Book Description
The feasibility of enhancing the post-buckling load bearing capability of carbon/epoxy----- - composite plate/panel structures' utilizing embedded activated near equiatomic nickeltitanium, Ni-Ti, shape memory alloy, SMA, wire actuators has been investigated. Enhanced post-buckling is achieved through utilization of the unique shape memory phenomenon inherent within the Ni-Ti material. The unique phenomenon requiring a thermal stimulus. Within this investigation, such a thermal stimulus is provided for by an electrical current. Several host laminates, varying in lay-up architecture, have been considered. Two control strategies have been employed that utilize the unique SMA response at an elevated temperature. Control strategy 1 features embedded SMA actuators located within tubes that run along the specimens neutral plane. Here, the SMA's are constrained to external boundaries. Control strategy 2 also features embedded SMA actuators. For this control strategy, however, the actuators are partially constrained to the host laminate. For each strategy, upon SMA energization, shape memory constraint results with the formation of a recovery force within the SMA material. It is this recovery force that is employed to control the post-buckling response of the selected laminated specimens. A requirement for control strategy 2 is that the SMA/host interface must be of sufficient quality to sustain an elevated temperature as well as the imposed recovery force. Pertaining to control strategy 1, for the associated specimens, activation of constrained pre-strained SMA wire actuators can result with a significant specimen post-buckled deflection alleviation while under the influence of an external compressive load that is approximately three times the critical buckling value. While not as effective as control strategy 1, the concept behind control strategy 2 has been shown to work. Its efficient, or optimal, utilization, however, has yet to be demonstrated. For all the specimen con.