Book Description
This research effort was focused on evaluating the feasibility of using minimally processed reclaimed asphalt pavement (RAP) as aggregate replacement in concrete pavements. This research demonstrated that concretes with up to 50 percent of the fine aggregates and 100 percent of the coarse aggregates replaced with RAP were suitable for concrete pavement. A statistical experimental design procedure (response surface methodology - RSM) was used to investigate proportioning RAP concrete mixtures to achieve desired performance criteria. Based on the results of the RSM investigation, two concrete mixtures were selected for further evaluation: a high RAP mix with fine and coarse aggregate replacement rates of 50 and 100 percent respectively, and a "high" strength mix with one half of the RAP used in the high RAP mix. Both mixes met MDT concrete pavement specifications for slump (1.5 inches), air content (6 percent), and 28-day compressive and tensile strengths (3,000 psi and 500 psi, respectively). These two concrete mixtures were subjected to a suite of mechanical and durability tests to evaluate their potential use in Montana roadways. Mechanical properties tested were compressive and tensile strength, elastic modulus, shrinkage, and creep. Durability tests included alkali-silica reactivity, absorption, abrasion, chloride permeability, freeze-thaw resistance, and scaling. Overall, both mixes performed adequately in these mechanical and durability tests, although it is important to note that the inclusion of RAP had an obvious negative impact on nearly every property tested relative to those of control mixes made with 100 percent conventional aggregates.
