Synthesis and Reactivity of Transition Metal Complexes Bearing the Tridentate Bis(2-mercapto-p-tolyl)amine ([SNS]H 3) Ligand


Book Description

The work described herein focuses on the synthesis and characterization of new heterobimetallic complexes containing the redox-active W[SNS] 2 metalloligand and investigation into their electronic properties and reactivity. Most recent studies have explored the redox nature of the [SNS]H 3 scaffold through the synthesis and reactivity of a novel set of square-planar nickel complexes.Chapters 2 and 3 describe a modular synthetic approach towards generating a new series of heterobimetallic complexes with the general formula W[SNS]2M(L) ([SNS] = bis(2-mercapto- p-tolyl)amine; M = Ni, Pd, or Pt; and L = dppe, depe, dmpe, dppp, PR'2NRPR'2 (R = phenyl, benzyl; R'=phenyl), DPEphos or dppf). The complexes were prepared by a salt metathesis of Cl2MII(L) with the previously reported W[SNS]2 coordination complex under reducing conditions. X-ray diffraction analysis revealed interesting coordination geometries about the appended Group 10 metal centers moving from Pt and Pd (pseudo-square planar) to the first row Ni (pseudo-tetrahedral) analogue. These complexes demonstrate formal metal--metal bond formation across the series with a tunable first oxidation potential up to 600 mV.Chapter 4 investigates the use of W[SNS]2Ni(dppe) as a catalyst for the electrochemical reduction of protons to hydrogen. This complex was found to catalytically generate hydrogen with an overpotential of 700 mV, a TOF of 14 sec--1, and a Faradaic yield of 80 +/- 3 % using 4-cyanoanilinium tetrafluoroborate in non-aqueous solutions.Chapter 5 demonstrates the effect of exchanging the nickel center of the heterobimetallic complexes discussed in Chapters 2 and 3 with other first row transitions metal ions (i.e. cobalt and copper). Analysis into the observed metal--metal distances reveal stark differences across the series. Additionally, the copper ion containing complexes demonstrate dynamic behavior in solution.Chapter 6 investigates the synthesis and reactivity of a series of monomeric square-planar nickel complexes of the [SNS] scaffold to demonstrate the ligand as redox, proton, and hydrogen atom non-innocent.Appendix A illustrates the electrochemical responses observed for the monoanionic complexes from Chapter 6 in the presence of CO2 and CO. Appendices B and C describe the synthesis and characterization of a five-coordinate cobalt and a heterotrimetallic tungsten-nickel complex, respectively.




Synthesis and Ligand-Enabled Reactivity of Transition Metal Complexes Bearing a Redox-Active Bis(phenoxy)amide Ligand


Book Description

The work described herein focuses on the ability of redox-active ligands to enable multi-electron reactivity at transition metal centers. A parallel theme is the effect of ancillary ligands on controlling and modulating the electronic structure of the redox-active ligand and metal center in addition to ancillary ligand effects as they relate to controlling the primary coordination sphere of the metal. (Abstract shortened by ProQuest.).










Transition Metal Complexes with Multidentate Phosphorous/nitrogen Ligands. Synthesis, Characterization and Reactivity


