Experimental Investigations on Particle Number Emissions from GDI Engines


Book Description

This thesis discusses experimental investigations to reduce particle number emissions from gasoline engines with direct injection. Measures on a single cylinder research engine with combined usage of a particle number measurement system, a particle size distribution measurement system as well as optical diagnostics and thermodynamic analysis enable an in-depth assessment of particle formation and oxidation. Therefore, numerous optical diagnostic techniques for spray visualisation (Mie-scattering, High-Speed PIV) and soot detection (High-Speed-Imaging, Fiber optical diagnostics) are deployed. Two injectors with different hydraulic flows but identical spray-targeting are characterised and compared by measurements in a pressurised chamber. The operation at higher engine load and low engine speed is in the focus of the experimental work at the engine test bench. Thereby, the low flow velocities in the combustion chamber, caused by the low engine speed, as well as the large amount of fuel injected are major challenges for the mixture formation process. A substantial part of the thesis thus focusses on the detailed analysis of the mixture formation process, which is consisting of fuel injection, interaction of the in-cylinder charge motion with the fuel injected and the fuel properties. Measures for the optimisation of the mixture formation process and the minimisation of the particle number emissions are analysed and evaluated. The charge motion is manipulated by the impression of a directed flow, the variation of the valve timings and valve open curve. The injection process is influenced by a reduction of the hydraulic flow of the injector and an increase of the injection pressure up to 50 MPa. The investigations show fundamental effects and potentials of different variation parameters concerning their emissions reduction potential at the exemplary operation at high engine load. Due to the simultaneous analysis of the in-cylinder charge motion and a thermodynamic analysis, the results can be transferred to different engines.




Reducing Particulate Emissions in Gasoline Engines


Book Description

For years, diesel engines have been the focus of particulate matter emission reductions. Now, however, modern diesel engines emit less particles than a comparable gasoline engine. This transformation necessitates an introduction of particulate reduction strategies for the gasoline-powered vehicle. Many strategies can be leveraged from diesel engines, but new combustion and engine control technologies will be needed to meet the latest gasoline regulations across the globe. Particulate reduction is a critical health concern in addition to the regulatory requirements. This is a vital issue with real-world implications. Reducing Particulate Emissions in Gasoline Engines encompasses the current strategies and technologies used to reduce particulates to meet regulatory requirements and curtail health hazards - reviewing principles and applications of these techniques. Highlights and features in the book include: Gasoline particulate filter design, function and applications Coated and uncoated three way catalyst design and integration Measurement of gasoline particulate matter emission, both laboratory and PEMS The goal is to provide a comprehensive assessment of gasoline particulate emission control to meet regulatory and health requirements - appealing to calibration, development and testing engineers alike.




Numerical and Experimental Studies on Combustion Engines and Vehicles


Book Description

The matters discussed and presented in the chapters of this book cover a wide spectrum of topics and research methods commonly used in the field of engine combustion technology and vehicle functional systems. This book contains the results of both computational analyses and experimental studies on jet and reciprocating combustion engines as well heavy-duty onroad vehicles. Special attention is devoted to research and measures toward preventing the emission of harmful exhaust components, reducing fuel consumption or using unconventional methods of engine fueling or using renewable and alternative fuels in different applications. Some technical improvements in design and control of vehicle systems are also presented.




Automotive Spark-Ignited Direct-Injection Gasoline Engines


Book Description

The process of fuel injection, spray atomization and vaporization, charge cooling, mixture preparation and the control of in-cylinder air motion are all being actively researched and this work is reviewed in detail and analyzed. The new technologies such as high-pressure, common-rail, gasoline injection systems and swirl-atomizing gasoline fuel injections are discussed in detail, as these technologies, along with computer control capabilities, have enabled the current new examination of an old objective; the direct-injection, stratified-charge (DISC), gasoline engine. The prior work on DISC engines that is relevant to current GDI engine development is also reviewed and discussed. The fuel economy and emission data for actual engine configurations have been obtained and assembled for all of the available GDI literature, and are reviewed and discussed in detail. The types of GDI engines are arranged in four classifications of decreasing complexity, and the advantages and disadvantages of each class are noted and explained. Emphasis is placed upon consensus trends and conclusions that are evident when taken as a whole; thus the GDI researcher is informed regarding the degree to which engine volumetric efficiency and compression ratio can be increased under optimized conditions, and as to the extent to which unburned hydrocarbon (UBHC), NOx and particulate emissions can be minimized for specific combustion strategies. The critical area of GDI fuel injector deposits and the associated effect on spray geometry and engine performance degradation are reviewed, and important system guidelines for minimizing deposition rates and deposit effects are presented. The capabilities and limitations of emission control techniques and after treatment hardware are reviewed in depth, and a compilation and discussion of areas of consensus on attaining European, Japanese and North American emission standards presented. All known research, prototype and production GDI engines worldwide are reviewed as to performance, emissions and fuel economy advantages, and for areas requiring further development. The engine schematics, control diagrams and specifications are compiled, and the emission control strategies are illustrated and discussed. The influence of lean-NOx catalysts on the development of late-injection, stratified-charge GDI engines is reviewed, and the relative merits of lean-burn, homogeneous, direct-injection engines as an option requiring less control complexity are analyzed.




