Author : Cliff Ruggles
Publisher : CarTech Inc
Page : 130 pages
File Size : 19,80 MB
Release : 2008
Category : Transportation
ISBN : 1932494502
Vehicle maintenance.
Author : Cliff Ruggles
Publisher : CarTech Inc
Page : 145 pages
File Size : 49,49 MB
Release : 2015-07-15
Category : Transportation
ISBN : 1613251890
Although not quite the stout heavy-duty performer as its big brother, the Turbo 400, the Turbo 350 transmission is a fine, durable, capable, and when modified, stout performer in its own right. Millions of GM cars and trucks have been built with Turbo 350 automatic transmissions. There always comes a time when the old transmission shows signs of wear. At some point, even the best transmissions need to be rebuilt. In GM Turbo 350 Transmissions: How to Rebuild & Modify, respected automotive technical author Cliff Ruggles guides you through the complex rebuild procedure of GM’s popular rear-wheel-drive automatic transmission. With his proven style, Ruggles goes through the step-by-step rebuild and performance upgrade procedures in a series of full-color photos. He includes instruction on removal and installation, tear-down procedures, parts inspection and replacement, as well as performance mods and shift kit installation. Time-saving tips are part of every buildup as well. Automatic transmissions are a mystery to most. Even if you end up deciding to have a professional take care of your transmission repair and performance needs, the information contained in this book is crucial to understanding how the power gets from the engine to the road. Add a copy of GM Turbo 350: How to Rebuild & Modify to your automotive library today.
Author : Cliff Ruggles
Publisher : CarTech Inc
Page : 130 pages
File Size : 15,68 MB
Release : 2006
Category : Technology & Engineering
ISBN : 1932494189
The Rochester Quadrajet carburetor was found perched atop the engine of many a classic GM performance vehicle. The Q-Jet is a very capable but often misunderstood carb. This book, How to Rebuild and Modify Rochester Quadrajet Carburetors, seeks to lift the veil of mystery surrounding the Q-Jet and show owners how to tune and modify their carbs for maximum performance. The book will be a complete guide to selecting, rebuilding, and modifying the Q-Jet, aimed at both muscle car restorers and racers. The book includes a history of the Q-Jet, an explanation of how the carb works, a guide to selecting and finding the right carb, instructions on how to rebuild the carb, and extensive descriptions of high-performance modifications that will help anyone with a Q-Jet carb crush the competition.
Author : Joseph Potak
Publisher : Quarto Publishing Group USA
Page : 193 pages
File Size : 29,91 MB
Release : 2011-05-15
Category : Transportation
ISBN : 1610602005
In this illustrated guide, an LS-series expert takes you step-by-step through the process of installing GM’s high-power engines in any automobile. First underhood in the 1997 Corvette, GM’s LS engines have proven powerful, reliable, and amazingly fuel efficient. Since that time, more than a dozen variants have been produced, ranging from bulletproof, iron-block 4.8-liter workhorses to the supercharged 7.0-liter LS7. Among performance enthusiasts, these remarkable V-8 engines have become a favorite for engine swaps, owing to their fantastic power, compact design, and modification possibilities. In GM LS-Series Engines: The Complete Swap Manual, professional LS-series engine specialist and technician Joseph Potak details all the considerations involved in performing this swap into any vehicle. With clear instructions, color photos, diagrams, and specification tables, Potak guides you through: Mounting your new engine Configuring the EFI system Designing fuel and exhaust systems Sourcing the correct accessories for your application Transmission, torque converters, and clutches Performance upgrades and power-adders Troubleshooting, should problems arise
Author : Gary Weldon
Publisher : CarTech Inc
Page : 145 pages
File Size : 31,56 MB
Release : 2020-10-15
Category : Transportation
ISBN : 1613255586
Learn how to rebuild and upgrade your Buick Nailhead with the first book ever dedicated to the subject! In this all-new book from Nailhead racer and veteran engine builder Gary Weldon, you will learn everything you need to know about how to rebuild and upgrade the venerable Buick Nailhead engine. Weldon takes you through each step, including a review of the birth of the Nailhead, the benefits of its unique design, serial and casting number information to source and identify the best project, and a history of the engine in development. Also covered are the processes of rebuilding, including disassembly, inspection, sourcing the best parts, making critical upgrades, reassembly, and break-in. Of course, all the machine shop work is covered, and practical advice on building engines for competition is provided. The Nailhead was a throwback to the early overhead-valve engine design, and that unique design makes it a popular choice for period-correct hot rod projects. In addition, if your torquey Nailhead resides between the fenders of a Buick Special, LeSabre, Invicta, Roadmaster, Riviera, Century, Skylark, Wildcat, or Electra 225, this book will help you keep that old beauty on the road.
Author : John Baechtel
Publisher : S-A Design
Page : 0 pages
File Size : 49,77 MB
Release : 1997
Category : Chevrolet automobile
ISBN : 9781884089121
Retrofitting a TPI system to an older engine isn't exactly rocket science, but it does require a good deal of knowledge not only of basic induction systems, but also computerized controls and circuitry. This info-packed manual takes you step-by-step through the fuel injection system and the retrofitting of a TPI system to a typical Chevy small block motor.
