Book Description

Load and Resistance Factor Design (LRFD) shows promise as a viable alternative to the present working stress design (WSD) approach to foundation design. The key improvements of LRFD over the traditional Working Stress Design (WSD) are the ability to provide a more consistent level of reliability and the possibility of accounting for load and resistance uncertainties separately. In order for foundation design to be consistent with current structural design practice, the use of the same loads, load factors and load combinations would be required. In this study, we review the load factors presented in various LRFD Codes from the US, Canada and Europe. For LRFD to gain acceptance in geotechnical engineering, a framework for the objective assessment of resistance factors is needed. Such a framework, based on reliability analysis is proposed in this study. Probability Density Functions (PDFs), representing design variable uncertainties, are required for analysis. A systematic approach to the selection of PDFs is presented. Such a procedure is a critical prerequisite to a rational probabilistic analysis in the development of LRFD methods in geotechnical engineering. Additionally, in order for LRFD to fulfill its promise for designs with more consistent reliability, the methods used to execute a design must be consistent with the methods assumed in the development of the LRFD factors. In this study, a methodology for the estimation of soil parameters for use in design equations is proposed that should allow for more statistical consistency in design inputs than is possible in traditional methods. Resistance factor values are dependent upon the values of load factors used. Thus, a method to adjust the resistance factors to account for code-specified load factors is also presented. The various considered methods obtain their input parameters from the CPT, the SPT, or laboratory testing. Designers may wish to use design methods that are not considered in this study. As such, the designer needs the capability to select resistance factors that reflect the uncertainty of the design method chosen. A methodology is proposed in this study to accomplish this task, in a way that is consistent with the framework.