Evaluation of Continuously Reinforced Hydraulic Cement Concrete Pavement at Virginia's Smart Road


Book Description

A two-lane continuously reinforced concrete pavement was built in Blacksburg, Virginia, as a part of Virginia's Smart Road. One of the lanes is 12 ft wide, and the other is 14 ft wide. The additional 2 ft was part of the shoulder. Below the concrete pavement is a 3-in-thick open-graded drainage layer (OGDL); one section is asphalt stabilized, and the other section is cement stabilized. The concrete pavement was cured by a curing compound except that the 12-ft lane was also covered with plastic and straw because of concerns with cold ambient temperature. The objective of this project was to determine the material properties of the concrete, instrument the pavement, monitor construction practices, and monitor the performance of the pavement over 4 years. The concrete had high early strength, low permeability, and high shrinkage. The average crack spacing was more than 3 ft, indicating satisfactory performance. In general, cracks were wider when they were further apart, but the differences in crack spacing and width were variable and small in some cases and could not be correlated after 4 years. The end sections had less cracking than the interior sections of the pavement. There were fewer cracks and more space between cracks in the 12-ft lane and fewer cracks in the pavement over the asphalt-stabilized OGDL. This was attributed to a better cure in the 12-ft lane and to a lower friction over the asphalt-stabilized base. No changes to the specifications were recommended as a result of the study findings.




Virginia State Documents


Book Description




Pavement Surface Characteristics


Book Description

This report presents an overview of the major aspects of tire-pavement interaction as they relate to highway noise, safety and economics. The many sources of sound in the highway environment are described and the perception and measurement of noise are discussed. The measurement of roadway friction and the impact of pavement texture on highway safety are described. Techniques for controlling sound from the highway environment are also discussed, including the use of noise walls and barriers and the management of pavement surface characteristics. The noise, safety characteristics and cost-effectiveness of traditional and newer concrete pavement materials and surface textures, including turf drag, longitudinal tining, exposed aggregate, porous concrete, diamond grinding and others, are described and documented through summaries of studies from around the world. Techniques for balancing noise, safety, economics and other factors in the selection of pavement surface type and texture are also reviewed.




Eleventh International Conference on the Bearing Capacity of Roads, Railways and Airfields


Book Description

Innovations in Road, Railway and Airfield Bearing Capacity – Volume 1 comprises the first part of contributions to the 11th International Conference on Bearing Capacity of Roads, Railways and Airfields (2022). In anticipation of the event, it unveils state-of-the-art information and research on the latest policies, traffic loading measurements, in-situ measurements and condition surveys, functional testing, deflection measurement evaluation, structural performance prediction for pavements and tracks, new construction and rehabilitation design systems, frost affected areas, drainage and environmental effects, reinforcement, traditional and recycled materials, full scale testing and on case histories of road, railways and airfields. This edited work is intended for a global audience of road, railway and airfield engineers, researchers and consultants, as well as building and maintenance companies looking to further upgrade their practices in the field.




Non-Destructive Evaluation of Reinforced Concrete Structures: Deterioration Processes and Standard Test Methods


Book Description

This authoritative book provides a comprehensive review of the highly important subject of non-destructive evaluation of reinforced concrete structures. Engineers have a range of sophisticated techniques at their disposal to assess the condition of reinforced concrete structures that do not cause material damage and which usually enable the structure to be used while the surveys are carried out. Non-destructive evaluation of the infrastructure also plays a key role in calculating and prioritising where money should be spent on repair or replacement. Providing details of related techniques and case studies, this book offers an overview of how to plan and implement the NDT of reinforced concrete structures.




Eco-efficient Pavement Construction Materials


Book Description

Eco-efficient Pavement Construction Materials acquaints engineers with research findings on new eco-efficient pavement materials and how they can be incorporated into future pavements. Divided into three distinctive parts, the book emphasizes current research topics such as pavements with recycled waste, pavements for climate change mitigation, self-healing pavements, and pavements with energy harvesting potential. Part One considers techniques for recycling, Part Two reviews the contribution of pavements for climate change mitigation, including cool pavements, the development of new coatings for high albedo targets, and the design of pervious pavements. Finally, Part Three focuses on self-healing pavements, addressing novel materials and design and performance. Finally, the book discusses the case of pavements with energy harvesting potential, addressing different technologies on this field. - Offers a clear and concise lifecycle assessment of asphalt pavement recycling for greenhouse gas emission with temporal aspects - Applies key research trends to green the pavement industry - Includes techniques for recycling waste materials, the design of cool pavements, self-healing mechanisms, and key steps in energy harvesting




Transportation Systems Analysis and Assessment


Book Description

The transportation system is the backbone of any social and economic system, and is also a very complex system in which users, transport means, technologies, services, and infrastructures have to cooperate with each other to achieve common and unique goals.The aim of this book is to present a general overview on some of the main challenges that transportation planners and decision makers are faced with. The book addresses different topics that range from user's behavior to travel demand simulation, from supply chain to the railway infrastructure capacity, from traffic safety issues to Life Cycle Assessment, and to strategies to make the transportation system more sustainable.




Proceedings of the 5th International Symposium on Asphalt Pavements & Environment (APE)


Book Description

This volume highlights the latest advances, innovations, and applications in the field of asphalt pavement technology, as presented by leading international researchers and engineers at the 5th International Symposium on Asphalt Pavements & Environment (ISAP 2019 APE Symposium), held in Padua, Italy on September 11-13, 2019. It covers a diverse range of topics concerning materials and technologies for asphalt pavements, designed for sustainability and environmental compatibility: sustainable pavement materials, marginal materials for asphalt pavements, pavement structures, testing methods and performance, maintenance and management methods, urban heat island mitigation, energy harvesting, and Life Cycle Assessment. The contributions, which were selected by means of a rigorous international peer-review process, present a wealth of exciting ideas that will open novel research directions and foster multidisciplinary collaboration among different specialists.




Principles of Pavement Design


Book Description

Presents a complete coverage of all aspects of the theory and practice of pavement design including the latest concepts.




Pavement Engineering


Book Description

Pavement Engineering will cover the entire range of pavement construction, from soil preparation to structural design and life-cycle costing and analysis. It will link the concepts of mix and structural design, while also placing emphasis on pavement evaluation and rehabilitation techniques. State-of-the-art content will introduce the latest concepts and techniques, including ground-penetrating radar and seismic testing. This new edition will be fully updated, and add a new chapter on systems approaches to pavement engineering, with an emphasis on sustainability, as well as all new downloadable models and simulations.