Chemistry of Water Treatment, Second Edition


Book Description

This second edition demonstrates how chemistry influences the design of water treatment plants and how it should influence the design. Historically, water treatment plants have been designed from hydraulic considerations with little regard to chemical aspects. The many chemical reactions used for removal of pollutants from water simply cannot be forced to occur within current designs. This book re-examines this traditional approach in light of today's water quality and treatment. Will current water treatment processes be sufficient to meet future demands or will new processes have to be devised? Chemistry of Water Treatment assesses the chemical and physical efficacies of current processes to meet the demands of the Safe Drinking water Act, providing expert information to persons responsible for the production of potable water into the next century.




Theory and Practice of Water and Wastewater Treatment


Book Description

Provides an excellent balance between theory and applications in the ever-evolving field of water and wastewater treatment Completely updated and expanded, this is the most current and comprehensive textbook available for the areas of water and wastewater treatment, covering the broad spectrum of technologies used in practice today—ranging from commonly used standards to the latest state of the art innovations. The book begins with the fundamentals—applied water chemistry and applied microbiology—and then goes on to cover physical, chemical, and biological unit processes. Both theory and design concepts are developed systematically, combined in a unified way, and are fully supported by comprehensive, illustrative examples. Theory and Practice of Water and Wastewater Treatment, 2nd Edition: Addresses physical/chemical treatment, as well as biological treatment, of water and wastewater Includes a discussion of new technologies, such as membrane processes for water and wastewater treatment, fixed-film biotreatment, and advanced oxidation Provides detailed coverage of the fundamentals: basic applied water chemistry and applied microbiology Fully updates chapters on analysis and constituents in water; microbiology; and disinfection Develops theory and design concepts methodically and combines them in a cohesive manner Includes a new chapter on life cycle analysis (LCA) Theory and Practice of Water and Wastewater Treatment, 2nd Edition is an important text for undergraduate and graduate level courses in water and/or wastewater treatment in Civil, Environmental, and Chemical Engineering.




Chemistry of Water Treatment


Book Description

This second edition demonstrates how chemistry influences the design of water treatment plants and how it should influence the design. Historically, water treatment plants have been designed from hydraulic considerations with little regard to chemical aspects. The many chemical reactions used for removal of pollutants from water simply cannot be forced to occur within current designs. This book re-examines this traditional approach in light of today's water quality and treatment. Will current water treatment processes be sufficient to meet future demands or will new processes have to be devised? Chemistry of Water Treatment assesses the chemical and physical efficacies of current processes to meet the demands of the Safe Drinking water Act, providing expert information to persons responsible for the production of potable water into the next century.




Chemistry of Ozone in Water and Wastewater Treatment


Book Description

Even though ozone has been applied for a long time for disinfection and oxidation in water treatment, there is lack of critical information related to transformation of organic compounds. This has become more important in recent years, because there is considerable concern about the formation of potentially harmful degradation products as well as oxidation products from the reaction with the matrix components. In recent years, a wealth of information on the products that are formed has accumulated, and substantial progress in understanding mechanistic details of ozone reactions in aqueous solution has been made. Based on the latter, this may allow us to predict the products of as yet not studied systems and assist in evaluating toxic potentials in case certain classes are known to show such effects. Keeping this in mind, Chemistry of Ozone in Water and Wastewater Treatment: From Basic Principles to Applications discusses mechanistic details of ozone reactions as much as they are known to date and applies them to the large body of studies on micropollutant degradation (such as pharmaceuticals and endocrine disruptors) that is already available. Extensively quoting the literature and updating the available compilation of ozone rate constants gives the reader a text at hand on which his research can be based. Moreover, those that are responsible for planning or operation of ozonation steps in drinking water and wastewater treatment plants will find salient information in a compact form that otherwise is quite disperse. A critical compilation of rate constants for the various classes of compounds is given in each chapter, including all the recent publications. This is a very useful source of information for researchers and practitioners who need kinetic information on emerging contaminants. Furthermore, each chapter contains a large selection of examples of reaction mechanisms for the transformation of micropollutants such as pharmaceuticals, pesticides, fuel additives, solvents, taste and odor compounds, cyanotoxins. Authors: Prof. Dr. Clemens von Sonntag, Max-Planck-Institut für Bioanorganische Chemie, Mülheim an der Ruhr, and Instrumentelle Analytische Chemie, Universität Duisburg-Essen, Essen, Germany and Prof. Dr. Urs von Gunten, Eawag, Swiss Federal Institute of Aquatic Science and Technology, Dübendorf, and Ecole Polytechnique Federal de Lausanne, Lausanne, Switzerland.







