A Practical Guide to Effective Workplace Accident Investigation


Book Description

This book explains how accidents and high potential near-miss incidents are caused, and how to eliminate recurrences by effective accident investigation methods. It shows how to conduct an immediate and root cause analysis so that remedial measures can be taken to prevent a recurrence of similar events. The book shows how to apply the Logical Sequence Accident Investigation Method in the case studies presented. The book: Provides a practical guide to accident causes, investigation and prevention. Explains immediate and root causes in detail. Gives a number of problem-solving methods for the accident investigator to use. Introduces the Logical Sequence Accident Investigation Method. Provides a practical accident investigation evaluation system. The book discusses important topics including hazard identification and risk assessment, workplace health and safety, accident causation and prevention theories, the updated accident domino sequence, as well as safety management system standards and controls. The text is primarily written for professionals and graduate students in the fields of occupational health and safety, ergonomics and human factors engineering.




Pre-Accident Investigations


Book Description

This book is a set of new skills written for the managers that drive safety in their workplace. This is Human Performance theory made simple. If you are starting a new program, revamping an old program, or simply interested in understanding more about safety performance, this guide will be extremely helpful.




Accident and Incident Investigation


Book Description

"............ An easy to understand compilation on Accident & Incident investigation" "............ a complete guide from scratch to Accident Report Writing" "............ one of the best professionally written books on the subject" "............ I can truly say, after starting I did not want to end the Book" The Book is an ultimate guide on conducting training on Accident and Incident Investigation at work sites. It covers procedures relevant inputs for production sites, Oil & Gas Industry, Chemical and Pharmaceutical industries. This book has been prepared in an easy to understand format which can be used as a Training Material too by anyone including QHSE/Safety trainers. Safety hazards are the most common type of hazard and they are present in virtually every workplace at one time or another. These hazards are unsafe conditions in a facility that can cause injury, illness, or even death. Near Miss, Accident and Incident have been explained in detail by way of examples. The method of reporting has also been described in depth. Steps to avoid Near miss and Accidents have been enumerated. The Heinrich Safety triangle model has also been discussed. This book will cover all major aspects of Accident and Incident investigation. The incidents and techniques used for investigation have been dealt in detail including questions to be put to the injured and people available at the investigation scene. How and when to interrogate has been clearly stated in the contents. The six step process of Investigation has been explained in detail including how to proceed with interviews. The description is supported by pictures for better understanding of concepts in a very concise way. The annexure provides Accident Notification, Investigation Report and Recommendation formats for report writing. The author is Institute of Learning and Management, UK certified Trainer and ISO 9001-2015 DNV & Bureau Veritas certified QMS/EMS Lead Auditor having 38 years of experience handling HSE/Safety and Training function in various industries in India and abroad. This book is a tribute to the Construction, Chemical, Petrochemical and Oil & Gas Industry.




Measuring Safety Management Performance


Book Description

Measuring Safety Management Performance lists and explains the difference between lagging and leading measures of safety management performance. It informs the reader how to use both proactive and reactive safety performance indicators and explains that consequence measurement is not an accurate reflection of the organization’s safety effort. It suggests managements’ Safety Performance Indicators (SPI) should be changed to proactive, positive measures of action and activities which can be controlled and accurately measured. A roadmap of a holistic system for measurement is offered that covers health and safety performance. It shows how management is traditionally informed about where they have been by information provided relating to injury data, rather than proactive, measurable, and controllable data on accident prevention efforts provided by the health and safety management system (SMS), which indicate where they are going. This highly practical book features examples of safety performance indicators, provides positive guidelines for accurate safety performance measurement, and is based on actual workplace experiences. It explains the strengths and weaknesses of proactive and reactive measurement metrics and gives examples of leading and lagging safety performance indicators. This book will be an ideal read for professionals and graduate students in the fields of occupational health and safety, ergonomics, and human factors engineering. It will have resonance with managers and professionals engaged in health and safety provisions at their place of work.




