Author : Xiao-Ling Zhao
Publisher :
Page : 121 pages
File Size : 23,94 MB
Release : 2001
Category : Lightweight construction
ISBN : 9783824905652
Author : X-L Zhao
Publisher : Elsevier
Page : 96 pages
File Size : 21,99 MB
Release : 2000-05-08
Category : Technology & Engineering
ISBN : 0857093126
This International Institute of Welding (IIW) report was presented at the 52nd Annual Assembly in Lisbon in June 1999. It contains recommendations representing a consensus on international best practice, focusing on a 'hot spot stress' approach.A wide range of joint types is covered, the new fatigue design curve for both RHS and CHS is dealt with and detailed values for stress concentration factors are provided.The purpose of this current IIW document is to serve both as an International Standards Organisation (ISO) draft specification and as a model standard for national and regional specifications worldwide.The Recommendations (Part one) and Commentary (Part two) were edited by Dr X-L Zhao of Monash University, Australia and Professor J A Packer of the University of Toronto, Canada.
Author : X. L. Zhao
Publisher :
Page : pages
File Size : 26,5 MB
Release : 2003
Category :
ISBN : 9783824907748
Author : Puthli
Publisher : CRC Press
Page : 616 pages
File Size : 46,97 MB
Release : 2001-01-01
Category : Technology & Engineering
ISBN : 9789058091918
A reference for architects and engineers, this work covers themes on architecture, case studies, and the application and strengths of tubular beams.
Author : A. F. Hobbacher
Publisher : Springer
Page : 153 pages
File Size : 46,84 MB
Release : 2015-12-23
Category : Technology & Engineering
ISBN : 3319237578
This book provides a basis for the design and analysis of welded components that are subjected to fluctuating forces, to avoid failure by fatigue. It is also a valuable resource for those on boards or commissions who are establishing fatigue design codes. For maximum benefit, readers should already have a working knowledge of the basics of fatigue and fracture mechanics. The purpose of designing a structure taking into consideration the limit state for fatigue damage is to ensure that the performance is satisfactory during the design life and that the survival probability is acceptable. The latter is achieved by the use of appropriate partial safety factors. This document has been prepared as the result of an initiative by Commissions XIII and XV of the International Institute of Welding (IIW).
Author : Dieter Radaj
Publisher : Woodhead Publishing
Page : 661 pages
File Size : 41,53 MB
Release : 2006-10-30
Category : Technology & Engineering
ISBN : 1845691881
Local approaches to fatigue assessment are used to predict the structural durability of welded joints, to optimise their design and to evaluate unforeseen joint failures. This standard work provides a systematic survey of the principles and practical applications of the various methods. It covers the hot spot structural stress approach to fatigue in general, the notch stress and notch strain approach to crack initiation and the fracture mechanics approach to crack propagation. Seam-welded and spot-welded joints in structural steels and aluminium alloys are also considered.This completely reworked second edition takes into account the tremendous progress in understanding and applying local approaches which has been achieved in the last decade. It is a standard reference for designers, structural analysts and testing engineers who are responsible for the fatigue-resistant in-service behaviour of welded structures. - Completely reworked second edition of a standard work providing a systematic survey of the principles and practical applications of the various methods - Covers the hot spot structural stress approach to fatigue in general, the notch stress and notch strain approach to crack initiation and the fracture mechanics approach to crack propagation. - Written by a distinguished team of authors
Author : Angel Alonso
Publisher : Routledge
Page : 646 pages
File Size : 19,25 MB
Release : 2017-10-02
Category : Technology & Engineering
ISBN : 1351406752
This volume contains the Kurobane lecture and proceedings of the Tenth International Symposium on Tubular Structures - ISTS10, held in Madrid, Spain, 18-20 September 2003. The ISTS10 provides a platform for the presentation and discussion of seventy-three lectures covering themes including: bridges; roofs; design aspects and case studies; static joint behaviour; fatigue; members; beam-column connections; finite element methods; concrete filled tubes; trusses and frames; cast nodes; and behaviour of tubular structures under fire. This book provides a useful reference work for architects, civil and mechanical engineers, designers, manufacturers and contractors involved with tubular structures.
Author : JeffreyA. Packer
Publisher : Routledge
Page : 710 pages
File Size : 46,93 MB
Release : 2017-10-02
Category : Technology & Engineering
ISBN : 1351406728
This topical book contains the latest scientific and engineering developments in the field of tubular steel structures, as presented at the "11th International Symposium and IIW International Conference on Tubular Structures". The International Symposium on Tubular Structures (ISTS) has a long-standing reputation for being the principal showcase for manufactured tubing and the prime international forum for discussion of research, developments and applications in this field. Various key and emerging subjects in the field of hollow structural sections are covered, such as: novel applications and case studies, static and fatigue behaviour of connections/joints, concrete-filled and composite tubular members, earthquake resistance, specification and code developments, material properties and structural reliability, impact resistance and brittle fracture, fire resistance, casting and fabrication innovations. Research and development issues presented in this book are applicable to buildings, bridges, offshore structures, entertainment rides, cranes, towers and various mechanical and agricultural equipment. This book is thus a pertinent reference source for architects, civil and mechanical engineers, designers, steel fabricators and contractors, manufacturers of hollow sections or related construction products, trade associations involved with tubing, owners or developers of tubular structures, steel specification committees, academics and research students. The conference presentations herein include two keynote lectures (the International Institute of Welding Houdremont Lecture and the ISTS Kurobane Lecture), plus finalists in the CIDECT Student Papers Competition. The 11th International Symposium and IIW International Conference on Tubular Structures – ISTS11 – took place in Québec City, Canada from August 31 to September 2, 2006.
Author : Z.Y. Shen
Publisher : CRC Press
Page : 690 pages
File Size : 42,64 MB
Release : 2008-09-11
Category : Technology & Engineering
ISBN : 0203882814
Presentation of the latest scientific and engineering developments in the field of tubular steel structures. Covers key and emerging subjects of hollow structural sections, such as: static and fatigue behaviour of connections/joints, concrete filled hollow sections and composite tubular members, offshore structures, earthquake resistance,
Author : Amin Heidarpour
Publisher : CRC Press
Page : 1352 pages
File Size : 47,16 MB
Release : 2017-11-13
Category : Technology & Engineering
ISBN : 1351210823
Tubular Structures XVI contains the latest scientific and engineering developments in the field of tubular steel structures, as presented at the 16th International Symposium on Tubular Structures (ISTS16, Melbourne, Australia, 4-6 December 2017). The International Symposium on Tubular Structures (ISTS) has a long-standing reputation for being the principal showcase for manufactured tubing and the prime international forum for presentation and discussion of research, developments and applications in this field. Various key and emerging subjects in the field of hollow structural sections are covered, such as: special applications and case studies, static and fatigue behaviour of connections/joints, concrete-filled and composite tubular members and offshore structures, earthquake and dynamic resistance, specification and standard developments, material properties and section forming, stainless and high-strength steel structures, fire, impact and blast response. Research and development issues presented in this topical book are applicable to buildings, bridges, offshore structures, cranes, trusses and towers. Tubular Structures XVI is thus a pertinent reference source for architects, civil and mechanical engineers, designers, steel fabricators and contractors, manufacturers of hollow sections or related construction products, trade associations involved with tubing, owners or developers of tubular structures, steel specification committees, academics and research students all around the world.
