Author : Hai-Sui Yu
Publisher : Springer Science & Business Media
Page : 541 pages
File Size : 44,15 MB
Release : 2007-01-11
Category : Science
ISBN : 0387335994
Plasticity and Geotechnics is the first attempt to summarize and present in a single volume the major achievements in the field of plasticity theory for geotechnical materials and its applications to geotechnical analysis and design. The book emerges from the author’s belief that there is an urgent need for the geotechnical and solid mechanics community to have a unified presentation of plasticity theory and its application to geotechnical engineering.
Author : William Daniel Liam Finn
Publisher :
Page : 118 pages
File Size : 40,73 MB
Release : 1965
Category : Plasticity
ISBN :
Author : Wai-Fah Chen
Publisher : Elsevier
Page : 653 pages
File Size : 48,68 MB
Release : 2013-07-10
Category : Science
ISBN : 0444601066
Developments in Geotechnical Engineering, Volume 7: Limit Analysis and Soil Plasticity covers the theory and applications of limit analysis as applied to soil mechanics. Organized into 12 chapters, the book presents an introduction to the modern development of theory of soil plasticity and includes rock-like material. The first four chapters of the book describe the technique of limit analysis, beginning with the historical review of the subject and the assumptions on which it is based, and then covering various aspects of available techniques of limit analysis. The subsequent chapters deal with the applications of limit analysis to what may be termed "classical soil mechanics problems that include bearing capacity of footings, lateral earth pressure problems, and stability of slopes. In many cases, comparisons of limit analysis solution and conventional limit equilibrium and slip-like solutions are also presented. Other chapters deal with the advances in bearing-capacity problem of concrete blocks or rock and present theoretical and experimental results of various concrete bearing problems. The concluding chapter examines elastic-plastic soil and elastic-plastic-fracture models for concrete materials. This book is an ideal resource text to geotechnical engineers and soil mechanics researchers.
Author : Eduardo A. de Souza Neto
Publisher : John Wiley & Sons
Page : 718 pages
File Size : 31,60 MB
Release : 2011-09-21
Category : Science
ISBN : 1119964547
The subject of computational plasticity encapsulates the numerical methods used for the finite element simulation of the behaviour of a wide range of engineering materials considered to be plastic – i.e. those that undergo a permanent change of shape in response to an applied force. Computational Methods for Plasticity: Theory and Applications describes the theory of the associated numerical methods for the simulation of a wide range of plastic engineering materials; from the simplest infinitesimal plasticity theory to more complex damage mechanics and finite strain crystal plasticity models. It is split into three parts - basic concepts, small strains and large strains. Beginning with elementary theory and progressing to advanced, complex theory and computer implementation, it is suitable for use at both introductory and advanced levels. The book: Offers a self-contained text that allows the reader to learn computational plasticity theory and its implementation from one volume. Includes many numerical examples that illustrate the application of the methodologies described. Provides introductory material on related disciplines and procedures such as tensor analysis, continuum mechanics and finite elements for non-linear solid mechanics. Is accompanied by purpose-developed finite element software that illustrates many of the techniques discussed in the text, downloadable from the book’s companion website. This comprehensive text will appeal to postgraduate and graduate students of civil, mechanical, aerospace and materials engineering as well as applied mathematics and courses with computational mechanics components. It will also be of interest to research engineers, scientists and software developers working in the field of computational solid mechanics.
Author : W.F. Chen
Publisher : Elsevier
Page : 244 pages
File Size : 17,69 MB
Release : 1985-11-01
Category : Science
ISBN : 0444598367
This book is addressed primarily to civil engineers familiar with such traditional topics as strength of materials, soil mechanics, and theory of elasticity and structures, but less familiar with the modern development of the mathematical theory of soil plasticity necessary to any engineer working under the general heading of nonlinear analysis of soil-structure system. This book will satisfy his needs in the case of the soil medium.It introduces the reader to the theory of soil plasticity and its numerical implementation into computer programs. The theory and method of computer implementation presented here are appropriate for solving nonlinear static dynamic problems in soil mechanics and are applicable for finite difference and finite element computer codes. A sample computer model subroutine is developed and this is used to study some typical soil mechanics problems.With its comprehensive coverage and simple, concise presentation, the book will undoubtedly prove to be very useful for consulting engineers, research and graduate students in geotechnical engineering.
