Author : https://www.codeofchina.com
Publisher : https://www.codeofchina.com
Page : 38 pages
File Size : 11,49 MB
Release :
Category : Architecture
ISBN :
This part of GB 25974 specifies the terms and definitions, requirements, test methods, inspection rules, marking, packaging, transportation and storage of powered support for coal mines (hereinafter referred to as "support"). This part is applicable to the support used at environment temperatures from 0 ℃ to 60 ℃.
Author : https://www.codeofchina.com
Publisher : https://www.codeofchina.com
Page : 42 pages
File Size : 35,6 MB
Release :
Category : Architecture
ISBN :
This part of GB 25974 specifies the terms and definitions, classification, requirements, test methods, inspection rules, marking, packaging and storage for hydraulic control system and valves of powered support for coal mine (hereinafter referred to as support). This part is applicable to various supports for coal mine and other hydraulic control system and valves with supporting equipment, including various hydraulic control systems, yield valves, pilot check valves, directional valves and shut-off valves. This part is not applicable to valves in pressurizer, power set legs and ram (i.e. foot valve of power set legs).
Author : https://www.codeofchina.com
Publisher : https://www.codeofchina.com
Page : 31 pages
File Size : 35,94 MB
Release :
Category : Architecture
ISBN :
This part of GB 25974 specifies the terms and definitions, requirements, test methods, inspection rules, marking, packaging and storage for power set legs (hereinafter referred to as legs) and rams of powered support for coal mine. This part is applicable to legs and rams of powered support for coal mine.
Author : Intergovernmental Panel on Climate Change. Working Group 2
Publisher :
Page : 93 pages
File Size : 31,26 MB
Release : 2007
Category :
ISBN :
Author : Lin Jinhui
Publisher : Routledge
Page : 141 pages
File Size : 31,58 MB
Release : 2019-10-23
Category : Education
ISBN : 135134658X
During the past decade, transnational education has grown rapidly and become a key initiative of internationalization of higher education. In China, one of the main forms of transnational education is Chinese-foreign Cooperation in Running Schools (CFCRS). In May 2017, there were 2545 CFCRS institutions and programs approved by the Chinese government. There are about 560,000 CFCRS students nationwide, among which 460,000 are in higher education, while graduate numbers have exceeded 1.6 million. CFCRS has attracted more and more attention, and related studies have been increasing over the years. This book contains a comprehensive introduction and in-depth study on CFCRS; and includes comparative studies on the development of international branch campuses of several countries. This volume was originally published as a special issue of Chinese Education and Societies.
Author :
Publisher :
Page : 365 pages
File Size : 30,62 MB
Release : 2018
Category :
ISBN : 9789292592318
Globalisation has had a profound effect on economic outcomes, especially in emerging market economies (EMEs). In particular, it is widely acknowledged to have been a major driver of the strong income growth and reduction in poverty witnessed in EMEs in the past few decades. Despite these benefits, there has recently been a backlash against globalisation and growing support for inward looking policies in many parts of the world. Against this backdrop, this volume takes stock of the EME experience with two facets of globalisation-trade and migration. It summarises different country experiences with regard to the aggregate as well as distributional consequences. In doing so, it highlights several examples and avenues for policy action to continue to harness the benefits of globalisation while limiting the costs.
Author : Gary Leatham
Publisher : Springer Science & Business Media
Page : 235 pages
File Size : 22,60 MB
Release : 2012-12-06
Category : Science
ISBN : 1468471120
Frontiers of Industrial Mycology describes the present efforts underway to create a broad range of large-scale applications using filamentous fungi. Important and environmentally sound applications currently being developed include the use of fungi for novel *B-lactams in antibiotic production, biobleaching and the bioconversion of wood pulp, agricultural biotechnology for creating biological insecticides and herbicides, food fermentations, and the commercial raising of shiitake mushrooms, a growing and largely untapped market in North America. The topics discussed in this volume are on the cutting edge of industrial mycology. This book will thus benefit a wide range of professionals and academics in biotechnology, mycology, microbiology, plant science, entomology, and biochemistry.
Author : De-Wei Li
Publisher : Springer
Page : 651 pages
File Size : 40,80 MB
Release : 2016-03-18
Category : Science
ISBN : 3319291378
This reference book includes 24 chapters written by a group of experts in the different fields of microfungi and cover a broad range of topics on microfungi. It provides the most updated information on the latest development in systematics and taxonomy of microfungi, new techniques which were developed in the last ten years and their application in microfungal research. After the International Code of Nomenclature for algae, fungi, and plants (Melbourne Code) was adopted by the Eighteenth International Botanical Congress Melbourne, Australia, July 2011, it has had a profound impact on mycology and its research. Fungal nomenclature changes and its significance to fungal taxonomy and naming of microfungi in the future is discussed in detail. Since dual names system for fungi developing both sexual and asexual states, and fungi developing only asexual state is no longer available, the first five chapters will clarify some confusion and provides perspective views on the direction for future research. The next nine chapters cover microfungi and their ecological roles or functions in the different habitats (air, indoor, aquatic, marine, plants, soils, etc). The remaining 13 chapters cover the relationship of microfungi and humans (good and bad) and usage or application microfungi in different industries, such as food, agriculture, forestry, green technology, pharmaceutics, and medicine, as well as in our daily life. The book bridges the gap between basic mycological research and applied mycology and provide readers a unique set of information and knowledge of microfungi generated from multiple angles in different fields of mycology.
Author : T. M. L. Wigley
Publisher : Cambridge University Press
Page : 312 pages
File Size : 49,85 MB
Release : 2005-08-22
Category : Science
ISBN : 9780521018623
Reducing carbon dioxide (CO2) emissions is imperative to stabilizing our future climate. Our ability to reduce these emissions combined with an understanding of how much fossil-fuel-derived CO2 the oceans and plants can absorb is central to mitigating climate change. In The Carbon Cycle, leading scientists examine how atmospheric carbon dioxide concentrations have changed in the past and how this may affect the concentrations in the future. They look at the carbon budget and the "missing sink" for carbon dioxide. They offer approaches to modeling the carbon cycle, providing mathematical tools for predicting future levels of carbon dioxide. This comprehensive text incorporates findings from the recent IPCC reports. New insights, and a convergence of ideas and views across several disciplines make this book an important contribution to the global change literature.
Author : Dan O'Connell
Publisher : Ian Allan Publishing
Page : 0 pages
File Size : 20,42 MB
Release : 2005
Category : Messerschmitt 262 (Jet fighter plane)
ISBN : 9781903223598
This is an essential work of reference on the history of the world's first operational jet fighter, the Me 262. First flown as a pure jet on 18th July 1942, on 25th July 1944 an Me 262 became the first jet aircraft used in combat when it attacked a British photo-reconnaissance Mosquito flying over Munich. Some 1,500 Me 262s were built but less than 20% of these actually flew in combat. Most remained on the ground awaiting bomber conversion, or were unable to fly because of lack of fuel, spare parts or trained pilots. This is the first time that a detailed summary of every known and identified Me 262 has been compiled. Some 1200 of the 1500 aircraft constructed have been identified. The book lists sequentially each aircraft by Werknummer (Works Number) from prototypes and test aircraft through to all variants of operational machines, together with known pilots, assigned units and recorded flights. Where known the fate of each individual aircraft is given and where possible, a photo of each aircraft will accompany its entry in the Werknummer log.
