Compressor Surge and Rotating Stall


Book Description

The series Advances in Industrial Control aims to report and encourage technology transfer in control engineering. The rapid development of control technology impacts all areas of the control discipline. New theory, new controllers, actuators, sensors, new industrial processes, computer methods, new applications, new philosophies . . . , new challenges. Much of this development work resides in industrial reports, feasibility study papers and the reports of advanced collaborative projects. The series offers an opportunity for researchers to present an extended exposition of such new work in all aspects of industrial control for wider and rapid dissemination. Operating plant as close as possible to constraint boundaries so often brings economic benefits in industrial process control. This is the conundrum at the heart of this monograph by Tommy Gravdahl and Olav Egeland on stall control for compressors. Operation of the compressor closer to the surge line can increase operational efficiency and flexibility The approach taken by the authors follows the modern control system paradigm: -physical understanding, detailed modelling and simulation studies and finally control studies. The thoroughness of the presentation, bibliography and appendices indicates that the volume has all the hallmarks of being a classic for its subject. Despite the monograph's narrow technical content, the techniques and insights presented should appeal to the wider industrial control community as well as the gas turbine/compressor specialist. M. J. Grimble and M. A.




Bifurcation Control


Book Description

Bifurcation control refers to the task of designing a controller that can modify the bifurcation properties of a given nonlinear system, so as to achieve some desirable dynamical behaviors. There exists no similar control theory-oriented book available in the market that is devoted to the subject of bifurcation control, written by control engineers for control engineers. World-renowned leading experts in the field provide their state-of-the-art survey about the extensive research that has been done over the last few years in this subject. The book is not only aimed at active researchers in the field of bifurcation control and its applications, but also at a general audience in related fields.




Practical Bifurcation and Stability Analysis


Book Description

Probably the first book to describe computational methods for numerically computing steady state and Hopf bifurcations. Requiring only a basic knowledge of calculus, and using detailed examples, problems, and figures, this is an ideal textbook for graduate students.




Air Breathing Engines and Aerospace Propulsion


Book Description

Contributed papers presented at the 7th National Conference on Air Breathing Engines and Aerospace Propulsion, hosted at I.I.T., Kanpur.




Nonlinear Control Systems Design 1992


Book Description

This volume represents most aspects of the rich and growing field of nonlinear control. These proceedings contain 78 papers, including six plenary lectures, striking a balance between theory and applications. Subjects covered include feedback stabilization, nonlinear and adaptive control of electromechanical systems, nonholonomic systems. Generalized state space systems, algebraic computing in nonlinear systems theory, decoupling, linearization and model-matching and robust control are also covered.




Dynamic Modeling, Simulation and Control of Energy Generation


Book Description

This book addresses the core issues involved in the dynamic modeling, simulation and control of a selection of energy systems such as gas turbines, wind turbines, fuel cells and batteries. The principles of modeling and control could be applied to other non-convention methods of energy generation such as solar energy and wave energy. A central feature of Dynamic Modeling, Simulation and Control of Energy Generation is that it brings together diverse topics in thermodynamics, fluid mechanics, heat transfer, electro-chemistry, electrical networks and electrical machines and focuses on their applications in the field of energy generation, its control and regulation. This book will help the reader understand the methods of modelling energy systems for controller design application as well as gain a basic understanding of the processes involved in the design of control systems and regulators. It will also be a useful guide to simulation of the dynamics of energy systems and for implementing monitoring systems based on the estimation of internal system variables from measurements of observable system variables. Dynamic Modeling, Simulation and Control of Energy Generation will serve as a useful aid to designers of hybrid power generating systems involving advanced technology systems such as floating or offshore wind turbines and fuel cells. The book introduces case studies of the practical control laws for a variety of energy generation systems based on nonlinear dynamic models without relying on linearization. Also the book introduces the reader to the use nonlinear model based estimation techniques and their application to energy systems.







Instabilities and Turbulence in Engineering Flows


Book Description

This book contains contributions by colleagues, former students and friends of Professor Eli Reshotko in celebration of his 60th birth day. Since Professor Reshotko's scientific and engineering contribu tions have been in the areas of hydrodynamic stability, transition to turbulence, and boundary layer flows, it is only appropriate that the articles in this volume be devoted to these and related topics. The first two sections focus on instabilities and transition in sub sonic and supersonic flows, respectively. The third section deals with developing turbulence, while the the final section treats related prob lems in engineering fluid mechanics. The diversity and scope of the articles contained herein exemplify the insight and expertise required in the study of transitional and turbulent flows today - traits which also exemplify Eli Reshotko's contributions to these fields. A few of the articles in this volume were presented at a sym posium in honor of Eli Reshotko's 60th birthday, held in Newport News, Virginia, on July 28, 1991. The symposium was sponsored by lCASE, and organized by M.Y. Hussaini (lCASE) and R. Hirsh (U.S. National Science Foundation). Of those who could not attend, many chose to honor Professor Reshotko by a contribution to the volume dedicated to him. We would like to use this opportunity to express our deep ap preciation to M.Y. Hussaini for initiating this very special tribute to Eli, and to Ms. Emily Todd for her efforts in the volume preparation and in the organization of the symposium.




Informatics in Control, Automation and Robotics


Book Description

The book addresses the latest advances in research and development in the field of informatics in control, robotics and automation. With more than twenty revised and extended articles covering the theoretical aspects as well as applications and their implementation, it offers a factual and well-balanced overview of the state of the art in the field. In addition, it highlights the trends in control of intelligent robots. The book is an up-to-date source of information and inspiration for researchers, engineers and PhD students.




Controlling Chaos and Bifurcations in Engineering Systems


Book Description

Over the last two decades, chaos in engineering systems has moved from being simply a curious phenomenon to one with real, practical significance and utility. Engineers, scientists, and mathematicians have similarly advanced from the passive role of analyzing chaos to their present, active role of controlling chaos-control directed not only at suppression, but also at exploiting its enormous potential. We now stand at the threshold of major advances in the control and synchronization of chaos for new applications across the range of engineering disciplines. Controlling Chaos and Bifurcations in Engineering Systems provides a state-of-the-art survey of the control-and anti-control-of chaos in dynamical systems. Internationally known experts in the field join forces in this volume to form this tutorial-style combination of overview and technical report on the latest advances in the theory and applications of chaos control. They detail various approaches to control and show how designers can use chaos to create a wider variety of properties and greater flexibility in the design process. Chaos control promises to have a major impact on novel time- and energy-critical engineering applications. Within this volume, readers will find many challenging problems-yet unsolved-regarding both the fundamental theory and potential applications of chaos control and anti-control. Controlling Chaos and Bifurcations in Engineering Systems will bring readers up-to-date on recent development in the field and help open the door to new advances.