Nanodevices for Microwave and Millimeter Wave Applications


Book Description

The microwave and millimeter wave frequency range is nowadays widely exploited in a large variety of fields including (wireless) communications, security, radar, spectroscopy, but also astronomy and biomedical, to name a few. This Special Issue focuses on the interaction between the nanoscale dimensions and centimeter to millimeter wavelengths. This interaction has been proven to be efficient for the design and fabrication of devices showing enhanced performance. Novel contributions are welcome in the field of devices based on nanoscaled geometries and materials. Applications cover, but not are limited to, electronics, sensors, signal processing, imaging and metrology, all exploiting nanoscale/nanotechnology at microwave and millimeter waves. Contributions can take the form of short communications, regular or review papers.




Advanced Materials and Technologies for Micro/Nano-Devices, Sensors and Actuators


Book Description

A NATO Advanced Research Workshop (ARW) entitled “Advanced Materials and Technologies for Micro/Nano Devices, Sensors and Actuators” was held in St. Petersburg, Russia, from June 29 to July 2, 2009. The main goal of the Workshop was to examine (at a fundamental level) the very complex scientific issues that pertain to the use of micro- and nano-electromechanical systems (MEMS and NEMS), devices and technologies in next generation commercial and defen- related applications. Micro- and nano-electromechanical systems represent rather broad and diverse technological areas, such as optical systems (micromirrors, waveguides, optical sensors, integrated subsystems), life sciences and lab equipment (micropumps, membranes, lab-on-chip, membranes, microfluidics), sensors (bio-sensors, chemical sensors, gas-phase sensors, sensors integrated with electronics) and RF applications for signal transmission (variable capacitors, tunable filters and antennas, switches, resonators). From a scientific viewpoint, this is a very multi-disciplinary field, including micro- and nano-mechanics (such as stresses in structural materials), electronic effects (e. g. charge transfer), general electrostatics, materials science, surface chemistry, interface science, (nano)tribology, and optics. It is obvious that in order to overcome the problems surrounding next-generation MEMS/NEMS devices and applications it is necessary to tackle them from different angles: theoreticians need to speak with mechanical engineers, and device engineers and modelers to listen to surface physicists. It was therefore one of the main objectives of the workshop to bring together a multidisciplinary team of distinguished researchers.




Beyond-CMOS Nanodevices 1


Book Description

This book offers a comprehensive review of the state-of-the-art in innovative Beyond-CMOS nanodevices for developing novel functionalities, logic and memories dedicated to researchers, engineers and students. It particularly focuses on the interest of nanostructures and nanodevices (nanowires, small slope switches, 2D layers, nanostructured materials, etc.) for advanced More than Moore (RF-nanosensors-energy harvesters, on-chip electronic cooling, etc.) and Beyond-CMOS logic and memories applications.




Nanoscale Microwave Engineering


Book Description

This book targets new trends in microwave engineering by downscaling components and devices for industrial purposes such as miniaturization and function densification, in association with the new approach of activation by a confined optical remote control. It covers the fundamental groundwork of the structure, property, characterization methods and applications of 1D and 2D nanostructures, along with providing the necessary knowledge on atomic structure, how it relates to the material band-structure and how this in turn leads to the amazing properties of these structures. It thus provides new graduates, PhD students and post-doctorates with a resource equipping them with the knowledge to undertake their research.




MEMS and Nanotechnology-Based Sensors and Devices for Communications, Medical and Aerospace Applications


Book Description

The integration of microelectromechanical systems (MEMS) and nanotechnology (NT) in sensors and devices significantly reduces their weight, size, power consumption, and production costs. These sensors and devices can then play greater roles in defense operations, wireless communication, the diagnosis and treatment of disease, and many more applications. MEMS and Nanotechnology-Based Sensors and Devices for Communications, Medical and Aerospace Applications presents the latest performance parameters and experimental data of state-of-the-art sensors and devices. It describes packaging details, materials and their properties, and fabrication requirements vital for design, development, and testing. Some of the cutting-edge materials covered include quantum dots, nanoparticles, photonic crystals, and carbon nanotubes (CNTs). This comprehensive work encompasses various types of MEMS- and NT-based sensors and devices, such as micropumps, accelerometers, photonic bandgap devices, acoustic sensors, CNT-based transistors, photovoltaic cells, and smart sensors. It also discusses how these sensors and devices are used in a number of applications, including weapons’ health, battlefield monitoring, cancer research, stealth technology, chemical detection, and drug delivery.