Author : David Vizard
Publisher : CarTech Inc
Page : 162 pages
File Size : 25,92 MB
Release : 2009
Category : Technology & Engineering
ISBN : 1932494847
Renowned engine builder and technical writer David Vizard turns his attention to extracting serious horsepower from small-block Chevy engines while doing it on a budget. Included are details of the desirable factory part numbers, easy do-it-yourself cylinder head modifications, inexpensive but effective aftermarket parts, the best blocks, rotating assembly (cranks, rods, and pistons), camshaft selection, lubrication, induction, ignition, exhaust systems, and more.
Author : George Reid
Publisher : CarTech Inc
Page : 147 pages
File Size : 10,27 MB
Release : 2014-06-16
Category : Transportation
ISBN : 1613251149
While millions of Ford rear-wheel-drive cars are equipped with the durable and simple C4 and C6 transmissions of the 1960s, early in the 1980s Ford replaced those old designs with the AOD transmission for a new generation of cars. Overdrive gears, once popular before WWII, were now becoming popular again, as manufacturers were under increasing pressure to raise fuel economy to meet ever more demanding EPA standards. A nice byproduct of that was more comfortable cruising speeds, where your engine didn't have to work so hard in addition to getting better fuel economy. In Ford AOD Transmissions: Rebuilding and Modifying the AOD, AODE and 4R70W, author George Reid walks you through the process step-by-step, from removing the transmission from the vehicle, to complete disassembly and cleaning, to careful reassembly, to proper re-installation and road testing. Performance modifications are also covered, as well as an ID guide for various model numbers, evolutionary design changes, shift kit installation, and torque converter selection. This book is ideal for people who already have one of these transmissions in their car, as well as enthusiasts who would like to swap one of these more modern units into an older chassis to get all the benefits of overdrive. If you plan on researching or working on any one of these overdrive models, this book is a vital addition to your workbench or library.
Author : Jefferson Bryant
Publisher : CarTech Inc
Page : 146 pages
File Size : 25,44 MB
Release : 2014-04-10
Category : Transportation
ISBN : 1613250932
Introduced in 1997, the GM LS engine has become the dominant V-8 engine in GM vehicles and a top-selling high-performance crate engine. GM has released a wide range of Gen III and IV LS engines that deliver spectacular efficiency and performance. These compact, lightweight, cutting-edge pushrod V-8 engines have become affordable and readily obtainable from a variety of sources. In the process, the LS engine has become the most popular V-8 engine to swap into many American and foreign muscle cars, sports cars, trucks, and passenger cars. To select the best engine for an LS engine swap, you need to carefully consider the application. Veteran author and LS engine swap master Jefferson Bryant reveals all the criteria to consider when choosing an LS engine for a swap project. You are guided through selecting or fabricating motor mounts for the project. Positioning the LS engine in the engine compartment and packaging its equipment is a crucial part of the swap process, which is comprehensively covered. As part of the installation, you need to choose a transmission crossmember that fits the engine and vehicle as well as selecting an oil pan that has the correct profile for the crossmember with adequate ground clearance. Often the brake booster, steering shaft, accessory pulleys, and the exhaust system present clearance challenges, so this book offers you the best options and solutions. In addition, adapting the computer-control system to the wiring harness and vehicle is a crucial aspect for completing the installation, which is thoroughly detailed. As an all-new edition of the original top-selling title, LS Swaps: How to Swap GM LS Engines into Almost Anything covers the right way to do a spectrum of swaps. So, pick up this guide, select your ride, and get started on your next exciting project.
Author : Joseph Potak
Publisher : Motorbooks
Page : 176 pages
File Size : 40,49 MB
Release : 2009-10-01
Category : Transportation
ISBN : 1616730935
For gearheads who want to build or modify popular LS engines, How to Build and Modify GM LS-Series Engines provides the most detailed and extensive instructions ever offered for those modding LS engines through the Gen IV models. The LS1 engine shook the performance world when introduced in the 1997 Corvette. Today the LS9 version far eclipses even the mightiest big-blocks from the muscle car era, and it does so while meeting modern emissions requirements and delivering respectable fuel economy. Premier LS engine technician Joseph Potak addresses every question that might come up: Block selection and modifications Crankshaft and piston assemblies Cylinder heads, camshafts, and valvetrain Intake manifolds and fuel system Header selection Setting up ring and bearing clearances for specific uses Potak also guides readers through forced induction and nitrous oxide applications. In addition, the book is fully illustrated with color photography and detailed captions to further guide readers through the mods described, from initial steps to final assembly. Whatever the reader’s performance goals,How to Build and Modify GM LS-Series Engines will guide readers through the necessary modifications and how to make them. It’s the ultimate resource for building the ultimate LS-series engine! The Motorbooks Workshop series covers topics that engage and interest car and motorcycle enthusiasts. Written by subject-matter experts and illustrated with step-by-step and how-it’s-done reference images, Motorbooks Workshop is the ultimate resource for how-to know-how.
