Energy Efficiency Improvements in Electric Motors and Drives


Book Description

The reduction of energy consumption through improvements in energy efficiency has become an important goal for all countries, in order to improve the efficiency of the economy, to increase energy supply security, and to reduce the emissions of CO and other pollutants caused by power· generation. 2 Electric motors use over half of all electricity consumed in developed countries. Typically 60-80% of the electricity which is used in the industrial sector and about 35% of the electricity used in the commercial sector in the European Union is consumed by motors. In industry, a motor consumes an annual quantity of electricity which corresponds to approximately 5 times its purchase price, throughout its whole life of aroun~ 12 to 20 years. Motors are by far the most important type of electric load. They are used in all sectors and in a wide range of applications, namely the following: fans, compressors, pumps, mills, winders, elevators, transports, home appliances, and office equipment, etc. It is their wide use that makes motor drive systems one of the main targets to achieve significant energy savings. As motors are the largest USers of electrical energy, even small efficiency improvements will produce very large energy savings.




Energy Efficiency in Electric Motors, Drives, Power Converters and Related Systems


Book Description

Today, there is a great deal of attention focused on sustainable growth worldwide. The increase in efficiency in the use of energy may even, in this historical moment, bring greater benefit than the use of renewable energies. Electricity appears to be the most sustainable of energies and the most promising hope for a planet capable of growing without compromising its own health and that of its inhabitants. Power electronics and electrical drives are the key technologies that will allow energy savings through the reduction of energy losses in many applications. This Special Issue has collected several scientific contributions related to energy efficiency in electrical equipment. Some articles are dedicated to the use and optimization of permanent magnet motors, which allow obtaining the highest level of efficiency. Most of the contributions describe the energy improvements that can be achieved with power electronics and the use of suitable control techniques. Last but not least, some articles describe interesting solutions for hybrid vehicles, which were created mainly to save energy in the smartest way possible.




Energy Efficiency in Motor Driven Systems


Book Description

This book reports the state of the art of energy-efficient electrical motor driven system technologies, which can be used now and in the near future to achieve significant and cost-effective energy savings. It includes the recent developments in advanced electrical motor end-use devices (pumps, fans and compressors) by some of the largest manufacturers. Policies and programs to promote the large scale penetration of energy-efficient technologies and the market transformation are featured in the book, describing the experiences carried out in different parts of the world. This extensive coverage includes contributions from relevant institutions in the Europe, North America, Latin America, Africa, Asia, Australia and New Zealand.




Electric Motors and Drives


Book Description

"Electric Motors and Drives is intended for non-specialist users of electric motors and drives, filling the gap between maths- and theory-based academic textbooks and the more prosaic 'handbooks', which provide useful detail but little opportunity for the development of real insight and understanding. The book explores all of the widely-used modern types of motor and drive, including conventional and brushless D.C., induction motors and servo dries, providing readers with the knowledge to select the right technology for a given job." "The third edition includes additional diagrams and worked examples throughout. Now topics include digital interfacing and control of drives, direct torque control of induction motors and current-fed operation in DC drives. The material on brushless servomotors has also been expanded."--BOOK JACKET.




Electrical Motor Products


Book Description

Electrical motor products reviews the energy efficiency management laws for electrical motor products in United States, European Union (EU) and China. The energy efficiency certification requirements for the electrical motor products vary from country to country and are summarised here. International standards, testing methods and certification requirements for specific electrical motor products are discussed, including electric motors, pumps and fans. Finally, methods for improving energy efficiency are examined. - Reviews the energy efficiency management laws for electrical motor products in United States, European Union (EU) and China - Highlights the importance of energy efficiency for electrical motor products - Documents energy efficiency certification requirements for electrical motor products and how they vary from country to country







Energy-Efficient Electric Motors, Revised and Expanded


Book Description

This detailed reference provides guidelines for the selection and utilization of electric motors for improved reliability, performance, energy-efficiency, and life-cycle cost. Completely revised and expanded, the book reflects the recent state of the field, as well as recent developments in control electronics, the economics of energy-efficient motors and systems, and advanced power electronic drivers. It includes five new chapters covering key topics such as the fundamentals of power electronics applicable to electric motor drives, adjustable speed drives and their applications, advanced switched reluctance motor drives, and permanent magnet and brushless DC motor drives.







Energy Efficiency Improvements in Electronic Motors and Drives


Book Description

The 1997 Kyoto Conference defined CO2 emISSIOn targets for the developed regions of the world. The EU target of decreasing the emissions 8% below the 1990 level, by 2010, will require a very substantial effort covering basically all activities if such a target is to be reached. Energy-efficient motor systems can provide one of the most important opportunities to achieve electricity savings in a cost effective way, avoiding at the same time the emission of tens of millions of tons of carbon. The reduction of energy consumption through improvements in energy efficiency is one of the major instruments for developed and developing countries to meet the Kyoto commitments. Energy efficiency is also a key element of the European Union (EU) energy policy, since it improves the efficiency of the economy, increases energy supply security, and decreases harmful emissions due to electricity generation. Electric motor systems use over half of all electricity consumed in developed countries. Typically about 70% of the electricity which is used in the industrial sector and about 35% of the electricity used in the commercial sector in the EU is consumed by motor systems. In industry, a motor on average consumes an annual quantity of electricity which corresponds to approximately 5 times its purchase price, throughout its whole life of around 12 to 20 years.




Energy-saving Principles and Technologies for Induction Motors


Book Description

A unique guide to the integration of three-phase induction motors with the emphasis on conserving energy • The energy-saving principle and technology for induction motor is a new topic, and there are few books currently available; this book provides a guide to the technology and aims to bringabout significant advancement in research, and play an important role in improving the level of motor energy saving • Includes new and innovative topics such as a case study of energy saving in beam pumping system, and reactive compensation as a means of energy saving • The authors have worked in this area for 20 years and this book is the result of their accumulated research and expertise. It is unique in its integration of three-phase induction motors with the emphasis on conserving energy • Integrates the saving-energy principle, technology, and method of induction motors with on-site experiences, showing readers how to meet the practical needs and to apply the theory into practice. It also provides case studies and analysis which can help solve problems on-site