Chemistry of Advanced Environmental Purification Processes of Water


Book Description

Chemistry of Advanced Environmental Purification Processes of Water covers the fundamentals behind a broad spectrum of advanced purification processes for various types of water, showing numerous applications through worked examples. Purification processes for groundwater, soil water, reusable water, and raw water are examined where they are in use full-scale, as a pilot approach, or in the laboratory. This book also describes the production of ceramic particles (nanochemistry) and materials for the creation of filtration systems and catalysts that are involved. - Uses chemistry fundamentals to explain the mechanisms behind the various purification processes - Explains in detail process equipment and technical applications - Describes the production of ceramic particles and other new materials applicable to filtration systems - Includes worked examples




Green Materials for Sustainable Water Remediation and Treatment


Book Description

Inadequate access to clean water afflicts people throughout the world, and in developing countries any solution to this challenge must be achieved at a low cost and low energy demand. At the same time, the use of chemicals, and subsequent environmental impact must also be reduced. Green and sustainable water remediation is a rapidly growing field of interest to governments and corporations alike, with considerable input from academics, environmental consultants and public interest groups. This book presents a focused set of articles covering a range of topics in the field, examining not only the adoption of natural products for water remediation, but also the synthesis of new materials and emerging clean technologies. Contributors from across the globe (including some "on the ground" in the developing world) present a comprehensive digest in the form of review-style articles highlighting the current thinking and direction in the field. Interested stakeholders from all sectors will find this book invaluable, and postgraduate students of chemical engineering or environmental science will benefit from the real-world applications presented.




Soil and Water Chemistry


Book Description

The second edition of a bestseller, Soil and Water Chemistry: An Integrative Approach maintains the balanced perspective that made the first edition a hugely popular textbook. The second edition includes new figures and tables, new chapters, and expanded exercises in each chapter. It covers topics including soil chemical environment, soil minerals,




Practical Wastewater Treatment


Book Description

Practical techniques for handling industrial waste and designing treatment facilities Practical Wastewater Treatment is designed as a teaching and training tool for chemical, civil, and environmental engineers. Based on an AIChE training course, developed and taught by the author, this manual equips readers with the skills and knowledge needed to design a wastewater treatment plant and handle various types of industrial wastes. With its emphasis on design issues and practical considerations, the manual enables readers to master treatment techniques for managing a wide range of industrial wastes, including oil, blood and protein, milk, plating, refinery, and phenolic and chemical plant wastes. A key topic presented in the manual is biological modeling for designing wastewater treatment plants. The author demonstrates how these models lead to both more efficient and more economical plants. As a practical training tool, this manual contains a number of features to assist readers in tackling complex, real-world problems, including: * Examples and worked problems throughout the manual demonstrate how various treatment plants and treatment techniques work * Figures and diagrams help readers visualize and understand complex design issues * References as well as links to online resources serve as a gateway to additional information * Practical design hints, stemming from the author's extensive experience, help readers save time and avoid unwanted and expensive pitfalls * Clear and logically organized presentation has been developed and refined based on an AIChE course taught by the author in the United States, Mexico, and Venezuela Whether a novice or experienced practitioner, any engineer who deals with the treatment of industrial waste will find a myriad of practical advice and useful techniques that they can immediately apply to solve problems in wastewater treatment.




Water and Wastewater Treatment


Book Description

Lauded for its engaging, highly readable style, the best-selling first edition became the premier guide for nonengineers involved in water and wastewater treatment operations. Water and Wastewater Treatment: A Guide for the Nonengineering Professional, Second Edition continues to provide a simple, nonmathematical account of the unit processes used to treat both drinking water and wastewater. Completely revised and expanded, this second edition adds new material on technological advances, regulatory requirements, and other current issues facing the water and wastewater industries. Using step-by-step, jargon-free language, the authors present all the basic unit processes involved in drinking water and wastewater treatment. They describe each unit process, the function of the process in water or wastewater treatment, and the basic equipment used in each process. They also explain how the processes fit together within a drinking water or wastewater treatment system and discuss the fundamental concepts that constitute water and wastewater treatment processes as a whole. Avoiding mathematics, chemistry, and biology, the book includes numerous illustrations for easy comprehension of concepts and processes. It also contains chapter summaries and an extensive glossary of terms and abbreviations for quick reference.