Helicopter Blade-Vortex Interaction Noise with Comparisons to Cfd Calculations


Book Description

A comparison of experimental acoustics data and computational predictions was performed for a helicopter rotor blade interacting with a parallel vortex. The experiment was designed to examine the aerodynamics and acoustics of parallel Blade-Vortex Interaction (BVI) and was performed in the Ames Research Center (ARC) 80- by 120-Foot Subsonic Wind Tunnel. An independently generated vortex interacted with a small-scale, nonlifting helicopter rotor at the 180 deg azimuth angle to create the interaction in a controlled environment. Computational Fluid Dynamics (CFD) was used to calculate near-field pressure time histories. The CFD code, called Transonic Unsteady Rotor Navier-Stokes (TURNS), was used to make comparisons with the acoustic pressure measurement at two microphone locations and several test conditions. The test conditions examined included hover tip Mach numbers of 0.6 and 0.7, advance ratio of 0.2, positive and negative vortex rotation, and the vortex passing above and below the rotor blade by 0.25 rotor chords. The results show that the CFD qualitatively predicts the acoustic characteristics very well, but quantitatively overpredicts the peak-to-peak sound pressure level by 15 percent in most cases. There also exists a discrepancy in the phasing (about 4 deg) of the BVI event in some cases. Additional calculations were performed to examine the effects of vortex strength, thickness, time accuracy, and directionality. This study validates the TURNS code for prediction of near-field acoustic pressures of controlled parallel BVI. McCluer, Megan S. Ames Research Center...







Computational Fluid Dynamics 2000


Book Description

These proceedings contain a selection of refereed contributions as a source of reference for all those interested in the state of the art in computational fluid dynamics. The conference brings together physicists, mathematicians and engineers to review and share recent advances in the field.




Parallel Computational Fluid Dynamics '99


Book Description

Contributed presentations were given by over 50 researchers representing the state of parallel CFD art and architecture from Asia, Europe, and North America. Major developments at the 1999 meeting were: (1) the effective use of as many as 2048 processors in implicit computations in CFD, (2) the acceptance that parallelism is now the 'easy part' of large-scale CFD compared to the difficulty of getting good per-node performance on the latest fast-clocked commodity processors with cache-based memory systems, (3) favorable prospects for Lattice-Boltzmann computations in CFD (especially for problems that Eulerian and even Lagrangian techniques do not handle well, such as two-phase flows and flows with exceedingly multiple-connected demains with a lot of holes in them, but even for conventional flows already handled well with the continuum-based approaches of PDEs), and (4) the nascent integration of optimization and very large-scale CFD. Further details of Parallel CFD'99, as well as other conferences in this series, are available at http://www.parcfd.org







AIAA Journal


Book Description




Rotorcraft Aeromechanics


Book Description

A rotorcraft is a class of aircraft that uses large-diameter rotating wings to accomplish efficient vertical take-off and landing. The class encompasses helicopters of numerous configurations (single main rotor and tail rotor, tandem rotors, coaxial rotors), tilting proprotor aircraft, compound helicopters, and many other innovative configuration concepts. Aeromechanics covers much of what the rotorcraft engineer needs: performance, loads, vibration, stability, flight dynamics, and noise. These topics include many of the key performance attributes and the often-encountered problems in rotorcraft designs. This comprehensive book presents, in depth, what engineers need to know about modelling rotorcraft aeromechanics. The focus is on analysis, and calculated results are presented to illustrate analysis characteristics and rotor behaviour. The first third of the book is an introduction to rotorcraft aerodynamics, blade motion, and performance. The remainder of the book covers advanced topics in rotary wing aerodynamics and dynamics.







Aeroacoustics of Low Mach Number Flows


Book Description

Aeroacoustics of Low Mach Number Flows: Fundamentals, Analysis and Measurement, Second Edition provides a detailed introduction to sound radiation from subsonic flow over moving surfaces. This phenomenon is the most widespread cause of flow noise in engineering systems, including fan noise, rotor noise, wind turbine noise, boundary layer noise, airframe noise and aircraft noise. This fully updated new edition includes additional problems, illustrations and summary materials to support readers. New content covers Rapid Distortion theory (RDT), boundary layer wall pressure fluctuations, and flow induced sound at surfaces. Themes addressing non-compressible flows have also been added, offering coverage of hydroacoustic as well as aeroacoustic applications. New support materials for this edition include course outlines, problem sets, sample MATLAB codes and experimental data to be found at www.aeroacoustics.net. - Addresses, in detail, sound from rotating blades, ducted fans, airframes, boundary layers, and more - Presents theory in such a way that it can be used in computational methods and calculating sound levels - Includes coverage of different experimental approaches to this subject




New Results in Numerical and Experimental Fluid Mechanics IX


Book Description

This book presents contributions to the 18th biannual symposium of the German Aerospace Aerodynamics Association (STAB). The individual chapters reflect ongoing research conducted by the STAB members in the field of numerical and experimental fluid mechanics and aerodynamics, mainly for (but not limited to) aerospace applications, and cover both nationally and EC-funded projects. By addressing a number of essential research subjects, together with their related physical and mathematics fundamentals, the book provides readers with a comprehensive overview of the current research work in the field, as well as its main challenges and new directions. Current work on e.g. high aspect-ratio and low aspect-ratio wings, bluff bodies, laminar flow control and transition, active flow control, hypersonic flows, aeroelasticity, aeroacoustics and biofluid mechanics is exhaustively discussed here.