Occupational Health and Safety Management


Book Description

Developed to provide safety and health students with an understanding of the how-tos of implementing an occupational safety and health initiative, the first edition of Occupational Health and Safety Management soon became a blueprint for occupational safety and health management for the smallest- to the largest-sized companies. Competently followin




The Cause, Effect, and Control of Accidental Loss


Book Description

The Cause, Effect, and Control of Accidental Loss takes the reader through 15 phases of a typical workplace accident and shows how accidents can be prevented by the introduction of safety management controls in the form of a structured health and safety management system (SMS). It proposes that once the event has been triggered, there is no certainty as to the outcome, so workplaces should rely on proactive safety actions rather than reactive ones. Now fully updated, this new edition expands on the important concepts from the first edition, including hazard identification, risk assessment, flawed safety management systems, the potential for loss, and management control. This title: Challenges the paradigm that the measure of consequence (losses) is a good indicator of safety effort Introduces three luck factors that determine the course of the accident sequence Explains what causes accidents, their consequences, and how to prevent them Showcases accident immediate causes including high-risk (unsafe) acts and high-risk (unsafe) conditions The text is an essential read for professionals, graduate students, and academics in the field of occupational health, safety, and industrial hygiene.







Root Cause Analysis Handbook


Book Description

Are you trying to improve performance, but find that the same problems keep getting in the way? Safety, health, environmental quality, reliability, production, and security are at stake. You need the long-term planning that will keep the same issues from recurring. Root Cause Analysis Handbook: A Guide to Effective Incident Investigation is a powerful tool that gives you a detailed step-by-step process for learning from experience. Reach for this handbook any time you need field-tested advice for investigating, categorizing, reporting and trending, and ultimately eliminating the root causes of incidents. It includes step-by-step instructions, checklists, and forms for performing an analysis and enables users to effectively incorporate the methodology and apply it to a variety of situations. Using the structured techniques in the Root Cause Analysis Handbook, you will: Understand why root causes are important. Identify and define inherent problems. Collect data for problem-solving. Analyze data for root causes. Generate practical recommendations. The third edition of this global classic is the most comprehensive, all-in-one package of book, downloadable resources, color-coded RCA map, and licensed access to online resources currently available for Root Cause Analysis (RCA). Called by users "the best resource on the subject" and "in a league of its own." Based on globally successful, proprietary methodology developed by ABS Consulting, an international firm with 50 years' experience in 35 countries. Root Cause Analysis Handbook is widely used in corporate training programs and college courses all over the world. If you are responsible for quality, reliability, safety, and/or risk management, you'll want this comprehensive and practical resource at your fingertips. The book has also been selected by the American Society for Quality (ASQ) and the Risk and Insurance Society (RIMS) as a "must have" for their members.




Managing Maintenance Error


Book Description

Situations and systems are easier to change than the human condition - particularly when people are well-trained and well-motivated, as they usually are in maintenance organisations. This is a down-to-earth practitioner’s guide to managing maintenance error, written in Dr. Reason’s highly readable style. It deals with human risks generally and the special human performance problems arising in maintenance, as well as providing an engineer’s guide for their understanding and the solution. After reviewing the types of error and violation and the conditions that provoke them, the author sets out the broader picture, illustrated by examples of three system failures. Central to the book is a comprehensive review of error management, followed by chapters on:- managing person, the task and the team; - the workplace and the organization; - creating a safe culture; It is then rounded off and brought together, in such a way as to be readily applicable for those who can make it work, to achieve a greater and more consistent level of safety in maintenance activities. The readership will include maintenance engineering staff and safety officers and all those in responsible roles in critical and systems-reliant environments, including transportation, nuclear and conventional power, extractive and other chemical processing and manufacturing industries and medicine.




From Accidents to Zero


Book Description

As leaders increasingly understand the importance of good safety practice to support their business objectives, safety and health practitioners develop better tools and solutions. However, there is still a gulf between these two groups where engagement, communication and shared understanding can be found lacking. From Accidents to Zero opens up the field of safety culture and breaks it down into bite-sized pieces to facilitate new, critical thought and inspire practical action. Based on the concept of creating safety, as opposed to just preventing accidents, each of the 26 chapters in this user-friendly book includes explanation, commentary, reflections and practical activities designed to systematically and sustainably improve workplace safety culture. Core topics range from behaviour to values, daily rituals to unsafe acts, felt leadership to trust. Andrew Sharman's practical guide blends current academic thinking with authoritative guidance and sets up the opportunity for all parts of the organization to close the gap by providing very clear steps to thinking and acting differently. It sparks insight into how both traditional methods and novel approaches can be brought to life in real world situations. From Accidents to Zero offers a clear route to culture change through over one hundred pragmatic ideas to motivate and lead people, influence behaviour and drive a positive evolution in workplace safety.