Designing Computer-Based Learning Materials


Book Description

First published in 2001, this volume demonstrates how computer-based learning has the potential to provide a highly motivating learning experience, that it also has the potential to achieve exactly the opposite, and that the difference between these two extremes is the quality of the learning design. The challenge for the learning designer isn’t a simple one. You are being asked to prepare interactive learning for someone you can’t see and with whom the only interaction you are likely to have is via limited written communication. Fortunately help is at hand in Alan Clarke’s Designing Computer-Based Learning Materials. Dr. Clarke offers a definitive guide to each of the many elements involved in good design. This book explores the principles of adult learning, and relates to the potential, features and impact of computer-based learning. This is not a ‘how to...’ book, but rather one seeking to help you understand the different elements which go into computer-based learning. If you are commissioning material, it will help you to understand the contractors’ constraints. If you are designing materials yourself, it will allow you to avoid many of the errors it is all too easy to make when developing them. Computer-based learning materials are not all the same: their range reflects the variety of learners that use them and purposes they are used for; the different learning environments that are available to people; the different subjects that they wish to learn and the level to which they wish to take them. In the face of such a complex task, involving so many factors and variables, it is essential that the learning designer understands what is involved and uses a rigorous process for envisioning, planning, designing, implementing and testing their solution. This is a book about learning design and not about software production and, as such, it provides any aspiring designers with the fundamentals of producing the highly motivating learning experience, which should be their objective.




Developing Technical Training


Book Description

Since it was first published almost twenty years ago, Developing Technical Training has been a reliable resource for both new and seasoned training specialists. The third edition of this classic book outlines a systematic approach called the Instructional Systems Design (ISD) process that shows how to teach technical content defined as facts, concepts, processes, procedures, and principles. Whether you teach “hard” or “soft” skills, or design lessons for workbooks or computers, you will find the best training methods in this book. Using these techniques, you can create learning environments that will lead to the most efficient and effective acquisition of new knowledge and skills. Throughout the book, Clark defines each content type and illustrates how to implement the best instructional methods for delivery in either print or e-learning media.




Designing Computer-Based Learning Materials


Book Description

This book should be of value to all those who are considering the use of or have only just begun to use the computer as a learning aid, regardless of the educational level and the discipline being considered. Although the focus is on computer-based instruction in physics and mathematics at the university- and secondary-school levels, the strategies and problems are universally applicable. At the NATO Advanced Study Institute upon which this volume is based, the obstacles encountered by those engaged in such activities were similar in each of the eighteen countries represented. Despite many false starts by those engaged in applying the computer as a learning aid, we believe unequivocally that the computer presents a unique educational tool yet to be exploited adequately. The reasons for slow development may become obvious as one reads this book: the effort required to achieve measurable success is not trivial. Extensive planning and team efforts are often necessary. Unfortunately, many well-intentioned educators discover this too late. We emphasize very early that it is the opportunity to engage students as active participants in the learning process which sets computer-based learning apart from the learning potential of other electronic media.







Encyclopedia of the Sciences of Learning


Book Description

Over the past century, educational psychologists and researchers have posited many theories to explain how individuals learn, i.e. how they acquire, organize and deploy knowledge and skills. The 20th century can be considered the century of psychology on learning and related fields of interest (such as motivation, cognition, metacognition etc.) and it is fascinating to see the various mainstreams of learning, remembered and forgotten over the 20th century and note that basic assumptions of early theories survived several paradigm shifts of psychology and epistemology. Beyond folk psychology and its naïve theories of learning, psychological learning theories can be grouped into some basic categories, such as behaviorist learning theories, connectionist learning theories, cognitive learning theories, constructivist learning theories, and social learning theories. Learning theories are not limited to psychology and related fields of interest but rather we can find the topic of learning in various disciplines, such as philosophy and epistemology, education, information science, biology, and – as a result of the emergence of computer technologies – especially also in the field of computer sciences and artificial intelligence. As a consequence, machine learning struck a chord in the 1980s and became an important field of the learning sciences in general. As the learning sciences became more specialized and complex, the various fields of interest were widely spread and separated from each other; as a consequence, even presently, there is no comprehensive overview of the sciences of learning or the central theoretical concepts and vocabulary on which researchers rely. The Encyclopedia of the Sciences of Learning provides an up-to-date, broad and authoritative coverage of the specific terms mostly used in the sciences of learning and its related fields, including relevant areas of instruction, pedagogy, cognitive sciences, and especially machine learning and knowledge engineering. This modern compendium will be an indispensable source of information for scientists, educators, engineers, and technical staff active in all fields of learning. More specifically, the Encyclopedia provides fast access to the most relevant theoretical terms provides up-to-date, broad and authoritative coverage of the most important theories within the various fields of the learning sciences and adjacent sciences and communication technologies; supplies clear and precise explanations of the theoretical terms, cross-references to related entries and up-to-date references to important research and publications. The Encyclopedia also contains biographical entries of individuals who have substantially contributed to the sciences of learning; the entries are written by a distinguished panel of researchers in the various fields of the learning sciences.




