Magnetoelectric Polymer-Based Composites


Book Description

The first book on this topic provides a comprehensive and well-structured overview of the fundamentals, synthesis and emerging applications of magnetoelectric polymer materials. Following an introduction to the basic aspects of polymer based magnetoelectric materials and recent developments, subsequent chapters discuss the various types as well as their synthesis and characterization. There then follows a review of the latest applications, such as memories, sensors and actuators. The book concludes with a look at future technological advances. An essential reference for entrants to the field as well as for experienced researchers.




Magnetoelectric Polymer-Based Composites


Book Description

The first book on this topic provides a comprehensive and well-structured overview of the fundamentals, synthesis and emerging applications of magnetoelectric polymer materials. Following an introduction to the basic aspects of polymer based magnetoelectric materials and recent developments, subsequent chapters discuss the various types as well as their synthesis and characterization. There then follows a review of the latest applications, such as memories, sensors and actuators. The book concludes with a look at future technological advances. An essential reference for entrants to the field as well as for experienced researchers.




Ferrites and Multiferroics


Book Description

This book highlights the fundamentals of ferrites and multiferroic materials with special attention to their structure, types, and properties. It presents a comprehensive survey about ferrite and multiferroic materials, in areas significant to research and development in academia as well as in industry. The book discusses various types of methods applied for their synthesis and characterizations. This book is concerned with the fascinating class of materials with the promise for wide-ranging applications, including electromagnets, magnetic fluid hyperthermia, antenna applications, memory devices, switching circuits, bio-medical applications, actuators, magnetic field sensors and water purification, etc.




Nanostructured Thin Films


Book Description

Nanostructured Thin Films: Fundamentals and Applications presents an overview of the synthesis and characterization of thin films and their nanocomposites. Both vapor phase and liquid phase approaches are discussed, along with the methods that are sufficiently attractive for large-scale production. Examples of applications in clean energy, sensors, biomedicine, anticorrosion and surface modification are also included. As the applications of thin films in nanomedicine, cell phones, solar cell-powered devices, and in the protection of structural materials continues to grow, this book presents an important research reference for anyone seeking an informed overview on their structure and applications. - Shows how thin films are being used to create more efficient devices in the fields of medicine and energy harvesting - Discusses how to alter the design of nanostructured thin films by vapor phase and liquid phase methods - Explores how modifying the structure of thin films for specific applications enhances their performance




Engineered Polymer Nanocomposites for Energy Harvesting Applications


Book Description

Engineered Polymer Nanocomposites for Energy Harvesting Applications looks at materials engineering, characterization and design aspects of mechanical energy harvesting devices for superior performance. Tapping into electrical energy from various mechanical stimuli, such as stress, elongation, tension and vibration has been getting substantial research attention, however, there are many challenges associated with the development energy harvesters with efficient conversion capabilities. This title consolidates a broad spectrum of material engineering and devices design research into one resource and will be an invaluable reference for those working in this field. - Provides an interdisciplinary book focused on the engineering of high performance polymer-based nanocomposites and design strategies of high performance energy harvesting - Written by leading researchers in the field of materials science, polymer science and nanotechnology from industry, academia, government and private research institutions across the globe - Includes broad coverage of specific analytical techniques that will assist researchers to solve fundamental and applied problems in the development of materials for energy harvesting applications




Multiferroic Materials


Book Description

"a very detailed book on multiferroics that will be useful for PhD students and researchers interested in this emerging field of materials science" —Dr. Wilfrid Prellier, Research Director, CNRS, Caen, France Multiferroics has emerged as one of the hottest topics in solid state physics in this millennium. The coexistence of multiple ferroic/antiferroic properties makes them useful both for fundamental studies and practical applications such as revolutionary new memory technologies and next-generation spintronics devices. This book provides an historical introduction to the field, followed by a summary of recent progress in single-phase multiferroics (type-I and type-II), multiferroic composites (bulk and nano composites), and emerging areas such as domain walls and vortices. Each chapter addresses potential technological implications. There is also a section dedicated to theoretical approaches, both phenomenological and first-principles calculations.




