Pile Driving Analysis for Pile Design and Quality Assurance


Book Description

Driven piles are commonly used in foundation engineering. The most accurate measurement of pile capacity is achieved from measurements made during static load tests. Static load tests, however, may be too expensive for certain projects. In these cases, indirect estimates of the pile capacity can be made through dynamic measurements. These estimates can be performed either through pile driving formulae or through analytical methods, such as the Case method.Pile driving formulae, which relate the pile set per blow to the capacity of the pile, are frequently used to determine whether the pile has achieved its design capacity. However, existing formulae have numerous shortcomings. These formulae are based on empirical observations and lack scientific validation. This report details the development of more accurate and reliable pile driving formulae developed from advanced one-dimensional FE simulations. These formulae are derived for piles installed in five typical soil profiles: a floating pile in sand, an end¿bearing pile in sand, a floating pile in clay, an end¿bearing pile in clay and a pile crossing a normally consolidated clay layer and resting on a dense sand layer. The proposed driving formulae are validated through well-documented case histories of full-scale instrumented driven piles. The proposed formulae are more accurate and reliable on average than other existing methods for the case histories considered in this study.This report also discusses the development of a pile driving control system, a fully integrated system developed by Purdue that can be used to collect, process, and analyze data to estimate the capacities of piles using the Case method and the pile driving formulae developed at Purdue.




Application of Stress-Wave Theory to Piles: Quality Assurance on Land and Offshore Piling


Book Description

This work collates the topics discussed in the sixth International Conference on land and offshore piling. It covers topics such as: wave mechanics and its application to pile mechanics; driving equipment and developments; and pile integrity and low strain dynamic testing.




Foundation Engineering Analysis and Design


Book Description

One of the core roles of a practising geotechnical engineer is to analyse and design foundations. This textbook for advanced undergraduates and graduate students covers the analysis, design and construction of shallow and deep foundations and retaining structures as well as the stability analysis and mitigation of slopes. It progressively introduces critical state soil mechanics and plasticity theories such as plastic limit analysis and cavity expansion theories before leading into the theories of foundation, lateral earth pressure and slope stability analysis. On the engineering side, the book introduces construction and testing methods used in current practice. Throughout it emphasizes the connection between theory and practice. It prepares readers for the more sophisticated non-linear elastic-plastic analysis in foundation engineering which is commonly used in engineering practice, and serves too as a reference book for practising engineers. A companion website provides a series of Excel spreadsheet programs to cover all examples included in the book, and PowerPoint lecture slides and a solutions manual for lecturers. Using Excel, the relationships between the input parameters and the design and analysis results can be seen. Numerical values of complex equations can be calculated quickly. non-linearity and optimization can be brought in more easily to employ functioned numerical methods. And sophisticated methods can be seen in practice, such as p-y curve for laterally loaded piles and flexible retaining structures, and methods of slices for slope stability analysis.




Pile Driving by Pile Buck


Book Description

The definitive reference for driven piles. Nearly six years in the making, Pile Driving by Pile Buck is a comprehensive reference book on the history of pile driving and driven piles, the various types of piles, the equipment used to install them, the design of driven pile foundations, the installation of driven piles and the capacity verification of driven piles. Not just another theoretical exercise, Pile Driving by Pile Buck gives practical procedures and equipment configurations for the successful installation of virtually any driven pile foundations. Included with the text are a wealth of photographs without equal in this type of publication; the photos alone are worth the price of the book, and help bring the reader "on site" to understand the whole process of pile driving--one of the oldest construction techniques known.




Developing Production Pile Driving Criteria from Test Pile Data


Book Description

TRB’s National Cooperative Highway Research Program (NCHRP) Synthesis 418: Developing Production Pile Driving Criteria from Test Pile Data provides information on the current practices used by state transportation agencies to develop pile driving criteria, with special attention paid to the use of test pile data in the process.




Pile Design and Construction Practice, Fifth Edition


Book Description

This international handbook is essential for geotechnical engineers and engineering geologists responsible for designing and constructing piled foundations. It explains general principles and practice and details current types of pile, piling equipment and methods. It includes calculations of the resistance of piles to compressive loads, pile groups under compressive loading, piled foundations for resisting uplift and lateral loading and the structural design of piles and pile groups. Marine structures, miscellaneous problems (including machinery foundations, underpinning, mining subsidence areas, contracts and frozen ground), durability of piled foundations, ground investigations, and pile testing are also covered. It introduces the 2005 version of Eurocode7, BS 8004 and other codes, and refers to BS 6349 on maritime structures, and new forms of civil engineering contracts suitable for piling projects. It includes numerous worked examples to the codes, many based on actual problems. It also gives very comprehensive information for students.




Analysis and Design of Geotechnical Structures


Book Description

Analysis and design of geotechnical structures combines, in a single endeavor, a textbook to assist students in understanding the behavior of the main geotechnical works and a guide for practising geotechnical engineers, designers, and consultants. The subjects are treated in line with limit state design, which underpins the Eurocodes and most North America design codes. Instructors and students will value innovative approaches to numerous issues refined by the experience of the author in teaching generations of enthusiastic students. Professionals will gain from its comprehensive treatment of the topics covered in each chapter, supplemented by a plethora of informative material used by consultants and designers. For the benefit of both academics and professionals, conceptual exercises and practical geotechnical design problems are proposed at the end of most chapters. A final annex includes detailed resolutions of the exercises and problems.




Advances in Asian Mechanism and Machine Science


Book Description

This book presents the proceedings of the 6th IFToMM Asian Mechanisms and Machine Science Conference (Asian MMS), held in Hanoi, Vietnam on December 15-18, 2021. It includes peer-reviewed papers on the latest advances in mechanism and machine science, discussing topics such as biomechanical engineering, computational kinematics, the history of mechanism and machine science, gearing and transmissions, multi-body dynamics, robotics and mechatronics, the dynamics of machinery, tribology, vibrations, rotor dynamics and vehicle dynamics. A valuable, up-to-date resource, it offers an essential overview of the subject for scientists and practitioners alike, and will inspire further investigations and research.




Application of Stress-wave Theory to Piles


Book Description

Comprising 97 papers on Geotechnical & environmental aspects (Pile-soil modelling, vibrations); Dynamic testing (Equipment & data acquisition systems); Performance during installation (Driving equipment, hammer-pile-soil system); Reliability of predictions (Theory versus experiment and simulation). Each part starts with a lecture by invited keynote speakers; followed by a general report on the papers. New themes considered are environmental aspects related to vibration and noise & the reliability of predictions emphasizing the validation of theoretical methods & practical experience.