IEEE Recommended Practice for Powering and Grounding Electronic Equipment
Author :
Publisher :
Page : pages
File Size : 32,39 MB
Release : 2006
Category :
ISBN :
IEEE Recommended Practice for Grounding of Industrial and Commercial Power Systems
Author : IEEE Industry Applications Society. Power Systems Engineering Committee
Publisher : Inst of Elect & Electronic
Page : 234 pages
File Size : 38,47 MB
Release : 1992
Category : Electric currants
ISBN : 9781559371414
Book Description
The problems of system grounding, that is, connection to ground of neutral, of the corner of the delta, or of the midtap of one phase, are covered. The advantages and disadvantages of grounded versus ungrounded systems are discussed. Information is given on how to ground the system, where the system should be grounded, and how to select equipment for the grounding of the neutral circuits. Connecting the frames and enclosures of electric apparatus, such as motors, switchgear, transformers, buses, cables conduits, building frames, and portable equipment, to a ground system is addressed. The fundamentals of making the interconnection or ground-conductor system between electric equipment and the ground rods, water pipes, etc. are outlined. The problems of static electricity(how it is generated, what processes may produce it, how it is measured, and what should be done to prevent its generation or to drain the static charges to earth to prevent sparking(are treated. Methods of protecting structures against the effects of lightning are also covered. Obtaining a low-resistance connection to the earth, use of ground rods, connections to water pipes, etc, are discussed. A separate chapter on sensitive electronic equipment is included.
IEEE Recommended Practice for Electric Power Distribution for Industrial Plants
Author : Institute of Electrical and Electronics Engineers
Publisher : Institute of Electrical & Electronics Engineers(IEEE)
Page : 776 pages
File Size : 21,93 MB
Release : 1994
Category : House & Home
ISBN :
Book Description
A thorough analysis of basic electrical-systems considerations is presented. Guidance is provided in design, construction, and continuity of an overall system to achieve safety of life and preservation of property; reliability; simplicity of operation; voltage regulation in the utilization of equipment within the tolerance limits under all load conditions; care and maintenance; and flexibility to permit development and expansion. Recommendations are made regarding system planning; voltage considerations; surge voltage protection; system protective devices; fault calculations; grounding; power switching, transformation, and motor-control apparatus; instruments and meters; cable systems; busways; electrical energy conservation; and cost estimation.
IEEE Recommended Practice for Calculating Short-Circuit Currents in Industrial and Commercial Power Systems
Author :
Publisher : Institute of Electrical & Electronics Engineers(IEEE)
Page : 300 pages
File Size : 19,10 MB
Release : 2006-01-01
Category : Electric power-plants
ISBN : 9780738149325
Book Description
This recommended practice provides short-circuit current information including calculated short-circuit current duties for the application in industrial plants and commercial buildings, at all power system voltages, of power system equipment that senses, carries, or interrupts short-circuit currents.
Renewable and Efficient Electric Power Systems
Author : Gilbert M. Masters
Publisher : John Wiley & Sons
Page : 676 pages
File Size : 48,77 MB
Release : 2005-01-03
Category : Technology & Engineering
ISBN : 0471668834
Book Description
This is a comprehensive textbook for the new trend of distributed power generation systems and renewable energy sources in electric power systems. It covers the complete range of topics from fundamental concepts to major technologies as well as advanced topics for power consumers. An Instructor's Manual presenting detailed solutions to all the problems in the book is available from the Wiley editorial department -- to obtain the manual, send an email to [email protected]
IEEE Recommended Practice for the Design of Reliable Industrial and Commercial Power Systems
Author :
Publisher :
Page : pages
File Size : 15,80 MB
Release : 2007
Category :
ISBN :
Book Description
IEEE Conference Record of ... Annual Conference of Electrical Engineering Problems in the Rubber and Plastics Industries
Author :
Publisher :
Page : 128 pages
File Size : 49,50 MB
Release : 1977
Category : Rubber industry and trade
ISBN :
Book Description
Energy Efficiency in Motor Driven Systems
Author : Francesco Parasiliti
Publisher : Springer Science & Business Media
Page : 579 pages
File Size : 32,6 MB
Release : 2012-12-06
Category : Business & Economics
ISBN : 364255475X
Book Description
This book reports the state of the art of energy-efficient electrical motor driven system technologies, which can be used now and in the near future to achieve significant and cost-effective energy savings. It includes the recent developments in advanced electrical motor end-use devices (pumps, fans and compressors) by some of the largest manufacturers. Policies and programs to promote the large scale penetration of energy-efficient technologies and the market transformation are featured in the book, describing the experiences carried out in different parts of the world. This extensive coverage includes contributions from relevant institutions in the Europe, North America, Latin America, Africa, Asia, Australia and New Zealand.
IEEE Recommended Practice for Powering and Grounding Sensitive Electronic Equipment
Author : Institute of Electrical and Electronics Engineers
Publisher : Inst of Elect & Electronic
Page : 255 pages
File Size : 25,54 MB
Release : 1992
Category : Electric currents
ISBN : 9781559372312
Book Description
Multiphysics Simulation by Design for Electrical Machines, Power Electronics and Drives
Author : Marius Rosu
Publisher : John Wiley & Sons
Page : 312 pages
File Size : 26,92 MB
Release : 2017-12-18
Category : Science
ISBN : 1119103444
Book Description
Presents applied theory and advanced simulation techniques for electric machines and drives This book combines the knowledge of experts from both academia and the software industry to present theories of multiphysics simulation by design for electrical machines, power electronics, and drives. The comprehensive design approach described within supports new applications required by technologies sustaining high drive efficiency. The highlighted framework considers the electric machine at the heart of the entire electric drive. The book also emphasizes the simulation by design concept—a concept that frames the entire highlighted design methodology, which is described and illustrated by various advanced simulation technologies. Multiphysics Simulation by Design for Electrical Machines, Power Electronics and Drives begins with the basics of electrical machine design and manufacturing tolerances. It also discusses fundamental aspects of the state of the art design process and includes examples from industrial practice. It explains FEM-based analysis techniques for electrical machine design—providing details on how it can be employed in ANSYS Maxwell software. In addition, the book covers advanced magnetic material modeling capabilities employed in numerical computation; thermal analysis; automated optimization for electric machines; and power electronics and drive systems. This valuable resource: Delivers the multi-physics know-how based on practical electric machine design methodologies Provides an extensive overview of electric machine design optimization and its integration with power electronics and drives Incorporates case studies from industrial practice and research and development projects Multiphysics Simulation by Design for Electrical Machines, Power Electronics and Drives is an incredibly helpful book for design engineers, application and system engineers, and technical professionals. It will also benefit graduate engineering students with a strong interest in electric machines and drives.
