurements in September 2002. They look at a variety of areas, including: Turbulence modelling; Direct and large-eddy simulations; Applications of turbulence models; Experimental studies; Transition; Turbulence control; Aerodynamic flow; Aero-acoustics; Turbomachinery flows; Heat transfer; Combustion systems; Two-phase flows. These papers are preceded by a section containing 6 invited papers covering various aspects of turbulence modelling and simulation as well as their practical application, combustion modelling and particle-image velocimetry.




Experiments and Numerical Simulations of Turbulent Combustion of Diluted Sprays


Book Description

This book reflects the results of the 2nd and 3rd International Workshops on Turbulent Spray Combustion. The focus is on progress in experiments and numerical simulations for two-phase flows, with emphasis on spray combustion. Knowledge of the dominant phenomena and their interactions allows development of predictive models and their use in combustor and gas turbine design. Experts and young researchers present the state-of-the-art results, report on the latest developments and exchange ideas in the areas of experiments, modelling and simulation of reactive multiphase flows. The first chapter reflects on flame structure, auto-ignition and atomization with reference to well-characterized burners, to be implemented by modellers with relative ease. The second chapter presents an overview of first simulation results on target test cases, developed at the occasion of the 1st International Workshop on Turbulent Spray Combustion. In the third chapter, evaporation rate modelling aspects are covered, while the fourth chapter deals with evaporation effects in the context of flamelet models. In chapter five, LES simulation results are discussed for variable fuel and mass loading. The final chapter discusses PDF modelling of turbulent spray combustion. In short, the contributions in this book are highly valuable for the research community in this field, providing in-depth insight into some of the many aspects of dilute turbulent spray combustion.




Research Directions in Computational Mechanics


Book Description

Computational mechanics is a scientific discipline that marries physics, computers, and mathematics to emulate natural physical phenomena. It is a technology that allows scientists to study and predict the performance of various productsâ€"important for research and development in the industrialized world. This book describes current trends and future research directions in computational mechanics in areas where gaps exist in current knowledge and where major advances are crucial to continued technological developments in the United States.







Computational Mechanics


Book Description