Cars & Parts


Book Description




How to Restore Your Camaro 1967-1969


Book Description

"Covers all major systems & components"--Cover.




The Car Hacker's Handbook


Book Description

Modern cars are more computerized than ever. Infotainment and navigation systems, Wi-Fi, automatic software updates, and other innovations aim to make driving more convenient. But vehicle technologies haven’t kept pace with today’s more hostile security environment, leaving millions vulnerable to attack. The Car Hacker’s Handbook will give you a deeper understanding of the computer systems and embedded software in modern vehicles. It begins by examining vulnerabilities and providing detailed explanations of communications over the CAN bus and between devices and systems. Then, once you have an understanding of a vehicle’s communication network, you’ll learn how to intercept data and perform specific hacks to track vehicles, unlock doors, glitch engines, flood communication, and more. With a focus on low-cost, open source hacking tools such as Metasploit, Wireshark, Kayak, can-utils, and ChipWhisperer, The Car Hacker’s Handbook will show you how to: –Build an accurate threat model for your vehicle –Reverse engineer the CAN bus to fake engine signals –Exploit vulnerabilities in diagnostic and data-logging systems –Hack the ECU and other firmware and embedded systems –Feed exploits through infotainment and vehicle-to-vehicle communication systems –Override factory settings with performance-tuning techniques –Build physical and virtual test benches to try out exploits safely If you’re curious about automotive security and have the urge to hack a two-ton computer, make The Car Hacker’s Handbook your first stop.




Chevrolet Camaro, 1982-1992


Book Description

Haynes disassembles every subject vehicle and documents every step with thorough instructions and clear photos. Haynes repair manuals are used by the pros, but written for the do-it-yourselfer.




Muncie 4-Speed Transmissions


Book Description

The Muncie 4-speeds, M20, M21, and M22 are some of the most popular manual transmissions ever made and continue to be incredibly popular. The Muncie was the top high-performance manual transmission GM offered in its muscle cars of the 60s and early 70s. It was installed in the Camaro, Chevelle, Buick GS, Pontiac GTO, Olds Cutlass, and many other classic cars. Many owners want to retain the original transmission in their classic cars to maintain its value. Transmission expert and veteran author Paul Cangialosi has created an indispensible reference to Muncie 4-speeds that guides you through each crucial stage of the rebuild process. Comprehensive ID information is provided, so you can positively identify the cases, shafts, and related parts. It discusses available models, parts options, and gearbox cases. Most important, it shows how to completely disassemble the gearbox, identify wear and damage, select the best parts, and complete the rebuild. It also explains how to choose the ideal gear ratio for a particular application. Various high-performance and racing setups are also shown, including essential modifications, gun drilling the shafts, cutting down the gears to remove weight, and achieving race-specific clearances. Muncie 4-speeds need rebuilding after many miles of service and extreme use. In addition, when a muscle car owner builds a high-performance engine that far exceeds stock horsepower, a stronger high-performance transmission must be built to accommodate this torque and horsepower increase. No other book goes into this much detail on the identification of the Muncie 4-speed, available parts, selection of gear ratios, and the rebuild process.







Sheet Metal Shaping


Book Description

Whether you want to create custom or replacement parts or build an entire automobile body, this metalworking course for gearheads from best-selling automotive restoration author and professor Ed Barr will take you as far as your interests reach. Barr demystifies this seemingly black art with information on tools and basic skills and 14 customizable projects, fully illustrated with step-by-step color photography. First, you'll learn how to assemble your ideal toolkit, as well as how to build a power hammer and an English wheel. In the process, Barr will help you make informed choices based on available space and budget. Once you're all set up, he addresses the concepts of shape and form. The projects are presented in a way that you can easily apply them to their own vehicles, whatever they may be. Barr also takes the time to show how the projects can be accomplished with different available tools. As you go, you'll gain the skills and confidence for tackling the increasingly complex cases presented. Work your way up to building a fender utilizing the wheeling machine you built earlier; then move on to building a Model T speedster body and an Indy car, and later a challenging ’â??34 Plymouth fender. The book even includes common “goofs” and how to avoid and, if necessary, correct them. Written in an engaging and approachable style, Sheet Metal Shaping serves equally well as a useful supplement to Barr’s previous Professional Sheet Metal Fabrication or as a must-have standalone volume for any fabricator’s library.










Art of the Mustang


Book Description

Loaded with stunning photography of the entire history of the most iconic muscle car ever produced, this collection will blow away any fan.