Building Access


Book Description

“All too often,” wrote disabled architect Ronald Mace, “designers don’t take the needs of disabled and elderly people into account.” Building Access investigates twentieth-century strategies for designing the world with disability in mind. Commonly understood in terms of curb cuts, automatic doors, Braille signs, and flexible kitchens, Universal Design purported to create a built environment for everyone, not only the average citizen. But who counts as “everyone,” Aimi Hamraie asks, and how can designers know? Blending technoscience studies and design history with critical disability, race, and feminist theories, Building Access interrogates the historical, cultural, and theoretical contexts for these questions, offering a groundbreaking critical history of Universal Design. Hamraie reveals that the twentieth-century shift from “design for the average” to “design for all” took place through liberal political, economic, and scientific structures concerned with defining the disabled user and designing in its name. Tracing the co-evolution of accessible design for disabled veterans, a radical disability maker movement, disability rights law, and strategies for diversifying the architecture profession, Hamraie shows that Universal Design was not just an approach to creating new products or spaces, but also a sustained, understated activist movement challenging dominant understandings of disability in architecture, medicine, and society. Illustrated with a wealth of rare archival materials, Building Access brings together scientific, social, and political histories in what is not only the pioneering critical account of Universal Design but also a deep engagement with the politics of knowing, making, and belonging in twentieth-century United States.







2010 ADA Standards for Accessible Design


Book Description

(a) Design and construction. (1) Each facility or part of a facility constructed by, on behalf of, or for the use of a public entity shall be designed and constructed in such manner that the facility or part of the facility is readily accessible to and usable by individuals with disabilities, if the construction was commenced after January 26, 1992. (2) Exception for structural impracticability. (i) Full compliance with the requirements of this section is not required where a public entity can demonstrate that it is structurally impracticable to meet the requirements. Full compliance will be considered structurally impracticable only in those rare circumstances when the unique characteristics of terrain prevent the incorporation of accessibility features. (ii) If full compliance with this section would be structurally impracticable, compliance with this section is required to the extent that it is not structurally impracticable. In that case, any portion of the facility that can be made accessible shall be made accessible to the extent that it is not structurally impracticable. (iii) If providing accessibility in conformance with this section to individuals with certain disabilities (e.g., those who use wheelchairs) would be structurally impracticable, accessibility shall nonetheless be ensured to persons with other types of disabilities, (e.g., those who use crutches or who have sight, hearing, or mental impairments) in accordance with this section.




Designing for the Disabled: The New Paradigm


Book Description

Selwyn Goldsmith's Designing for the Disabled has, since it was first published in 1963, been a bible for practising architects around the world. Now, as a new book with a radical new vision, comes his Designing for the Disabled: The New Paradigm. Goldsmith's new paradigm is based on the concept of architectural disability. As a version of the social model of disability, it is not exclusively the property of physically disabled people. Others who are afflicted by it include women, since men customarily get proportionately four times as many amenities in public toilets as women - and women have to queue where men do not - and those with infants in pushchairs, because normal WC facilities are invariably too small to get a pushchair and infant into. To counter architectural disability, Goldsmith's line is that the axiom for legislation action has to be 'access for everyone' - it should not just be 'access for the disabled', as it presently is with the Part M building regulation and relevant provisions of the 1995 Disability Discrimination Act. In a 40-page annex to his book he sets out the terms that a new-style Part M regulation and its Approved Document might take, one that would cover alterations to existing buildings as well as new buildings. But architects and building control officers need not, he says, wait for new a legislation to apply new practical procedures to meet the requirements of the current Part M regulation; they can, as he advises, act positively now. This is a book which will oblige architects to rethink the methodology of designing for the disabled. It is a book that no practising architect, building control officer, local planning officer or access officer can afford to be without.




Applying the ADA


Book Description

A guide to real-world applications of The 2010 Americans with Disabilities Act Standards for Accessible Design Applying the ADA helps architects and developers understand better how the rules for eliminating barriers in the built environment apply to everyday life and how to best implement them in the design and construction of a broad variety of buildings and facilities. By showing how The 2010 Americans with Disabilities Act Standards for Accessible Design have been applied in various contexts and building types, this extensively illustrated guide helps readers quickly understand the requirements of the standards and how to apply them to both new construction and renovation. Written by an architect who consults regularly on accessibility issues for design professionals, building owners, and facility managers, this user-friendly guide features 100 photos and 150 drawings that take the guesswork out of applying the standards to real-world projects. Building types covered include: Healthcare and senior living facilities and hospitals College and university facilities Elementary and high schools Hotels and other transient lodging facilities Amusement parks and play areas Historic preservation and remodels Retail and office spaces Applying the ADA is an indispensable resource for architects, interior designers, owners, developers, and facility managers. It is also important reading for students of architecture and interior design.