Air Pollution and Control


Book Description

This book focuses on various aspects related to air pollution, including major sources of air pollution, measurement techniques, modeling studies and solution approaches to control. The book also presents case studies on measuring air pollution in major urban areas, such as Delhi, India. The book examines vehicles as a source of air pollution and addresses the quantitative analysis of engine exhaust emissions. Subsequent chapters discuss particulate matter from engines and coal-fired power plants as a major pollutant, as well as emission control techniques using various after treatment systems. The book’s final chapter considers future perspectives and a way forward for sustainable development. It also discusses several emission control techniques that will gain relevance in the future, when stricter emission norms will be enforced for international combustion (IC) engines as well as power plants. Given its breadth of coverage, the book will benefit a wide variety of readers, including researchers, professionals, and policymakers.




Engine Exhaust Particulates


Book Description

This book provides a comparative analysis of both diesel and gasoline engine particulates, and also of the emissions resulting from the use of alternative fuels. Written by respected experts, it offers comprehensive insights into motor vehicle particulates, their formation, composition, location, measurement, characterisation and toxicology. It also addresses exhaust-gas treatment and legal, measurement-related and technological advancements concerning emissions. The book will serve as a valuable resource for academic researchers and professional automotive engineers alike.




Petrodiesel Fuels


Book Description

This third volume of the handbook presents a representative sample of the population papers in the field of petrodiesel fuels. Following the substantial public concerns on the adverse impact of the emissions from petrodiesel fuels on the environment and human health, the research has intensified in the areas related to the reduction of these adverse effects. Thus, bioremediation of spills from crude oils and petrodiesel fuels at sea and soils as well as desulfurization of petrodiesel fuels have emerged as publicly important research areas. Similarly, the emissions from diesel fuel exhausts, due to their adverse effects on both human health and environment, have been researched more in recent years. These emissions cover particulate emissions, aerosol emissions, and NOx emissions. Research on the adverse impact of petrodiesel fuel exhaust emissions on human health has primarily progressed along the lines of respiratory illnesses, cancer, and other illnesses, such as cardiovascular illnesses, brain illnesses, and reproductive system illnesses, through human, animal, and in vitro studies. It is clear that these illnesses caused by the petrodiesel fuel exhaust emissions have been one of the most significant reasons to develop alternative biodiesel fuels. Part IX presents a representative sample of the population papers in the field of crude oils covering major research fronts. It covers crude oil spills in general, crude oil spills and their cleanup, properties and removal of crude oils, biodegradation of crude oil-contaminated soils, and crude oil recovery besides an overview paper. Part X presents a representative sample of the population papers in the field of petrodiesel fuels in general covering major research fronts. It covers combustion of biodiesel fuels in diesel engines, bioremediation of biodiesel fuel-contaminated soils, biodiesel power generation, and desulfurization of diesel fuels besides an overview paper. Part XI presents a representative sample of the population papers in the field of emissions from petrodiesel fuels covering major research fronts. It covers diesel emission mitigation, diesel particulate emissions, and diesel NOx emissions, besides an overview paper. Part XII presents a representative sample of the population papers in the field of the health impact of the emissions from petrodiesel fuels covering major research fronts. It covers respiratory illnesses, cancer, cardiovascular, brain, and reproductive system illnesses, besides an overview paper. This book will be useful to academics and professionals in the fields of Energy Fuels, Public Environmental Occupational Health, Pharmacology, Pharmacy, Immunology, Respiratory System, Allergy, and Oncology. Ozcan Konur is both a materials scientist and social scientist by training. He has published around 200 journal papers, book chapters, and conference papers. He has focused on the bioenergy and biofuels in recent years. In 2018, he edited Bioenergy and Biofuels, which brought together the work of over 30 experts in their respective field. He also edited the Handbook of Algal Science, Technology, and Medicine with a strong section on the algal biofuels in 2020.




Application of Intelligent Systems in Multi-modal Information Analytics


Book Description

This book presents the proceedings of the 2019 International Conference on Intelligent Systems Applications in Multi-modal Information Analytics, held in Shenyang, China on February 19-20, 2019. It provides comprehensive coverage of the latest advances and trends in information technology, science and engineering, addressing a number of broad themes, including data mining, multi-modal informatics, agent-based and multi-agent systems for health and education informatics, which inspire the development of intelligent information technologies. The contributions cover a wide range of topics: AI applications and innovations in health and education informatics; data and knowledge management; multi-modal application management; and web/social media mining for multi-modal informatics. Outlining promising future research directions, the book is a valuable resource for students, researchers and professionals, and provides a useful reference guide for newcomers to the field.




Proceedings of SAE-China Congress 2016: Selected Papers


Book Description

This proceedings volume gathers outstanding papers submitted to the 2016 SAE-China Congress, the majority of which are from China, the biggest car maker as well as most dynamic car market in the world. The book includes insights into the current challenges that the whole industry is currently facing, and it offers possible solutions to problems such as emission controls, environmental pollution, the energy shortage, traffic congestion and sustainable development. It also presents the latest technical achievements in the automotive industry. Many of the approaches it presents can help technicians to solve the practical problems that most affect their daily work.




Computational and Experimental Studies


Book Description

Comprising specially selected papers on the subject of Computational Methods and Experimental Measurements, this book includes research from scientists, researchers and specialists who perform experiments, develop computer codes and carry out measurements on prototypes. Improvements relating to computational methods have generated an ever-increasing expansion of computational simulations that permeate all fields of science and technology. Validating the results of these improvements can be achieved by carrying out committed and accurate experiments, which have undertaken continuous development. Current experimental techniques have become more complex and sophisticated so that they require the intensive use of computers, both for running experiments as well as acquiring and processing the resulting data. This title explores new experimental and computational methods and covers various topics such as: Computer-aided Models; Image Analysis Applications; Noise Filtration of Shockwave Propagation; Finite Element Simulations.