Book Description

Abstract Transition metal complexes with multidentate phosphorous/nitrogen ligands. Synthesis, characterization and reactivity. By Sergio Santiago Rozenel Doctor in Philosophy in Chemistry University of California, Berkeley Professor John Arnold, Chair Chapter 1: Chromium complexes supported by the multidentate monoanionic ligand [N2P2] {H[N2P2] = tBuN(H)SiMe2N(CH2CH2PiPr2)2} are presented, and the activity of these complexes towards ethylene oligomerization/polymerization is examined. The complexes [N2P2]CrCl2 (1) and [N2P2]CrCl (2) polymerized ethylene after activation with MAO. Derivatives of 1 and 2 were synthesized in order to gain insights about the active species in the ethylene oligomerization/polymerization processes. The alkyl complexes [N2P2]CrMe (3), [N2P2]CrCH2SiMe3 (4) and [N2P2]Cr(Cl)CH2SiMe3 (5), the cationic species {[N2P2]CrCl}BF4 (7), {[N2P2]CrCl}BPh4 (8) and {[N2P2]CrCH2SiMe3}BF4 (9), and the Cr(II) complex [N2P2]CrOSO2CF3 (11) were not active ethylene oligomerization/polymerization catalysts in absence of an activator. Reaction of 1 with two equivalents of MeLi led to reduction to 3. However, with one equivalent of MeLi the stable mixed alkyl-halide derivative [N2P2]Cr(Cl)Me (6) was obtained. Reaction of 2 with Red-Al® produced the hydride ([N2P2]Cr)2(ì-H)2 (10), which reacted with CO to produce the Cr(I) complex [N2P2]Cr(CO)2 (12). Reduction of 2 with KC8 in the presence of p-tolyl azide produced the dimeric cis μ-imido ([N2P2]Cr)2(ì-NC7H7)2 (13). A similar reduction in the presence of ethylene resulted in the isolation of the Cr(III) metallacyclohexane compound [N2P2]CrC4H8 (14). Chapter 2: A series of Co, Ni and Cu complexes with the ligand HN(CH2CH2PiPr2)2 (HPNP) has been isolated and their electrochemical behavior investigated by cyclic voltammetry. The nickel complexes [(HPNP¬)NiOTf]OTf and [(HPNP)NiNCCH3](BF4)2 display reversible reductions, as does the related amide derivative (NP2)NiBr. Related copper(I) and cobalt(II) derivatives were isolated and characterized. Addition of piperidine to [(HNP2)NiNCCH3](BF4)2 led to the formation of the new species [(HPNP)Ni(N(H)C(CH3)NC5H10)](BF4)2. Nucleophilic addition of piperidine to acetonitrile to produce HN=C(CH3)NC5H10 was catalyzed by [(HPNP)NiNCCH3](BF4)2. Chapter 3: A series of bimetallic ruthenium complexes [HPNPRu(N2)]2(μ-Cl)2](BF4)2 (2), [(HPNPRu(H2)Cl)2(μ-Cl)2](BF4)2 (3), [(HPNPRu)2(μ-H2NNH2)(μ-Cl)2](BF4)2 (4), [(HPNPRu)2(μ-Cl)2(μ-HNNPh)](BF4)2 (5), [HPNPRu(NH3)(ç2-N2H4)](BF4)Cl (6), [(HNP2Ru)2(μ-Cl)2(μ2-OSO2CF3)]OSO2CF3 (7), [HPNPRu]2(μ-Cl)3]BPh4 (8) and [HPNPRu]2(μ-Cl)3]BF4 (9) were isolated and characterized in the course of reactions aimed at studying the reduction of N2 and hydrazine. Complex 4 produces ammonia catalytically from hydrazine, and complex 2 generates ammonia upon reaction with Cp2Co/HLuBF4. DFT calculations support the idea that the diazene complex formed is more stable than the expected Chatt-type intermediate. Chapter 4: The reduction chemistry of cobalt complexes with the PNP ligand was explored. Reaction of (HPNP)CoCl2 (1) with n-BuLi generated the deprotonated Co(II) product (PNP)CoCl (2), and the Co(I) reduced species (HPNP)CoCl (3). The reaction of complex 2 with KC8 was investigated, where it was found that the products obtained depended upon the inert gas used to carry out the reaction: (PNP)CoN2 (4) under N2, bimetallic complex [(PNP)Co]2 (5) under Ar, and (HPNP)Co(H)3 (8) under H2. Complex 5 reacted with H2 to generate the bimetallic complex [(PNP)CoH]2 (6). With H2, H3SiPh and AgBPh4 complex 3 generated the species (HPNP)CoCl(H)2 (9), (HPNP)CoCl(H)SiH2Ph (10) and [(HPNP)CoCl]BPh4 (11) respectively. DFT calculations were performed to gain insights about the transformations observed.










Transition Metal Reagents and Catalysts


Book Description

Im Laufe der vergangenen 35 Jahre wurden unzahlige Synthesewege entwickelt, bei denen Ubergangsmetallkomplexe entweder als Reagenzien oder als Katalysatoren fungieren. Dieses Buch bietet besonders denjenigen Synthesechemikern interessante und moderne Einblicke, die bisher noch nicht mit den vielfaltigen Moglichkeiten der Organometallchemie mit Ubergangsmetallen vertraut sind. Zu wichtigen ubergangsmetallkatalysierten Reaktionen werden Anwendungsbeispiele diskutiert. (01/00)







Transition Metals in the Synthesis of Complex Organic Molecules


Book Description

The third edition of Transition Metals in the Synthesis of Complex Organic Molecules is a comprehensive revision and significant expansion of the second edition. The clear and systematic approach to the formation, manipulation, and reactivity of organometallic complexes has been maintained. The book is divided into 10 chapters starting with general formalisms, electron counting, and basic principles of organometallic reaction mechanisms. The organic chemistry of transition metals is then presented by class of metal complex, with many examples of applications in the synthesis of complex natural products and pharmaceuticals. The book is ideal for advanced undergraduate and graduate students as well as all practicing synthetic organic chemists. It is written for organic chemists and offers an easy entry into the field of organotransition metal chemistry without requiring a background in inorganic chemistry.