Author : Firuz Zare
Publisher : Bentham Science Publishers
Page : 126 pages
File Size : 12,10 MB
Release : 2011-11-25
Category : Technology & Engineering
ISBN : 1608052400
This E-Book focuses on conducted and radiated emission noise generated by different power converters such as Switch Mode power Supplies and DC-AC Inverters. EMI filter design and different approaches to predict common mode and differential mode noise are
Author : B. Jayant Baliga
Publisher : Woodhead Publishing
Page : 420 pages
File Size : 34,61 MB
Release : 2018-10-17
Category : Technology & Engineering
ISBN : 0081023073
Wide Bandgap Semiconductor Power Devices: Materials, Physics, Design and Applications provides readers with a single resource on why these devices are superior to existing silicon devices. The book lays the groundwork for an understanding of an array of applications and anticipated benefits in energy savings. Authored by the Founder of the Power Semiconductor Research Center at North Carolina State University (and creator of the IGBT device), Dr. B. Jayant Baliga is one of the highest regarded experts in the field. He thus leads this team who comprehensively review the materials, device physics, design considerations and relevant applications discussed. - Comprehensively covers power electronic devices, including materials (both gallium nitride and silicon carbide), physics, design considerations, and the most promising applications - Addresses the key challenges towards the realization of wide bandgap power electronic devices, including materials defects, performance and reliability - Provides the benefits of wide bandgap semiconductors, including opportunities for cost reduction and social impact
Author : Frede Blaabjerg
Publisher : MDPI
Page : 476 pages
File Size : 28,64 MB
Release : 2019-06-24
Category : Technology & Engineering
ISBN : 3038979740
Power electronics technology is still an emerging technology, and it has found its way into many applications, from renewable energy generation (i.e., wind power and solar power) to electrical vehicles (EVs), biomedical devices, and small appliances, such as laptop chargers. In the near future, electrical energy will be provided and handled by power electronics and consumed through power electronics; this not only will intensify the role of power electronics technology in power conversion processes, but also implies that power systems are undergoing a paradigm shift, from centralized distribution to distributed generation. Today, more than 1000 GW of renewable energy generation sources (photovoltaic (PV) and wind) have been installed, all of which are handled by power electronics technology. The main aim of this book is to highlight and address recent breakthroughs in the range of emerging applications in power electronics and in harmonic and electromagnetic interference (EMI) issues at device and system levels as discussed in robust and reliable power electronics technologies, including fault prognosis and diagnosis technique stability of grid-connected converters and smart control of power electronics in devices, microgrids, and at system levels.
Author : H. Bülent Ertan
Publisher : Springer Science & Business Media
Page : 766 pages
File Size : 30,62 MB
Release : 2013-06-29
Category : Technology & Engineering
ISBN : 9401593876
Electrical drives lie at the heart of most industrial processes and make a major contribution to the comfort and high quality products we all take for granted. They provide the controller power needed at all levels, from megawatts in cement production to milliwatts in wrist watches. Other examples are legion, from the domestic kitchen to public utilities. The modern electrical drive is a complex item, comprising a controller, a static converter and an electrical motor. Some can be programmed by the user. Some can communicate with other drives. Semiconductor switches have improved, intelligent power modules have been introduced, all of which means that control techniques can be used now that were unimaginable a decade ago. Nor has the motor side stood still: high-energy permanent magnets, semiconductor switched reluctance motors, silicon micromotor technology, and soft magnetic materials produced by powder technology are all revolutionising the industry. But the electric drive is an enabling technology, so the revolution is rippling throughout the whole of industry.
Author : Robert Smolenski
Publisher : Springer Science & Business Media
Page : 175 pages
File Size : 41,18 MB
Release : 2012-03-23
Category : Technology & Engineering
ISBN : 1447129598
As power systems develop to incorporate renewable energy sources, the delivery systems may be disrupted by the changes involved. The grid’s technology and management must be developed to form Smart Grids between consumers, suppliers and producers. Conducted Electromagnetic Interference (EMI) in Smart Grids considers the specific side effects related to electromagnetic interference (EMI) generated by the application of these Smart Grids. Conducted Electromagnetic Interference (EMI) in Smart Grids presents specific EMI conducted phenomena as well as effective methods to filter and handle them once identified. After introduction to Smart Grids, the following sections cover dedicated methods for EMI reduction and potential avenues for future development including chapters dedicated to: •potential system services, •descriptions of the EMI spectra shaping methods, •methods of interference voltage compensation, and theoretical analysis of experimental results. By focusing on these key aspects, Conducted Electromagnetic Interference (EMI) in Smart Grids provides a concise and comprehensive coverage of an extensive subject matter. It constitutes a key resource for any industry practitioners, researchers or system designers with interest in Smart Grids, particularly their electromagnetic compatibility in the conducted EMI frequency range.