Millimeter-Wave Circuits for 5G and Radar


Book Description

Discover the concepts, architectures, components, tools, and techniques needed to design millimeter-wave circuits for current and emerging wireless system applications. Focusing on applications in 5G, connectivity, radar, and more, leading experts in radio frequency integrated circuit (RFIC) design provide a comprehensive treatment of cutting-edge physical-layer technologies for radio frequency (RF) transceivers - specifically RF, analog, mixed-signal, and digital circuits and architectures. The full design chain is covered, from system design requirements through to building blocks, transceivers, and process technology. Gain insight into the key novelties of 5G through authoritative chapters on massive MIMO and phased arrays, and learn about the very latest technology developments, such as FinFET logic process technology for RF and millimeter-wave applications. This is an essential reading and an excellent reference for high-frequency circuit designers in both academia and industry.




Progress in Nanotechnology


Book Description

This edition of the Progress in Ceramic Technology series is a select compilation of articles on nanotechnology applications and markets previously published in ACerS publications, including The American Ceramic Society Bulletin, Journal of the American Ceramic Society, International Journal of Applied Ceramic Technology, Ceramic Engineering and Science Proceedings (CESP) and Ceramic Transactions (CT). The American Ceramic Society contributes to the progress of nanotechnology by providing forums for information exchange during its various meetings and by publishing articles in its various journals and proceedings.




Nanotechnology For Electronics, Biosensors, Additive Manufacturing And Emerging Systems Applications


Book Description

Published as part of the well-established book series, Selected Topics in Electronics and Systems, this compendium features 18 peer reviewed articles focusing on high-performance materials and emerging devices for implementation in high-speed electronic systems.Wide-ranging topics span from novel materials and devices, biosensors and bio-nano-systems, artificial intelligence, robotics and emerging technologies, to applications in each of these fields.Systems for implementing data with security tokens; single chemical sensor for multi-analyte mixture detection; RF energy harvesters; additively manufactured RF devices for 5G, IoT, RFID and smart city applications are also prominently included.Written by eminent researchers, recent developments also highlight equivalent circuits models at room temperature and 4.2 K; quantum dot nonvolatile memories, 3D-confined quantum dot channel (QDC) and spatial wavefunction switched (SWS) FETs for high-speed multi-bit logic and novel system applications.




Fundamentals of Microfabrication and Nanotechnology, Three-Volume Set


Book Description

Now in its third edition, Fundamentals of Microfabrication and Nanotechnology continues to provide the most complete MEMS coverage available. Thoroughly revised and updated the new edition of this perennial bestseller has been expanded to three volumes, reflecting the substantial growth of this field. It includes a wealth of theoretical and practical information on nanotechnology and NEMS and offers background and comprehensive information on materials, processes, and manufacturing options. The first volume offers a rigorous theoretical treatment of micro- and nanosciences, and includes sections on solid-state physics, quantum mechanics, crystallography, and fluidics. The second volume presents a very large set of manufacturing techniques for micro- and nanofabrication and covers different forms of lithography, material removal processes, and additive technologies. The third volume focuses on manufacturing techniques and applications of Bio-MEMS and Bio-NEMS. Illustrated in color throughout, this seminal work is a cogent instructional text, providing classroom and self-learners with worked-out examples and end-of-chapter problems. The author characterizes and defines major research areas and illustrates them with examples pulled from the most recent literature and from his own work.




Proceedings of 16th International Conference on Emerging Materials and Nanotechnology 2018


Book Description

Mar 22-23, 2018 London, UK Key Topics : Materials and Devices, Emerging Materials for Energy Storage, Materials Science and Engineering, Next-Generation Materials, Nanotechnology in Materials Science, Energy Materials, Mining and Metallurgy, Surface Science and Engineering, Biomaterials and Tissue Engineering, Materials Characterization, Polymer Technology, Electrical, Optical and Magnetic Materials, Materials Chemistry and Physics, Advanced Materials, Materials Applications