Post-harvest Tobacco Infestation Control


Book Description

In this manual, Post-harvest Tobacco Infestation Control, we have addressed the 'state-of-the-art' and given little account of obsolete techniques. With contributing authors from international cigarette manufacturers, plus consultation with the worldwide tobacco industry, we have recorded the acceptable methodology for infestation management. This manual fills a void, as the most recent treatment of this subject was more than 20 years 350 ago. Major emphasis is on sanitation which should, where possible, reduce or replace pesticide use at all stages of tobacco processing. This manual is divided into an introduction and chapters dealing with: biology, monitoring, sanitation, physical control and insecticides - with separate chapters on insect growth regulators and fumigation. At the end, a few case histories are outlined to show how this integrated approach to infestation control is put into practice. Comments from users of this manual regarding general usefulness, omissions and/or corrections are welcome and should be addressed to CORESTA, the infestation control subgroup of the Phytopathology group. Introduction 1 Tobacco is vulnerable to many insect pests while growing in the 13 357 field. 4. 3 • Farmers may use pesticides to help control some insects and avoid losing up to 40% of the growing crop. Two insects, the cigarette beetle (Lasioderma serricorne) and the tobacco moth (Ephestia elutella), feed on cured tobacco leaves, whether air-cured burley, sun-cured oriental, flue-cured or tobacco by-products (Chapter 2).




Alternatives to Methyl Bromide


Book Description

Methyl bromide, a potent pest control chemical, was identified as an ozone depleting substance (ODS) in 1972. The phase out of this toxic chemical presents a special challenge. To replace methyl bromide, users around the world must have access to reliable and useful technical information. This publication was produced by the United Nations Environment Programme to promote the methyl bromide phase out. It allows the reader to carefully and thoroughly assess many available alternatives and decide on the best option for their situation. The publication also provides addresses of suppliers and specialists in alternatives; references and websites; and contacts for implementing agencies.




2002 Report of the Methyl Bromide Technical Options Committee


Book Description

The Methyl Bromide Technical Options Committee (MBTOC) was established by parties to the Montreal Protocol on Substances that Deplete the Ozone Layer to identify existing and potential alternatives to methyl bromide (MB). This 2002 Assessment reports on MB usage, the quantities produced and consumed, and existing and potential alternate treatments for its use as a fumigant.




Atlas of Stored-Product Insects and Mites


Book Description

No other reference offers such an extensive hands-on guide to the most common stored-product pests. Atlas of Stored-Product Insects and Mites includes photographs and summary information for each of the 235 stored product insect species. Summary information includes common names, synonyms for scientific names, records of geographic distribution, suitability of commodities as insect food and commodity infestation, literature citations for life history studies and a list of natural enemies. Similar summary information is provided for 280 species of mites (Acari) reported to be associated with stored products. The high quality photographs and summary information make this reference essential to the fast and accurate specific identification needed for effective pest management. The authors also cover the tools and information that should be considered when developing a pest management program and provide reference sources for additional information on pest management. Atlas of Stored-Product Insects and Mites will make solving stored-product pest problems faster and easier making this an essential desk reference for anyone working with stored-product insects or mites. Special features High quality color photographs for 235 species of stored product insects Common names and synonyms for 235 insect and 280 mite species Suitability of 537 commodities as food for 84 stored product insect species Summarizes 15,611 infestation records for 1010 commodities reported in the literature References for life history studies of insect and mite species Geographic distribution of each species List of natural enemies Discussion of tools and information needed for pest management An essential reference for: Extension personnel Food industry sanitarians Food industry managers Legislators Pest management professionals Pest management consultants Plant quarantine inspectors Regulators Seed technologists Stored-product entomologist Stored-product acarologists Students Urban entomologists







Agricultural Insect Pests and Their Control, 2nd Ed.