Author : J. Hult
Publisher : Springer
Page : 0 pages
File Size : 41,11 MB
Release : 2011-12-23
Category : Science
ISBN : 9783642815843
The Symposium was initiated in 1977 by Dr. M. G. CHABERT, Directeur des plans et programmes du C. E. T. I. M. His death, which occurred a few weeks before the Symposium, was deeply felt by all participants, who decided to dedicate this volume to his memory. The purpose, as set out by Dr. CHABERT, was to bring together people speaking the language of research and the language of industry in discussing problems of structural analysis. The Centre Technique des Industries M~caniques (C. E. T. I. M. ) at Sen1is was considered a suitable place for organizing such a meeting. Modern structural analysis, aided by high speed computers, is mainly concerned with non-linear phenomena, such as plasticity, visco-plasticity, damage and fracture mecha nics. Scientists involved in research in this field also speak two different languages: that of material analysts and that of structural analysts. The Bureau of IUTAM had appointed the following Scientific Committee to implement the ideas proposed by Dr. CHABERT: J. LEMAITRE, Universite Paris VI, ENSET, Cachan, France Chairman J. HULT, Chalmers University of Technology, Gothenburg, Sweden, Co-Chairman G. CHABERT, Centre Technique des Industries M~caniques, Sen1is, France F. A. LECKIE, University of Illinois, Urbana, Illinois, USA G. MAIER, Istituto di Scienza e Technica delle Costruzi oni, Po1otechnico di Milano, Italy Z. MROZ, Polish Academy of Sciences, Warsaw, Poland G. S.
Author : Jagabanduhu Chakrabarty
Publisher : Elsevier
Page : 895 pages
File Size : 40,78 MB
Release : 2012-12-02
Category : Technology & Engineering
ISBN : 0080481361
Plasticity is concerned with the mechanics of materials deformed beyond their elastic limit. A strong knowledge of plasticity is essential for engineers dealing with a wide range of engineering problems, such as those encountered in the forming of metals, the design of pressure vessels, the mechanics of impact, civil and structural engineering, as well as the understanding of fatigue and the economical design of structures. Theory of Plasticity is the most comprehensive reference on the subject as well as the most up to date -- no other significant Plasticity reference has been published recently, making this of great interest to academics and professionals. This new edition presents extensive new material on the use of computational methods, plus coverage of important developments in cyclic plasticity and soil plasticity. - A complete plasticity reference for graduate students, researchers and practicing engineers; no other book offers such an up to date or comprehensive reference on this key continuum mechanics subject - Updates with new material on computational analysis and applications, new end of chapter exercises - Plasticity is a key subject in all mechanical engineering disciplines, as well as in manufacturing engineering and civil engineering. Chakrabarty is one of the subject's leading figures.
Author : H.J. Herrmann
Publisher : Springer Science & Business Media
Page : 742 pages
File Size : 14,3 MB
Release : 2013-06-29
Category : Science
ISBN : 9401726531
Dry granular materials, such as sand, sugar and powders, can be poured into a container like a liquid and can also form a pile, resisting gravity like a solid, which is why they can be regarded as a fourth state of matter, neither solid nor liquid. This book focuses on defining the physics of dry granular media in a systematic way, providing a collection of articles written by recognised experts. The physics of this field is new and full of challenges, but many questions (such as kinetic theories, plasticity, continuum and discrete modelling) also require the strong participation of mechanical and chemical engineers, soil mechanists, geologists and astrophysicists. The book gathers into a single volume the relevant concepts from all these disciplines, enabling the reader to gain a rapid understanding of the foundations, as well as the open questions, of the physics of granular materials. The contributors have been chosen particularly for their ability to explain new concepts, making the book attractive to students or researchers contemplating a foray into the field. The breadth of the treatment, on the other hand, makes the book a useful reference for scientists who are already experienced in the subject.
Author : Jean Salençon
Publisher : John Wiley & Sons
Page : 184 pages
File Size : 41,33 MB
Release : 1977
Category : Technology & Engineering
ISBN :
Author : Sam Helwany
Publisher : John Wiley & Sons
Page : 402 pages
File Size : 46,6 MB
Release : 2007-03-16
Category : Technology & Engineering
ISBN : 0471791075
A simplified approach to applying the Finite Element Method to geotechnical problems Predicting soil behavior by constitutive equations that are based on experimental findings and embodied in numerical methods, such as the finite element method, is a significant aspect of soil mechanics. Engineers are able to solve a wide range of geotechnical engineering problems, especially inherently complex ones that resist traditional analysis. Applied Soil Mechanics with ABAQUS® Applications provides civil engineering students and practitioners with a simple, basic introduction to applying the finite element method to soil mechanics problems. Accessible to someone with little background in soil mechanics and finite element analysis, Applied Soil Mechanics with ABAQUS® Applications explains the basic concepts of soil mechanics and then prepares the reader for solving geotechnical engineering problems using both traditional engineering solutions and the more versatile, finite element solutions. Topics covered include: Properties of Soil Elasticity and Plasticity Stresses in Soil Consolidation Shear Strength of Soil Shallow Foundations Lateral Earth Pressure and Retaining Walls Piles and Pile Groups Seepage Taking a unique approach, the author describes the general soil mechanics for each topic, shows traditional applications of these principles with longhand solutions, and then presents finite element solutions for the same applications, comparing both. The book is prepared with ABAQUS® software applications to enable a range of readers to experiment firsthand with the principles described in the book (the software application files are available under "student resources" at www.wiley.com/college/helwany). By presenting both the traditional solutions alongside the FEM solutions, Applied Soil Mechanics with ABAQUS® Applications is an ideal introduction to traditional soil mechanics and a guide to alternative solutions and emergent methods. Dr. Helwany also has an online course based on the book available at www.geomilwaukee.com.
