The IEEE Standard Dictionary of Electrical and Electronics Terms


Book Description

Früher u.d.T.: Institute of Electrical and Electronics Engineers: The new IEEE standard dictionary of electrical and electronics terms.







Power Grid Resiliency for Adverse Conditions


Book Description

Written by a leading expert in the field, this practical book offers a comprehensive understanding of the impact of extreme weather and the possible effects of climate change on the power grid. The impact and restoration of floods, winter storms, wind storms, and hurricanes as well as the effects of heat waves and dry spells on thermal power plants is explained in detail. This book explores proven practices for successful restoration of the power grid, increased system resiliency, and ride-through after extreme weather and provides readers with examples from super storm Sandy. This book presents the effects of lack of ground moisture on transmission line performance and gives an overview of line insulation coordination, stress-strength analysis, and tower insulation strength, and then provides readers with tangible solutions. Structural hardening of power systems against storms, including wind pressure, wood poles, and vegetation management is covered. Moreover, this book provides suggestions for practical implementations to improve future smart grid resiliency.




Real-Time Simulation Technologies: Principles, Methodologies, and Applications


Book Description

Real-Time Simulation Technologies: Principles, Methodologies, and Applications is an edited compilation of work that explores fundamental concepts and basic techniques of real-time simulation for complex and diverse systems across a broad spectrum. Useful for both new entrants and experienced experts in the field, this book integrates coverage of detailed theory, acclaimed methodological approaches, entrenched technologies, and high-value applications of real-time simulation—all from the unique perspectives of renowned international contributors. Because it offers an accurate and otherwise unattainable assessment of how a system will behave over a particular time frame, real-time simulation is increasingly critical to the optimization of dynamic processes and adaptive systems in a variety of enterprises. These range in scope from the maintenance of the national power grid, to space exploration, to the development of virtual reality programs and cyber-physical systems. This book outlines how, for these and other undertakings, engineers must assimilate real-time data with computational tools for rapid decision making under uncertainty. Clarifying the central concepts behind real-time simulation tools and techniques, this one-of-a-kind resource: Discusses the state of the art, important challenges, and high-impact developments in simulation technologies Provides a basis for the study of real-time simulation as a fundamental and foundational technology Helps readers develop and refine principles that are applicable across a wide variety of application domains As science moves toward more advanced technologies, unconventional design approaches, and unproven regions of the design space, simulation tools are increasingly critical to successful design and operation of technical systems in a growing number of application domains. This must-have resource presents detailed coverage of real-time simulation for system design, parallel and distributed simulations, industry tools, and a large set of applications.




Transportation Systems and Engineering: Concepts, Methodologies, Tools, and Applications


Book Description

From driverless cars to vehicular networks, recent technological advances are being employed to increase road safety and improve driver satisfaction. As with any newly developed technology, researchers must take care to address all concerns, limitations, and dangers before widespread public adoption. Transportation Systems and Engineering: Concepts, Methodologies, Tools, and Applications addresses current trends in transportation technologies, such as smart cars, green technologies, and infrastructure development. This multivolume book is a critical reference source for engineers, computer scientists, transportation authorities, students, and practitioners in the field of transportation systems management.




Third-Generation Systems and Intelligent Wireless Networking


Book Description

Of Non-Wraparound Network Performance -- Wrap-around Network Performance Results -- Performance Results over a LOS Channel -- Performance Results over a Multipath Channel -- Performance over a Multipath Channel using Power Control -- Performance of an AQAM based Network using Power Control -- UTRA, Adaptive Arrays and Adaptive Modulation -- Direct Sequence Code Division Multiple Access -- UMTS Terrestrial Radio Access -- Spreading and Modulation -- Common Pilot Channel -- Power Control -- Uplink Power Control -- Downlink Power Control -- Soft Handover -- Signal-to-Interference plus Noise Ratio Calculations -- Downlink -- Uplink -- Multi-User Detection -- Simulation Results -- Simulation Parameters -- The Effect of Pilot Power on Soft Handover Results -- Fixed Received Pilot Power Thresholds without Shadowing -- Fixed Received Pilot Power Thresholds with 0.5 Hz Shadowing -- Fixed Received Pilot Power Thresholds with 1.0 Hz Shadowing -- Relative Received Pilot Power Thresholds without Shadowing -- Relative Received Pilot Power Thresholds with 0.5 Hz Shadowing -- Relative Received Pilot Power Thresholds with 1.0 Hz Shadowing -- E[subscript c]/I[subscript o] Power Based Soft Handover Results -- Fixed E[subscript c]/I[subscript o] Thresholds without Shadowing -- Fixed E[subscript c]/I[subscript o] Thresholds with 0.5 Hz Shadowing -- Fixed E[subscript c]/I[subscript o] Thresholds with 1.0 Hz Shadowing -- Relative E[subscript c]/I[subscript o] Thresholds without Shadowing.




Document and Image Compression


Book Description

Although it's true that image compression research is a mature field, continued improvements in computing power and image representation tools keep the field spry. Faster processors enable previously intractable compression algorithms and schemes, and certainly the demand for highly portable high-quality images will not abate. Document and Image Compression highlights the current state of the field along with the most probable and promising future research directions for image coding. Organized into three broad sections, the book examines the currently available techniques, future directions, and techniques for specific classes of images. It begins with an introduction to multiresolution image representation, advanced coding and modeling techniques, and the basics of perceptual image coding. This leads to discussions of the JPEG 2000 and JPEG-LS standards, lossless coding, and fractal image compression. New directions are highlighted that involve image coding and representation paradigms beyond the wavelet-based framework, the use of redundant dictionaries, the distributed source coding paradigm, and novel data-hiding techniques. The book concludes with techniques developed for classes of images where the general-purpose algorithms fail, such as for binary images and shapes, compound documents, remote sensing images, medical images, and VLSI layout image data. Contributed by international experts, Document and Image Compression gathers the latest and most important developments in image coding into a single, convenient, and authoritative source.




Innovative Technologies for Dependable OTS-Based Critical Systems


Book Description

The demand for large-scale dependable, systems, such as Air Traffic Management, industrial plants and space systems, is attracting efforts of many word-leading European companies and SMEs in the area, and is expected to increase in the near future. The adoption of Off-The-Shelf (OTS) items plays a key role in such a scenario. OTS items allow mastering complexity and reducing costs and time-to-market; however, achieving these goals by ensuring dependability requirements at the same time is challenging. CRITICAL STEP project establishes a strategic collaboration between academic and industrial partners, and proposes a framework to support the development of dependable, OTS-based, critical systems. The book introduces methods and tools adopted by the critical systems industry, and surveys key achievements of the CRITICAL STEP project along four directions: fault injection tools, V&V of critical systems, runtime monitoring and evaluation techniques, and security assessment.




Power Quality in Power Systems and Electrical Machines


Book Description

Power Quality in Power Systems and Electrical Machines, Second Edition helps readers understand the causes and effects of power quality problems and provides techniques to mitigate these problems. Power quality is a measure of deviations in supply systems and their components, and affects all connected electrical and electronic equipment, including computers, TV monitors, and lighting. In this book analytical and measuring techniques are applied to power quality problems as they occur in central power stations and distributed generation such as alternative power systems. Provides theoretical and practical insight into power quality problems; most books available are either geared to theory or practice only Problems and solutions at the end of each chapter dealing with practical applications Includes application examples implemented in SPICE, Mathematica, and MATLAB




Index to IEEE Publications


Book Description

Issues for 1973- cover the entire IEEE technical literature.