Wastewater Blending


Book Description




Handbook of Water and Wastewater Treatment Technologies


Book Description

An Overview of Water and Wastewater; What Filtration Is All About; Chemical Additives that Enhance Filtration; Selecting the Right Filter Media; What Pressure- and Cake-Filtration Are All; Cartridge and Other Filters Worth Mentioning; What Sand Filtration is All About; Sedimentation, Clarification, Flotation, and Membrane Separation Technologies; Ion Exchange and Carbon Adsorption; Water Sterilization Technologies; Treating the Sludge; Glossary; Index.







The Industrial Wastewater Systems Handbook


Book Description

From explanations of laws and regulations to hands-on design and operation-the Handbook has it covered!




Wastewater Treatment Plants


Book Description

Step-by-step procedures for planning, design, construction and operation: * Health and environment * Process improvements * Stormwater and combined sewer control and treatment * Effluent disposal and reuse * Biosolids disposal and reuse * On-site treatment and disposal of small flows * Wastewater treatment plants should be designed so that the effluent standards and reuse objectives, and biosolids regulations can be met with reasonable ease and cost. The design should incorporate flexibility for dealing with seasonal changes, as well as long-term changes in wastewater quality and future regulations. Good planning and design, therefore, must be based on five major steps: characterization of the raw wastewater quality and effluent, pre-design studies to develop alternative processes and selection of final process train, detailed design of the selected alternative, contraction, and operation and maintenance of the completed facility. Engineers, scientists, and financial analysts must utilize principles from a wide range of disciplines: engineering, chemistry, microbiology, geology, architecture, and economics to carry out the responsibilities of designing a wastewater treatment plant. The objective of this book is to present the technical and nontechnical issues that are most commonly addressed in the planning and design reports for wastewater treatment facilities prepared by practicing engineers. Topics discussed include facility planning, process description, process selection logic, mass balance calculations, design calculations, and concepts for equipment sizing. Theory, design, operation and maintenance, trouble shooting, equipment selection and specifications are integrated for each treatment process. Thus delineation of such information for use by students and practicing engineers is the main purpose of this book.




Wastewater Reclamation and Reuse


Book Description

The effective integration of water and reclaimed wastewater still requires close examination of public health issues, infrastructure and facilities planning, wastewater treatment plant siting, treatment process reliability, economic and financial analyses, and water utility management. This book assembles, analyzes, and reviews the various aspects of wastewater reclamation, recycling, and reuse in most parts of the world. It considers the effective integration of water and reclaimed wastewater, public health issues, infrastructure and facilities planning, waste-water treatment plant siting, treatment process reliability, economic and financial analysis, and water utility management.




Wastewater Treatment and Reuse Theory and Design Examples, Volume 2:


Book Description

This book will present the theory involved in wastewater treatment processes, define the important design parameters involved, and provide typical values of these parameters for ready reference; and also provide numerical applications and step-by-step calculation procedures in solved examples. These examples and solutions will help enhance the readers’ comprehension and deeper understanding of the basic concepts, and can be applied by plant designers to design various components of the treatment facilities. It will also examine the actual calculation steps in numerical examples, focusing on practical application of theory and principles into process and water treatment facility design.




Fuel Cells in the Waste-to-Energy Chain


Book Description

As the availability of fossils fuels becomes more limited, the negative impact of their consumption becomes an increasingly relevant factor in our choices with regards to primary energy sources. The exponentially increasing demand for energy is reflected in the mass generation of by-products and waste flows which characterize current society’s development and use of fossil sources. The potential for recoverable material and energy in these ever-increasing refuse flows is huge, even after the separation of hazardous constituent elements, allowing safe and sustainable further exploitation of an otherwise 'wasted' resource. Fuel Cells in the Waste-to-Energy Chain explores the concept of waste-to-energy through a 5 step process which reflects the stages during the transformation of refuse flows to a valuable commodity such as clean energy. By providing selected, integrated alternatives to the current centralized, wasteful, fossil-fuel based infrastructure, Fuel Cells in the Waste-to-Energy Chain explores how the concept of waste-to-energy can be constructed and developed into a realistic solution. The entire spectrum of current and future energy problems is illuminated through the explanation of the operational, integration and marketing implications of high efficiency technological solutions using the real context of developed regions such as Europe. Up-to-date reviews are provided on the status of technology and demonstration, implementation and marketing perspectives. The detailed technological information and insight gathered from over twenty years of experience in the field makes Fuel Cells in the Waste-to-Energy Chain a valuable resource for all engineers and researchers in the fields of energy supply systems and waste conversion, as well as providing a key reference for discussions by policy makers, marketing experts and industry developers working in energy supply and waste management.







Fate and Persistence of Pathogens Subjected to Disinfection


Book Description

Disinfection of wastewater is a necessary treatment process for protecting the public from potential exposure to pathogenic microorganisms because many wastewater effluents are discharged into water bodies that may be used for recreation or as future drinking water supplies. Two common forms of disinfection are chlorine and ultraviolet (UV) light. However, microorganisms differ in their susceptibility to UV and chlorine disinfectants. It is necessary to understand how different classes of pathogens respond to UV and chlorine disinfection processes in wastewater to better develop strategies for optimizing the treatment of pathogens in wastewater. It is also recognized that water quality may impact disinfection effectiveness, such as protection of pathogen by particles and disinfectant demand. This study investigated bacteria, viruses and protozoan pathogens. All species of bacteria tested were susceptible to both UV and chlorine, despite differences in antibiotic resistance and tendency to aggregate. Upon exposure to disinfection conditions that could indicate viability of the bacteria tested, but not culturability using common methods, it was found that UV and chlorine were effective in eliminating the capability of viable but non-culturable bacteria to resuscitate and become re-infective. Clostridium spores were resistant to free chlorine and UV disinfection but found to be susceptible to long exposure to monochloramine. Cryptosporidium was resistant to all chlorine forms but very susceptible to UV irradiation. Pathogenic and indicator viruses tested were very susceptible to free chlorine and UV disinfection. UV radiation throughout the 200 to 300 nm range was effective for inactivation of viruses and C. parvum, but wavelengths between 260-270 nm and below 220 nm appeared to be more effective for viruses, suggesting a possible advantage for polychromatic UV sources. Sequential disinfection strategies were proposed and tested to enhance inactivation of various microorganisms. One scenario integrated UV disinfection followed by dynamic chloramination through addition of free chlorine and subsequent transformation to combined chlorine. Further, disinfection of microorganisms in wastewater presents challenges that are inherent to the water matrix, such as pathogens associated with particles. UV and chlorine were both effective for disinfection of coliform in wastewater but chlorine was found to be more effective during long contact times for inactivation of particle associated coliform. In addition to coliform, both Cryptosporidium parvum and Salmonella typhimurium were identified as being particle associated in wastewater using molecular approaches developed to detect microbes in environmental samples