Magnetoelectric Composites


Book Description

This book is dedicated to modeling and application of magnetoelectric (ME) effects in layered and bulk composites based on magnetostrictive and piezoelectric materials. Currently, numerous theoretical and experimental studies on ME composites are available but few on the development and research of instruments based on them. So far, only investigation of ME magnetic field sensors has been cited in the existing literature. However, these studies have finally resulted in the creation of low-frequency ME magnetic field sensors with parameters substantially exceeding the characteristics of Hall sensors. The book presents the authors’ many years of experience gained in ME composites and through creation of device models based on their studies. It describes low-frequency ME devices, such as current and position sensors and energy harvesters, and microwave ME devices, such as antennas, attenuators, filters, gyrators, and phase shifters.




Progress In Advanced Dielectrics


Book Description

Dielectrics is becoming increasingly important due to the rapid developments in electronics, optoelectronics, photonics and nanotechnology. In the past two decades, research on advanced dielectric materials and related applications has undergone an accelerated growth, due in larger part to the discovery of the superior piezoelectric properties in relaxor single crystals, the development of the lead-free piezoelectric/ferroelectric materials and the renaissance of the multiferroics.This book contains 9 feature articles which, together, provide a comprehensive account on the current state of advanced dielectrics and related phenomena. The first two articles present fundamental knowledge related to the characterization of ferroelectric hysteresis, which is the most widely used method to learn the ferroelectricity experimentally. The latest research progress in relaxor ferroelectric is given in the next two articles. The last five articles are dedicated to the multi-functionality of advanced dielectrics, with emphasis on multiferroic magnetoelectric composites, lead-free piezoceramics, pyroelectric/electrocaloric materials, polymer-based dielectrics, and flexible nanodielectrics.




Ferroelectric Materials for Energy Harvesting and Storage


Book Description

The need to more efficiently harvest energy for electronics has spurred investigation into materials that can harvest energy from locally abundant sources. Ferroelectric Materials for Energy Harvesting and Storage is the first book to bring together fundamental mechanisms for harvesting various abundant energy sources using ferroelectric and piezoelectric materials. The authors discuss strategies of designing materials for efficiently harvesting energy sources like solar, wind, wave, temperature fluctuations, mechanical vibrations, biomechanical motion, and stray magnetic fields. In addition, concepts of the high density energy storage using ferroelectric materials is explored. Ferroelectric Materials for Energy Harvesting and Storage is appropriate for those working in materials science and engineering, physics, chemistry and electrical engineering disciplines. - Reviews wide range of energy harvesting including solar, wind, biomechanical and more - Discusses ferroelectric materials and their application to high energy density capacitors - Includes review of fundamental mechanisms of energy harvesting and energy solutions, their design and current applications, and future trends and challenges




Fascinating Fluoropolymers and Their Applications


Book Description

Fluoropolymers are unique materials. Since the middle of the twentieth century fluropolymers have been used in applications where a wide temperature range, a high resistance to aggressive media, excellent tribological characteristics, and specific low adhesion are required. Today, researchers turn to fluoropolymers to solve new challenges and to develop materials with previously unattainable properties. Fascinating Fluoropolymers and Their Applications covers recent developments of fluoropolymer applications in energy, optical fibers, blood substitutes, textile coatings, membranes and other areas, written by experts in these fields. This volume in the Progress in Fluorine Science series is ideal for researchers and engineers who want to learn about the technology and applications of these special polymers, as well as industrial manufacturers who are interested in achieving new product characteristics in their respective industries. - Written by a global team of fluoropolymer experts - Includes use of fluoropolymer membranes for various applications in fuel cells, for gases separation, and more - Covers fluoropolymer materials with shape memory, in cardiopulmonary bypass systems, in the production of textile materials, and in other areas