Book Description

This book has been mainly written keeping in view the requirements of the students of Agricultural Entomology of various Universities. The book provides a brief account on the structure, function, development and metamorphosis, and a comprehensive account on almost all the methods of pest control. The nature of damage caused by the important insect pests of crops, their life histories and control have been described. It is hoped that the students of Agricultural Entomology, will find the book extremely useful. The book is also useful to the Plant Protection Departments and similar Institutions. The book will also be useful to those who are preparing for competitive examinations conducted by various central and state Government agencies for recruitment. Every attempt has been made to provide necessary information from the point of view of students of Agricultural Entomology, which is not available in other books.




1998 Assessment of Alternatives to Methyl Bromide


Book Description




Integrated Pest Management


Book Description

The past decade is probably unparalleled as a period of dynamic changes in the crop protection sciences-entomology, plant pathology, and weed science. These changes have been stimulated by the broad-based concern for a quality environment, by the hazard of intensified pest damage to our food and fiber production systems, by the inadequacies and spiraling costs of conventional crop protection programs, by the toxicological hazards of unwise pesticide usage, and by the negative interactions of independent and often narrowly based crop protection practices. During this period, the return to ecological approaches in crop protection was widely accepted, first within entomology and ultimately within the other crop protection and related disciplines. Integrated pest management is fast becoming accepted as the rubric describing a crop pro tection system that integrates methodologies across all crop protection dis ciplines in a fashion that is compatible with the crop production system. Much has been written and spoken about "integrated control" and "pest management," but to date no treatise has been devoted to the concept of "in tegrated pest management" in the broadened context as described above. Most of the manuscripts in this volume were developed from papers presented in a symposium at the annual meeting of the American Association for the Ad vancement of Science held in San Francisco in February, 1974. In arranging that symposium, the editors involved plant pathologists, entomologists, and weed scientists.




Fundamentals of Stored-Product Entomology


Book Description

This reference discusses the fundamentals of stored-product entomology that need to be considered in planning, implementation, and evaluation of a pest management program. It is based on the review of an extensive database of references and many years of research on stored-product insect problems by the expert authors. The information in this book helps answer consumers’ concern about pesticide residues in food by providing helpful IPM and alternative approaches for pest management. It provides the basic information needed to manage pests with and without the use of chemicals. Managing pests requires a thorough understanding of insect biology, behavior, ecology, sampling, pros and cons of management options, and responses of insects to the various management options. This comprehensive book covers all of these topics, beginning with a discussion of the scope of stored-product entomology. It also provides insight into the diversity of foods and habitats utilized by stored-product insects, the types of economic losses attributable to them, and the ways in which an understanding of their biology can be used to study or manage these insects. Insect mobility, sources of insect infestation, sampling, life history, and population growth are discussed as well, as they play an important role in developing an effective sampling program. In addition, decision aids, the cost of management methods, and the resistance of insects to management methods are covered. For insight into the thought process of choosing treatment options, eight pest management methods are thoroughly described, including a statement of the basic operating principle and background information. For help choosing various chemical and nonchemical methods for diverse situations, the advantages, disadvantages and implementation options for each method are given. Students, extension educators, consultants, food industry sanitarians and managers, legislators, regulators, and insect pest management professionals are sure to find information that will help them to improve pest management. Study questions at the end of each chapter Suggested supplemental reading, including books, conference proceeding papers, literature reviews, research papers, government publications, and popular articles General overview of the biology for a basic understanding of pest control issues Guides the reader through the thought process of designing a pest control program or research study Images of the most damaging of stored-product insect pest species for identification of families Quick methods for distinguishing closely related stored-product insect species




Heat Treatments for Postharvest Pest Control


Book Description

Due to the nature of agricultural commodities as carriers of exotic pests, importing countries have employed varying methods of pest control for postharvest products. Thermal treatments are emerging as effective, environmentally-friendly alternatives to traditional methods, eliminating chemical residues and minimizing damage to produce. This book provides comprehensive information of these increasingly important treatments, covering temperature measurement, heat transfer, physiological responses of plants, insects and pathogens to heat, and an introduction to current and potential quarantine treatments based on hot air, hot water, and radio frequency energy.