Acute Exposure Guideline Levels for Selected Airborne Chemicals


Book Description

Extremely hazardous substances can be released accidentally as a result of chemical spills, industrial explosions, fires, or accidents involving railroad cars and trucks transporting EHSs. Workers and residents in communities surrounding industrial facilities where these substances are manufactured, used, or stored and in communities along the nation's railways and highways are potentially at risk of being exposed to airborne EHSs during accidental releases or intentional releases by terrorists. Pursuant to the Superfund Amendments and Reauthorization Act of 1986, the U.S. Environmental Protection Agency (EPA) has identified approximately 400 EHSs on the basis of acute lethality data in rodents. Acute Exposure Guideline Levels for Selected Airborne Chemicals, Volume 19 identifies, reviews, and interprets relevant toxicologic and other scientific data for selected AEGL documents for cyanide salts, diketene, methacrylaldehyde, pentaborane, tellurium hexafluoride, and tetrafluoroethylene in order to develop acute exposure guideline levels (AEGLs) for these high-priority, acutely toxic chemicals. AEGLs represent threshold exposure limits (exposure levels below which adverse health effects are not likely to occur) for the general public and are applicable to emergency exposures ranging from 10 minutes (min) to 8 h. Three levels - AEGL-1, AEGL-2, and AEGL-3 - are developed for each of five exposure periods (10 min, 30 min, 1 h, 4 h, and 8 h) and are distinguished by varying degrees of severity of toxic effects. This report will inform planning, response, and prevention in the community, the workplace, transportation, the military, and the remediation of Superfund sites.




Occupational Ergonomics


Book Description

The approach to the book is analogous to a toolkit. Theuser will open the book and locate the tool that best fits theergonomic assessment task he/she is performing. The chapters of thebook progress from the concept of ergonomics, through the variousassessment techniques, and into the more complex techniques. In addition to discussing the techniques, this book presents themin a form that the readers can readily adapt to their particularsituation. Each chapter, where applicable, presents thetechnique discussed in that chapter and demonstrates how it isused. The supporting material at the end of each chaptercontains exercises, case studies and review questions. Thecase study section of the book presents how to use techniques toanalyze a range of workplace scenarios. Topics include: The Basics of Ergonomics; Anthropometry; OfficeErgonomics; Administrative Controls; Biomechanics; Hand Tools;Vibration; Workstation Design; Manual Material Handling; JobRequirements and Physical Demands Survey; Ergonomic Survey Tools;Work-related Musculoskeletal Disorders; How to Conduct anErgonomics Assessment; and Case Studies




Handbook of Toxicology of Chemical Warfare Agents


Book Description

Handbook of Toxicology of Chemical Warfare Agents, Second Edition covers every aspect of deadly toxic chemicals used in conflicts, warfare and terrorism. Including findings from experimental as well as clinical studies, this essential reference offers in-depth coverage of individual toxicants, target organ toxicity, major incidents, toxic effects in humans, animals and wildlife, biosensors and biomarkers, on-site and laboratory analytical methods, decontamination and detoxification procedures, and countermeasures. Expanding on the ground-breaking first edition, Handbook of Toxicology of Chemical Warfare Agents has been completely updated, presenting the most recent advances in field. Brand new chapters include a case study of the Iran-Iraq war, an overview of chemical weapons of mass destruction, explosives, Ricin, the human respiratory system, alternative testing methods, brain injuries, and more. - Unites world-leading experts to bring you cutting-edge, agent-specific information on Chemical Warfare Agents (CWA) and their adverse effects on human and animal health, and the environment - Provides you with all the information you need on CWA modes of action, detection, prevention, therapeutic treatment and countermeasures - New to this edition: a full update to reflect the most recent advances in the field and new chapters on emergency preparedness, the chemical warfare agents used in Syria, and the use of the Novichok agent in the UK




Physical and Biological Hazards of the Workplace


Book Description

Completely updated version this classic reference covers both physical hazards and biological agents Provides updated information on protecting workers from proven and possible health risks from manual material handling, extremes of temperature and pressure, ionizing and non-ionizing (magnetic fields) radiation, shiftwork, and more Details major changes in our understanding of biological hazards including Ebola, Chikungunya, Zika, HIV, Hepatitis C, Lyme disease, MERS-CoV, TB, and much more All infectious diseases have been updated from an occupational health perspective Includes practical guidance on to how to set up medical surveillance for hazards and suggests preventive measures that can be used to reduce occupational diseases




Air Pollution and Greenhouse Gases


Book Description

This textbook discusses engineering principles relating to air pollution and greenhouse gases (GHGs); it focuses on engineering principles and designs of related devices and equipment for air emission control for a variety of industries such as energy, chemical, and transportation industries. The book aims primarily at senior undergraduate and graduate students in mechanical, chemical and/or environmental engineering departments; it can also be used as a reference book by technical staff and design engineers who are interested in and need to have technical knowledge in air pollution and GHGs. The book is motivated by recent rapid advances in air pollution and greenhouse gas emissions and their control technologies. In addition to classic topics related to air pollution, this book is also featured with emerging topics related to air pollution and GHGs. It covers recent advances in engineering approaches to the reduction of GHG emissions including, but are not limited to, green energy technologies and carbon sequestration and storage. It also introduces an emerging topic in air pollution, which is referred to as Nano Air Pollution. It is a growing concern in air pollution, but largely missing in similar books, likely because of recent rapid advances in nanotechnology has outpaced the advances in nano air pollution control.




