An Introduction to Levee Construction for Professional Engineers


Book Description

Introductory technical guidance for civil engineers and construction managers interested in levee construction. Here is what is discussed: 1. LEVEE CONSTRUCTION METHODS, 2. FOUNDATION PREPARATION AND TREATMENT, 3. METHODS OF IMPROVING STABILITY, 4. EMBANKMENT CONSTRUCTION CONTROL, 5. EMBANKMENT ZONING, 6. PROTECTION OF RIVERSIDE SLOPES, 7. PIPELINES AND OTHER UTILITY LINES CROSSING LEVEES.




An Introduction to Levees for Professional Engineers


Book Description

Introductory technical guidance for civil engineers and other professional engineers and construction managers interested in design and construction of levees. Here is what is discussed: 1. FIELD INVESTIGATIONS, 2. LEVEE CONSTRUCTION METHODS, 3. SEEPAGE, SLOPE AND SETTLEMENT, 4. BERMS, FILTERS AND DRAINS, 5. SOIL CEMENT FOR PROTECTION OF LEVEES, 6. SPECIAL FEATURES.




An Introduction to Seepage, Slope and Settlement of Levees for Professional Engineers


Book Description

Introductory technical guidance for civil engineers and other professional engineers and construction managers interested in design and construction of levees. Here is what is discussed: 1. FOUNDATION UNDERSEEPAGE, 2. SEEPAGE THROUGH EMBANKMENTS, 3. EMBANKMENT STABILITY, 4. METHODS OF ANALYSIS, 5. CONDITIONS REQUIRING ANALYSIS, 6. MINIMUM ACCEPTABLE FACTORS OF SAFETY, 7. MEASURES TO INCREASE STABILITY, 8. SURFACE SLIDES, 9. SETTLEMENT, 10. SETTLEMENT ANALYSIS.




An Introduction to Field Investigations and Testing for Levees for Professional Engineers


Book Description

Introductory technical guidance for civil engineers and other professional engineers and construction managers interested in planning, design and construction of levees for flood protection and water resources development projects. Here is what is discussed: 1. INTRODUCTION, 2. FIELD INVESTIGATIONS, 3. SUBSURFACE EXPLORATION, 4. FIELD TESTING, 5. LABORATORY TESTING.




An Introduction to Levee Construction


Book Description

Introductory technical guidance for civil engineers and other professional engineers and construction managers interested in construction of levees. Here is what is discussed: 1. LEVEE CONSTRUCTION METHODS 2. FOUNDATION PREPARATION AND TREATMENT 3. METHODS OF IMPROVING STABILITY 4. EMBANKMENT CONSTRUCTION CONTROL 5. EMBANKMENT ZONING 6. PROTECTION OF RIVERSIDE SLOPES 7. PIPELINES AND OTHER UTILITY LINES CROSSING LEVEES.




Design and Construction of Levees


Book Description

The purpose of this manual is to present basic principles used in the design and construction of earth levees. The term levee as used herein is defined as an embankment whose primary purpose is to furnish flood protection from seasonal high water and which is therefore subject to water loading for periods of only a few days or weeks a year. Embankments that are subject to water loading for prolonged periods (longer than normal flood protection requirements) or permanently should be designed in accordance with earth dam criteria rather than the levee criteria given herein. Even though levees are similar to small earth dams they differ from earth dams in the following important respects: (a) a levee embankment may become saturated for only a short period of time beyond the limit of capillary saturation, (b) levee alignment is dictated primarily by flood protection requirements, which often results in construction on poor foundations, and (c) borrow is generally obtained from shallow pits or from channels excavated adjacent to the levee, which produce fill material that is often heterogeneous and far from ideal. Selection of the levee section is often based on the properties of the poorest material that must be used.




An Introduction to Special Features of Levees for Professional Engineers


Book Description

Introductory technical guidance for civil engineers and other professional engineers and construction managers interested in levee design and construction. Here is what is discussed: 1. PIPELINES AND OTHER UTILITY LINES CROSSING LEVEES, 2. GENERAL CONSIDERATIONS FOR PIPELINES CROSSING THROUGH OR UNDER LEVEES, 3. GENERAL CONSIDERATIONS FOR PIPELINES CROSSING OVER LEVEES, 4. PIPE SELECTION, 5. ANTISEEPAGE DEVICES, 6. CLOSURE DEVICES, 7. CAMBER, 8. INSTALLATION REQUIREMENTS, 9. ACCESS ROADS, 10. RAMPS, 11. LEVEE ENLARGEMENTS, 12. JUNCTION WITH CONCRETE CLOSURE STRUCTURES, 13. OTHER SPECIAL FEATURE.




An Introduction to Levee Construction


Book Description

This publication provides introductory technical guidance for civil engineers and other professional engineers and architects interested in construction of levees. Here is what is discussed: 1. LEVEE CONSTRUCTION METHODS, 2. FOUNDATION PREPARATION AND TREATMENT, 3. METHODS OF IMPROVING STABILITY, 4. EMBANKMENT CONSTRUCTION CONTROL, 5. EMBANKMENT ZONING, 6. PROTECTION OF RIVERSIDE SLOPES, 7. PIPELINES AND OTHER UTILITY LINES CROSSING LEVEES




An Introduction to Reinforced Concrete Pipe for Professional Engineers


Book Description

Introductory technical guidance for civil engineers and other professional engineers and construction managers interested in reinforced concrete pipes. Here is what is discussed: 1. GENERAL, 2. INSTALLATION: SMALL DAMS, 3. MATERIALS: SMALL DAMS, 4. MATERIALS: LEVEES, 5. INSTALLATION: LEVEES, 6. LOADINGS, 7. METHODS OF ANALYSIS, 8. JOINTS, 9. CAMBER.




An Introduction to Landscaping of Levees for Professional Engineers


Book Description

Introductory technical guidance for civil engineers, geotechnical engineers and other professional engineers and construction managers interested in design, construction and maintenance of levees. Here is what is discussed: 1. INTRODUCTION 2. LANDSCAPE PLANTING: OBJECTIVES AND ENGINEERING REQUIREMENTS, 3. TREATMENT OF LEVEES, FLOODWALLS, EMBANKMENT DAMS, AND APPURTENANT STRUCTURES, 4. DESIGN CONSIDERATIONS, 5. VEGETATION-RELATED MAINTENANCE AND REPAIR, 6. FIGURES.