Book Description

Excerpt from American Engineer and Railroad Journal, Vol. 74: January, 1900 The new work in progress includes an installment of heavy simple engines, and an installment of four-cylinder compounds, the two classes being quite similar except as to cylinder ar rangement and the details depending thereon. These locomotives in common with the new engines of the Lancashire and Yorkshire, to which I referred in a previous letter, have a center frame which in its present form at least, constitutes a new element in locomotive design. The center frame is a deep cast-steel member, extending longitudinally from the cylinders to a cross-brace back of the main axle. Its purpose is to provide support for a third bearing on the crank-axles, for which the straight portion between the cranks serves as the journal. With the addition of this hearing, the full length of the crank axle, except that portion which is taken by the wheels and the webs of the cranks, is utilized as journal surface, a condition made possible by the use of the Joy valve-gear and the consequent absence of eccentrics. The center-bearing is not allowed to carry any considerable portion of the weight of the engine, but is designed chiefly to resist the thrust of the cranks. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.