Automating Instructional Design: Computer-Based Development and Delivery Tools


Book Description

This institute was organized and presented by an international group of scholars interested in the advancement of instructional design automation through theory, research and applied evaluation. Members of the organizing committee included Dr. Klaus Breuer from disce (Germany), Dr. Jose J. Gonzalez from Agder College of Engineering (Norway), Dr. Begofia Gros from the University of Barcelona, Dr. J. Michael Spector from the Armstrong Laboratory (USA). Dr. Gonzalez, co-director of the institute, and the staff of Agder College were directly responsible for the preparation and operation of the institute in Grimstad, Norway. The institute was held on the campus of Agder College of Engineering, July 12-23, 1993. The theme of the institute extended the initial work developed by the presenters at a NATO Advanced Research Workshop held in Sitges, Spain in 1992. During the two week institute, 21 presentations were made including papers and demonstrations. In addition to the formal presentations, working groups and on-site study groups provided opportunities for the students to participate directly in program activities. An important outcome for the working groups was the formal preparation of their efforts in chapters for this volume.




Instructional Design Theory


Book Description

This pack contains two guides to Microsoft Windows 98. Windows 98 User Manual teaches how to use Windows and Windows 98 Hints and Hacks provides advanced information for the user already familiar with Windows.




Graphics for Learning


Book Description

Are you getting the most learning value from visuals? Thoroughly revised and updated, Graphics for Learning is the second edition of the bestselling book that summarizes the guidelines for the best use of graphics for instructional materials, including multimedia, texts, working aids, and slides. The guidelines are based on the most current empirical scientific research and are illustrated with a wealth of examples from diverse training materials. The authors show how to plan illustrations for various types of content, including facts, concepts, processes, procedures, and principles. The book also discusses technical and environmental factors that will influence how instructional professionals can apply the guidelines to their training projects. Praise for the First Edition "For years I've been looking for a book that links cognitive research on learning to graphics and instructional design. Here it is! Ruth Clark and Chopeta Lyons not only explain how to make graphics work—they've created a very interesting read, full of useful guidelines and examples." —Lynn Kearny, CPT, instructional designer and graphic communicator, Graphic Tools for Thinking and Learning "Finally! A book that integrates visual design into the larger context of instructional design and development." —Linda Lohr, Ed.D., author, Creating Graphics for Learning and assistant professor, University of Northern Colorado




Multimedia-based Instructional Design


Book Description

Multimedia-Based Instructional Design is a thoroughly revised and updated second edition of the best-selling book that provided a complete guide to designing and developing interactive multimedia training. While most training companies develop their training programs in many different technological delivery media—computer-based, web-based, and distance learning technologies—this unique book demonstrates that the same instructional design process can be used for all media. Using just one process reduces cycle time for course development—and also reduces costs.




Instructional Models in Computer-Based Learning Environments


Book Description

In the last decade there have been rapid developments in the field of computer-based learning environments. A whole new generation of computer-based learning environments has appeared, requiring new approaches to design and development. One main feature of current systems is that they distinguish different knowledge bases that are assumed to be necessary to support learning processes. Current computer-based learning environments often require explicit representations of large bodies of knowledge, including knowledge of instruction. This book focuses on instructional models as explicit, potentially implementable representations of knowledge concerning one or more aspects of instruction. The book has three parts, relating to different aspects of the knowledge that should be made explicit in instructional models: knowledge of instructional planning, knowledge of instructional strategies, and knowledge of instructional control. The book is based on a NATO Advanced Research Workshop held at the University of Twente, The Netherlands in July 1991.