Safety of Nuclear Power Plants


Book Description

On the basis of the principles included in the Fundamental Safety Principles, IAEA Safety Standards Series No. SF-1, this Safety Requirements publication establishes requirements applicable to the design of nuclear power plants. It covers the design phase and provides input for the safe operation of the power plant. It elaborates on the safety objective, safety principles and concepts that provide the basis for deriving the safety requirements that must be met for the design of a nuclear power plant. Contents: 1. Introduction; 2. Applying the safety principles and concepts; 3. Management of safety in design; 4. Principal technical requirements; 5. General plant design; 6. Design of specific plant systems.




Design for Reactor Core Safety in Nuclear Power Plants


Book Description

Covers the mechanical, chemical, thermal, hydraulic, neutronic and irradiation considerations important to the safe design of a nuclear reactor core. The core features of commonly used reactor types including light and heavy water reactors, as well as gas cooled reactors, are addressed.




Design of the Reactor Containment and Associated Systems for Nuclear Power Plants


Book Description

This Safety Guide provides recommendations on meeting the requirements of IAEA Safety Standards Series No. SSR-2/1 (Rev. 1) relevant to reactor containment and associated systems. The publication addresses the containment structure and the systems with the functions of isolation, control and management of mass and energy releases, control and limitation of radioactive releases, and control and management of combustible gases. The Safety Guide is intended for use primarily for land based, stationary nuclear power plants with water cooled reactors designed for electricity generation or for other heat generating applications, such as for district heating or desalination.




Basic Safety Principles for Nuclear Power Plants


Book Description

The present report is a revision of Safety Series No. 75-INSAG-3 (1988), updating the statements made on the objectives and principles of safe design and operation for electricity generating nuclear power plants. It includes the improvements made in the safety of operating nuclear power plants and identifies the principles underlying the best current safety policies to be applied in future plants. It presents INSAG's understanding of the principles underlying the best current safety policies and practices of the nuclear power industry.




Advanced Security and Safeguarding in the Nuclear Power Industry


Book Description

Advanced Security and Safeguarding in the Nuclear Power Industry: State of the art and future challenges presents an overview of a wide ranging scientific, engineering, policy, regulatory, and legal issues facing the nuclear power industry. Editor Victor Nian and his team of contributors deliver a much needed review of the latest developments in safety, security and safeguards ("Three S's”) as well as other related and important subject matters within and beyond the nuclear power industry. This book is particularly insightful to countries with an interest in developing a nuclear power industry as well as countries where education to improve society's opinion on nuclear energy is crucial to its future success. Advanced Security and Safeguarding in the Nuclear Power Industry covers the foundations of nuclear power production as well as the benefits and impacts of radiation to human society, international conventions, treaties, and standards on the "Three S's”, emergency preparedness and response, and civil liability in the event of a nuclear accident.




Design of Electrical Power Systems for Nuclear Power Plants


Book Description

This Safety Guide provides recommendations on the necessary characteristics of electrical power systems for nuclear power plants, and of the processes for developing these systems, in order to meet the safety requirements of IAEA Safety Standards Series No. SSR-2/1 (Rev. 1). It reflects the changes that have been made to SSR-2/1, in particular to Requirement 68 on Emergency Power Supply.




Fire Protection in Nuclear Power Plants


Book Description

Please note: this publication is superseded by NS-G-1.7




The Tolerability of Risk from Nuclear Power Stations


Book Description

This document replaces the statement and proposals made in the discussion document Tolerability of Risk form Nuclear Power Stations published in 1988. It represents a revision of the earlier document in the light of comments received and of the discussion on the document during the Hinkley Point Inquiry and in the Inquiry report.




Safety Classification of Structures, Systems and Components in Nuclear Power Plants


Book Description

This Safety Guide provides recommendations and guidance on how to meet the requirements established in Specific Safety Requirements No. SSR-2/1 and in General Safety Requirements No. GSR Part 4 for the identification of structures, systems and components (SSCs) important to safety in nuclear power plants and for their classification on the basis of their function and safety significance. This Safety Guide is intended primarily for use by organizations involved in the design of nuclear power plants, as well as by regulatory bodies and their technical support organizations. The Safety Guide can also be applied to other nuclear installations subject to appropriate adjustments relevant to the specific design of the type of the facility being considered.




IAEA Safety Glossary


Book Description

The IAEA Safety Glossary defines and explains technical terms used in the IAEA Safety Standards and other safety related IAEA publications, and provides information on their usage. The 2018 Edition of the IAEA Safety Glossary is a new edition of the IAEA Safety Glossary, originally issued in 2007. It has been revised and updated to take into account new terminology and usage in safety standards issued between 2007 and 2018. The revisions and updates reflect developments in the technical areas of application of the safety standards and changes in regulatory approaches in Member States.