Fair Housing Act Design Manual


Book Description

The Fair Housing Act Design Manual: A Manual to Assist Designers and Builders in Meeting the Accessibility Requirements of The Fair Housing Act provides clear and helpful guidance about ways to design and construct housing which complies with the Fair Housing Act. The manual provides direct information about the accessibility requirements of the Act, which must be incorporated into the design, and construction of multifamily housing covered by the Act. It carries out two statutory responsibilities: (1) to provide clear statement of HUD's interpretation of the accessibility requirements of the Act so that readers may know what actions on their part will provide them with a "safe harbor"; and (2) to provide guidance in the form of recommendations which, although not binding meet the Department's obligation to provide technical assistance on alternative accessibility approaches which will comply with the Act, but may exceed its minimal requirements. The latter information allows housing providers to choose among alternative and also provides persons with disabilities with information on accessible design approaches. The Manual clarifies what are requirements under the Act and what are HUD's technical assistance recommendations. The portions describing the requirements are clearly differentiated from the technical assistance recommendations.




Design for Accessibility


Book Description

This resource is designed to help you not only comply with Section 504 and the Americans with Disabilities Act, but to assist you in making access an integral part of your organization's planning, mission, programs, outreach, meetings, budget and staffing.




Inclusive Design for a Digital World


Book Description

What is inclusive design? It is simple. It means that your product has been created with the intention of being accessible to as many different users as possible. For a long time, the concept of accessibility has been limited in terms of only defining physical spaces. However, change is afoot: personal technology now plays a part in the everyday lives of most of us, and thus it is a responsibility for designers of apps, web pages, and more public-facing tech products to make them accessible to all. Our digital era brings progressive ideas and paradigm shifts – but they are only truly progressive if everybody can participate. In Inclusive Design for a Digital World, multiple crucial aspects of technological accessibility are confronted, followed by step-by-step solutions from User Experience Design professor and author Regine Gilbert. Think about every potential user who could be using your product. Could they be visually impaired? Have limited motor skills? Be deaf or hard of hearing? This book addresses a plethora of web accessibility issues that people with disabilities face. Your app might be blocking out an entire sector of the population without you ever intending or realizing it. For example, is your instructional text full of animated words and Emoji icons? This makes it difficult for a user with vision impairment to use an assistive reading device, such as a speech synthesizer, along with your app correctly. In Inclusive Design for a Digital World, Gilbert covers the Web Content Accessibility Guidelines (WCAG) 2.1 requirements, emerging technologies such as VR and AR, best practices for web development, and more. As a creator in the modern digital era, your aim should be to make products that are inclusive of all people. Technology has, overall, increased connection and information equality around the world. To continue its impact, access and usability of such technology must be made a priority, and there is no better place to get started than Inclusive Design for a Digital World. What You’ll LearnThe moral, ethical, and high level legal reasons for accessible design Tools and best practices for user research and web developers The different types of designs for disabilities on various platforms Familiarize yourself with web compliance guidelines Test products and usability best practicesUnderstand past innovations and future opportunities for continued improvementWho This Book Is For Practitioners of product design, product development, content, and design can benefit from this book.




Universal Design in Higher Education


Book Description

Universal Design in Higher Education looks at the design of physical and technological environments at institutions of higher education; at issues pertaining to curriculum and instruction; and at the full array of student services. Universal Design in Higher Education is a comprehensive guide for researchers and practitioners on creating fully accessible college and university programs. It is founded upon, and contributes to, theories of universal design in education that have been gaining increasingly wide attention in recent years. As greater numbers of students with disabilities attend postsecondary educational institutions, administrators have expressed increased interest in making their programs accessible to all students. This book provides both theoretical and practical guidance for schools as they work to turn this admirable goal into a reality. It addresses a comprehensive range of topics on universal design for higher education institutions, thus making a crucial contribution to the growing body of literature on special education and universal design. This book will be of unique value to university and college administrators, and to special education researchers, practitioners, and activists.




Designing Buildings for People


Book Description

Our built environments can affect us in many subtle ways. Simply sensing fresh air and natural light or seeing greenery and open space can uplift our mood and improve our wellbeing. But these healthy environments are increasingly difficult to achieve in practice. The vital collaboration between the many people involved in designing and producing buildings is often not achieved. Then there is the pressing need to reduce waste and pollution. Managing these demands is a challenge, especially in a traditional climate of short-term thinking. Designing Buildings for People explores how we can learn from buildings of the past, vernacular architecture and the natural world around us, while still harnessing the opportunities presented by technology, to think creatively, work collaboratively and exercise a transdisciplinary approach. The book features over 200 images, exhibiting the acclaimed work of internationally recognized and research-led designers from the fields of architecture, engineering and management. It is a prime reference work for professionals and students who want to build the sustainable buildings of the future.