Bridge Evaluation, Repair and Rehabilitation


Book Description

Evaluation, repair and rehabilitation of bridges are increasingly important topics in the effort to deal with the deteriorating infrastructure. For example, in the United States about 40 percent of the nation's 570,000 bridges are classified, according to the Federal Highway Administra tion's (FHW A) criteria, as deficient and in need of rehabilitation and replacement. In other countries the situation is similar. FHW A estimates the cost of a bridge replacement and reha bilitation program at 50 billion dollars. The major factors that have contributed to the present situation are: the age, inadequate maintenance, increasing load spectra and environmental contamination. The deficient bridges are posted, repaired or replaced. The disposition of bridges involves clear economical and safety implications. To avoid high costs of replacement or repair, the evaluation must accurately reveal the present load carrying capacity of the struc ture and predict loads and any further changes in the capacity (deterioration) in the applicable time span. Accuracy of bridge evaluation can be improved by using the recent developments in bridge diagnostics, structural tests, material tests, structural analysis and probabilistic methods. There is a need for an international exchange of advanced experience to increase the research effi ciency. The Workshop is organized on the premise that the exchange of existing American and European experience in the area of bridge evaluation, repair and rehabilitation is beneficial for both parties involved.




Regulation of Weights, Lengths, and Widths of Commercial Motor Vehicles


Book Description

TRB Special Report 267 - Regulation of Weights, Lengths, and Widths of Commercial Motor Vehicles recommends the creation of an independent public organization to evaluate the effects of truck traffic, pilot studies of new truck designs, and a change in federal law authorizing states to issue permits for operation of larger trucks on the Interstates. In 1991, Congress placed a freeze on maximum truck weights and dimensions. Some safety groups were protesting against the safety implications of increased truck size and weight, and the railroads were objecting to the introduction of vehicles they deemed to have an unfair advantage. Railroads, unlike trucking firms, must pay for the capital costs of their infrastructure. The railroads contend that large trucks do not pay sufficient taxes to compensate for the highway damage they cause and the environmental costs they generate. Although Congress apparently hoped it had placed a cap on maximum truck dimensions in 1991, such has not proven to be the case. Carriers operating under specific conditions have been able to seek and obtain special exceptions from the federal freeze by appealing directly to Congress (without any formal review of the possible consequences), thereby encouraging additional firms to seek similar exceptions. In the Transportation Equity Act for the 21st Century, Congress requested a TRB study to review federal policies on commercial vehicle dimensions. The committee that undertook the study that resulted in Special Report 267 found that regulatory analyses of the benefits and costs of changes in truck dimensions are hampered by a lack of information. Regulatory decisions on such matters will always entail a degree of risk and uncertainty, but the degree of uncertainty surrounding truck issues is uunusually high and unnecessary. The committee concluded that the uncertainty could be alleviated if procedures were established for carrying out a program oof basic and applied research, and if evaluation and monitoring were permanent components of the administration of trucking regulations. The committee recommended immediate changes in federal regulations that would allow for a federally supervised permit program. The program would permit the operation of vehicles heavier than would normally be allowed, provided that the changes applied only to vehicles with a maximum weight of 90,000 pounds, double trailer configurations with each trailer up to 33 feet, and an overall weight limit governed by the federal bridge formula. Moreover, enforcement of trucks operating under such a program should be strengthened, and the permits should require that users pay the costs they occasion. States should be free to choose whether to participate in the permit program. Those that elected to do so would be required to have in place a program of bridge management, safety monitoring, enforcement, and cost recovery, overseen by the federal government. The fundamental problem involved in evaluating proposals for changes in truck dimensions is that their effects can often only be estimated or modeled. The data available for estimating safety consequences in particular are inadequate and probably always will be. Thus, the committee that conducted this study concluded that the resulting analyses usually involve a high degree of uncertainty. What is needed is some way to evaluate potential changes through limited and carefully controlled trials, much as proposed new drugs are tested before being allowed in widespread use. The committee recommended that a new independent entity be created to work with private industry in evaluating new concepts and recommending changes to regulatory agencies. Limited pilot tests would be required, which would need to be carefully designed to avoid undue risks and ensure proper evaluation. Special vehicles could be allowed to operate under carefully controlled circumstances, just as oversize and overweight vehicles are allowed to operate under special permits in many states. Changes in federal laws and regulations would be required to allow states to issue such permits on an expanded network of highways, under the condition that a rigorous program of monitoring and evaluation be instituted.Special Report 269 Summary







Truck Weight Limits


Book Description

To help assess proposals for further changes in federal truck weight limits, Congress requested this study through Section 158 of the Surface Transportation and Uniform Relocation Assistance Act of 1987. To conduct the study, the National Research Council convened a special Transportation Research Board committee with experts in pavements, bridges, highway safety, freight transportation economics, motor vehicle design, highway administration, motor carrier operations, and enforcement of motor vehicle regulations. The study focused on four issues identified in the study request that involve potential changes to federal weight limits for Interstate highways: (1) Elimination of existing grandfather provisions; (2) Alternative methods for determining gross vehicle weight and axle loadings; (3) Adequacy of the current federal bridge formula; and (4) Treatment of specialized hauling vehicles--garbage trucks, dump trucks, and other trucks with short wheel bases that have difficulty complying with the current federal bridge formula. For each of these issues, the study committee estimated the nationwide effects of changes in federal limits proposed by the trucking industry, highway agencies, and other groups. Projections of heavy-truck miles by type of truck, region of the country, highway functional class, and operating weight were developed for a base case and alternative truck weight regulatory scenarios. These projections were then used to estimate impacts on truck costs, pavements, bridges, and safety.




Bridge Rating Practices and Policies for Overweight Vehicles


Book Description

TRB's National Cooperative Highway Research Program (NCHRP) Synthesis 359: Bridge Rating Practices and Policies for Overweight Vehicles explores overweight vehicle permit processes. The report includes information on state and provincial bridge rating systems, bridge evaluation practices, and permit policies as they relate to overweight and oversize vehicles. The report is designed to help in the understanding of the reasons for nonuniform permitting practices. The report reviews specifications, software types, treatment of nonstandard configurations, and allowance for in-place dead loads; processes of permit review; and personnel assigned to permit review.




Evaluation of Equipment, Methods, and Pavement Design Implications for Texas Conditions of the AASHTO 2002 Axle Load Spectra Traffic Methodology


Book Description

This interim report presents the findings of the literature review with particular emphasis on: (i) current regulations and trends on weights, lengths, and widths of commercial vehicles; and (ii) a review of state-of-the-art WIM technology. The report is complemented with a summary of the available WIM data in Texas to support Level 1 design in the M-E Design Guide.










Review of Canadian Experience with the Regulation of Large Commercial Motor Vehicles


Book Description

TRB's National Cooperative Highway Research Program (NCHRP) Report 671: Review of Canadian Experience with the Regulation of Large Commercial Motor Vehicles examines the process used in Canada to harmonize heavy truck size and weight regulations across the country. The report provides insights on how lessons learned from the Canadian experience might be applied in the United States.




Bridge Management


Book Description

This volume consists of papers presented at the First International Conference on Bridge Management, held at The University of Surrey, Guildford, UK, from 28-30 March 1990.