Author : Paolo Stefano Crovetti
Publisher : MDPI
Page : 206 pages
File Size : 24,17 MB
Release : 2021-08-31
Category : Technology & Engineering
ISBN : 3036505008
Recent progress in the fields of Electrical and Electronic Engineering has created new application scenarios and new Electromagnetic Compatibility (EMC) challenges, along with novel tools and methodologies to address them. This volume, which collects the contributions published in the “Electromagnetic Interference and Compatibility” Special Issue of MDPI Electronics, provides a vivid picture of current research trends and new developments in the rapidly evolving, broad area of EMC, including contributions on EMC issues in digital communications, power electronics, and analog integrated circuits and sensors, along with signal and power integrity and electromagnetic interference (EMI) suppression properties of materials.
Author : Ryszard Strzelecki
Publisher : MDPI
Page : 384 pages
File Size : 22,47 MB
Release : 2021-09-02
Category : Technology & Engineering
ISBN : 3036508228
The Special Issue "Industrial and Technological Applications of Power Electronics Systems" focuses on: - new strategies of control for electric machines, including sensorless control and fault diagnosis; - existing and emerging industrial applications of GaN and SiC-based converters; - modern methods for electromagnetic compatibility. The book covers topics such as control systems, fault diagnosis, converters, inverters, and electromagnetic interference in power electronics systems. The Special Issue includes 19 scientific papers by industry experts and worldwide professors in the area of electrical engineering.
Author : Jaroslaw Luszcz
Publisher : John Wiley & Sons
Page : 257 pages
File Size : 16,40 MB
Release : 2018-06-06
Category : Technology & Engineering
ISBN : 1119388961
Provides a concise and thorough reference for designing electrical and electronic systems that employ adjustable speed drives Electrical and electronic systems that employ adjustable speed drives are being increasingly used in present-day automation applications. They are considered by many application engineers as one of the most interfering components, especially in a contemporarily faced industrial environment. This book fills the gap between the high-level academic knowledge in the electromagnetic compatibility (EMC) field and the recommended practical rules for assuring electromagnetic compatibility margin. It focuses on finding and formulating the issues that often occur with the generation and propagation of conducted emission in AC motor drives fed by frequency converters, rather than proposing specific solutions for dealing with them. It also features explanations of selected academic backgrounds of EMC and presents practical case studies. The book starts with an introduction to conducted emission in adjustable speed drives. It then goes on to offer in-depth chapters covering conducted emission origins in switch-mode power converters; conducted emission generation by frequency converter in adjustable speed drives (ASD); propagation of motor side originated conducted emission towards the power grid; modeling of conducted emission in ASD; broadband behavior of ASD components; and impact of a motor feeding cable on CM currents generated in ASD. In addition, this resource: Presents state-of-the-art analysis of undesirable high frequency phenomena accompanying AC motor speed control Discusses the fundamentals of phenomena of electromagnetic interference (EMI) generation in switch mode static converters Provides methodology of modeling-conducted EMI generation and propagation in ASD High Frequency Conducted Emission in AC Motor Drives Fed By Frequency Converters: Sources and Propagation Paths will appeal to scholars and a wide range of professionals who are involved in the stages of development, design, and application of adjustable speed drives in accordance with ever-increasing EMC requirements.
Author :
Publisher :
Page : 532 pages
File Size : 48,91 MB
Release : 2020-06-12
Category : Technology & Engineering
ISBN : 9783039361328
Author : Robert Smolenski
Publisher : Springer Science & Business Media
Page : 175 pages
File Size : 45,46 MB
Release : 2012-03-22
Category : Technology & Engineering
ISBN : 1447129601
As power systems develop to incorporate renewable energy sources, the delivery systems may be disrupted by the changes involved. The grid’s technology and management must be developed to form Smart Grids between consumers, suppliers and producers. Conducted Electromagnetic Interference (EMI) in Smart Grids considers the specific side effects related to electromagnetic interference (EMI) generated by the application of these Smart Grids. Conducted Electromagnetic Interference (EMI) in Smart Grids presents specific EMI conducted phenomena as well as effective methods to filter and handle them once identified. After introduction to Smart Grids, the following sections cover dedicated methods for EMI reduction and potential avenues for future development including chapters dedicated to: •potential system services, •descriptions of the EMI spectra shaping methods, •methods of interference voltage compensation, and theoretical analysis of experimental results. By focusing on these key aspects, Conducted Electromagnetic Interference (EMI) in Smart Grids provides a concise and comprehensive coverage of an extensive subject matter. It constitutes a key resource for any industry practitioners, researchers or system designers with interest in Smart Grids, particularly their electromagnetic compatibility in the conducted EMI frequency range.