Mammalian Toxicology


Book Description

Mammalian Toxicology surveys chemical agents and examines how such chemicals impact on human health, emphasizing the importance in minimizing environmental exposure to chemical and physical hazards in our homes, communities and workplaces through such media as contaminated water, soil and air. Starting with the basic principles on a wide range of toxic agents, this textbook describes how they enter the body, their mechanisms of action once inside, and strategies for diagnosis, prevention and treatment. Topics covered include: General principles of toxicology: pharmacological and toxicological principles underpinning the study of toxicology, risk assessments and mechanisms of cell death Disposition: routes of chemical exposures, entry into the body and various tissues, storage, metabolic biotransformation and elimination, with examples from various toxicants. Toxic agents: the occurrences, disposition in the body, health effects, toxic mechanisms, antidotes and treatments of a range of agents including pesticides, metals, solvents, gases, nanomaterials, food components and additives, pharmaceuticals, drugs of abuse, natural toxins, endocrine disruptors, radiation, and warfare weapons. Toxic effects: including neurotoxicity, developmental toxicity, immunotoxicity, teratogenecity, male and female reproductive toxicity, mutagenecity, carcinogenicity, pulmonary toxicity, cardiovascular toxicity, hepatotoxicity, gastrointestinal toxicity and cardiovascular toxicity Toxicology and society: epidemiological studies of chemical-induced diseases in human populations, and a vision for toxicology in the 21st century. Mammalian Toxicology is an essential primer for students of toxicology, biochemistry, biology, medicine and chemistry. It is also appropriate for professional toxicologists in research or regulatory affairs, and anyone who needs to understand the adverse effects of toxic agents on the human body.




Handbook on the Toxicology of Metals


Book Description

Handbook on the Toxicology of Metals, Fourth Edition bridges the gap between established knowledgebase and new advances in metal toxicology to provide one essential reference for all those involved in the field. This book provides comprehensive coverage of basic toxicological data, emphasizing toxic effects primarily in humans, but also those of animals and biological systems in vitro. The fourth edition also contains several new chapters on important topics such as nanotoxicology, metals in prosthetics and dental implants, gene-environment interaction, neurotoxicology, metals in food, renal, cardiovascular, and diabetes effects of metal exposures and more. Volume I covers “General Considerations and Volume II is devoted to “Specific Metals. A multidisciplinary resource with contributions from internationally-recognized experts, the fourth edition of the Handbook on the Toxicology of Metals is a prominent and indispensable reference for toxicologists, physicians, pharmacologists, engineers, and all those involved in the toxicity of metals. Contains 61 peer reviewed chapters dealing with the effects of metallic elements and their compounds on biological systems Includes information on sources, transport and transformation of metals in the environment and on certain aspects of the ecological effects of metals to provide a basis for better understanding of the potential for adverse effects on human health Covers the toxicology of metallic nanomaterials in a new comprehensive chapter Metal toxicology in developing countries is dealt with in another new chapter emphasizing the adverse effects on human health by the inadequate handling of "ewaste Other new chapters in the 4th edition include: Toxic metals in food; Toxicity of metals released from medical devices; Gene-environment interactions; Neurotoxicology of metals; Cardiovascular disease; Renal effects of exposure to metals; Gold and gold mining; Iridium; Lanthanum; Lithium and Rhodium




Hamilton and Hardy's Industrial Toxicology


Book Description

Providing a concise, yet comprehensive, reference on all aspectsof industrial exposures and toxicants; this book aidstoxicologists, industrial hygienists, and occupational physiciansto investigate workplace health problems. • Updates and expands coverage with new chapterscovering regulatory toxicology, toxicity testing, physical hazards,high production volume (HPV) chemicals, and workplace druguse • Includes information on occupational and environmentalsources of exposure, mammalian toxicology, industrial hygiene,medical management and ecotoxicology • Retains a succinct chapter format that has become thehallmark for the previous editions • Distils a vast amount of information into one resourcefor both academics and professionals




Analysis and Analyzers


Book Description

The Instrument and Automation Engineers’ Handbook (IAEH) is the #1 process automation handbook in the world. Volume two of the Fifth Edition, Analysis and Analyzers, describes the measurement of such analytical properties as composition. Analysis and Analyzers is an invaluable resource that describes the availability, features, capabilities, and selection of analyzers used for determining the quality and compositions of liquid, gas, and solid products in many processing industries. It is the first time that a separate volume is devoted to analyzers in the IAEH. This is because, by converting the handbook into an international one, the coverage of analyzers has almost doubled since the last edition. Analysis and Analyzers: Discusses the advantages and disadvantages of various process analyzer designs Offers application- and method-specific guidance for choosing the best analyzer Provides tables of analyzer capabilities and other practical information at a glance Contains detailed descriptions of domestic and overseas products, their features, capabilities, and suppliers, including suppliers’ web addresses Complete with 82 alphabetized chapters and a thorough index for quick access to specific information, Analysis and Analyzers is a must-have reference for instrument and automation engineers working in the chemical, oil/gas, pharmaceutical, pollution, energy, plastics, paper, wastewater, food, etc. industries. About the eBook The most important new feature of the IAEH, Fifth Edition is its availability as an eBook. The eBook provides the same content as the print edition, with the addition of thousands of web addresses so that readers can reach suppliers or reference books and articles on the hundreds of topics covered in the handbook. This feature includes a complete bidders' list that allows readers to issue their specifications for competitive bids from any or all potential product suppliers.




Biomedical Photonics Handbook, 3 Volume Set


Book Description

This handbook presents the most recent technological advances and applications in the areas of biomedical photonics. This second edition contains introductory material and covers the state-of-the-art methods and instrumentation for biomedical photonic technologies. It integrates interdisciplinary research and development critically needed for scientists, engineers, manufacturers, teachers, students, and clinical providers to learn about the most recent advances and predicted trends in instrumentation and methods as well as clinical applications in important areas of biomedical photonics. Extensive references are provided to enhance further study.