Long-Term Effects of Disinfection Changes on Water Quality


Book Description

In response to many U.S. water utilities that are considering changing disinfectants from chlorine to alternative disinfectants, this research has been undertaken to gain knowledge of long-term effects.










Drinking Water Distribution Systems


Book Description

Protecting and maintaining water distributions systems is crucial to ensuring high quality drinking water. Distribution systems-consisting of pipes, pumps, valves, storage tanks, reservoirs, meters, fittings, and other hydraulic appurtenances-carry drinking water from a centralized treatment plant or well supplies to consumers' taps. Spanning almost 1 million miles in the United States, distribution systems represent the vast majority of physical infrastructure for water supplies, and thus constitute the primary management challenge from both an operational and public health standpoint. Recent data on waterborne disease outbreaks suggest that distribution systems remain a source of contamination that has yet to be fully addressed. This report evaluates approaches for risk characterization and recent data, and it identifies a variety of strategies that could be considered to reduce the risks posed by water-quality deteriorating events in distribution systems. Particular attention is given to backflow events via cross connections, the potential for contamination of the distribution system during construction and repair activities, maintenance of storage facilities, and the role of premise plumbing in public health risk. The report also identifies advances in detection, monitoring and modeling, analytical methods, and research and development opportunities that will enable the water supply industry to further reduce risks associated with drinking water distribution systems.




Influence of Biofilm on Disinfection Byproducts Formation and Decay in a Simulated Water Distribution System


Book Description

Since biofilm has been implicated in the deterioration water quality and the increase of public health risks, various efforts have been made to minimize biofilm regrowth in drinking water distribution systems. Although traditional water treatment processes can greatly remove a large fraction of disinfection by-products (DBPs) precursors, a small portion of natural organic matter (NOM) may still enter water distribution systems. Untreated NOM can serve as nutrients for biofilm growth while also consuming maintained disinfection residuals, which can result in microbial contamination in drinking water. To suppress biofilm formation, water utilities maintain disinfectant residuals for the distribution system. However, upon disinfectant addition, toxic DBPs are inevitably produced. Biofilm and its secreted extracellular polymeric substances (EPS) produce toxic DBPs, due to the very similar chemical composition compared to traditional investigated DBP precursors. This research investigated the role of biofilm on DBP formation and decay in simulated drinking water distribution systems with four objectives. The first objective was to investigate the influence of chemical composition and quantity of bacterial EPS on the biosorption of NOM in drinking water. Results indicated that both protein and polysaccharide based EPS adsorbed existing NOM. Biosorption capacity was mainly determined by divalent ion (Ca2+ and Mg2+) concentrations. Mechanistically, the presence of a diffuse electrical double layer inhibited NOM biosorption by potential energy barriers, however, presence of divalent ions in the aquatic environment enhanced biosorption processes, permitting functional group interactions between EPS and NOM. In addition, hydrophobic interactions, EPS characteristics and quantity can also be used to explain biosorption results. Bridging between hydrophilic carboxyl groups on alginate EPS and NOM appeared to be the dominant form of biosorption, while hydrophobic interactions enhanced biosorption for protein-based EPS. The second and third objectives of this study were to investigate the role of biofilm EPS on the formation of both carbonaceous DBPs (C-DBPs) and nitrogenous DBPs (N-DBPs). DBP yield (formation potential) tests of both bacterial culture and extracted EPS indicated that the chemical composition and quality of EPS played a critical role for DBP formation. In general, protein based EPS possessed higher DBP yields compared to polysaccharide based EPS, especially for N-DBPs. To further determine the relative contribution of each biomolecule in EPS to DBP formation and speciation, detailed chemical compositions of biomolecules in EPS (amino acids, polysaccharide monomers, and fatty acids) from both pure culture and mixed species biofilm isolated from a water utility were analyzed. DBP yield results from both extracted EPS and EPS surrogates (amino acids and polysaccharide monomers) indicated that proteins in EPS have a greater impact on DBP formation, where amino acids containing unsaturated organic carbon or conjugated bonds in R-group produced higher amount of DBPs. However, DBP yields of polysaccharide monomers were lower than those of tested amino acids groups and the DBP yields were not significantly influenced by their chemical structures. The last objective of this study was to understand the influence of biofilm on DBP formation and decay in a simulated water distribution system using lab scale annular reactors. For Cl2 disinfection at 0.5 mg L-1 Cl2 residual concentration, no obvious DBP formation was observed. This was mainly due to the combination of low DBP formation, DBP volatilization, and biodegradation. However, when high Cl2 residuals were maintained, the formations of both C-DBPs and N-DBPs increased dramatically beyond the DBP formation potential of the feed solution. This suggests higher Cl2 residual not only reacted with humic acid (HA) in feed solution but also reacted with biofilm and produced extra DBPs, especially the high formation of N-DBPs (haloacetonitriles). For NH2Cl disinfection, the DBP levels were much lower than those of Cl2 disinfection and differences in DBP formation were not significant under different NH2Cl residual concentrations. Combined results suggested that biofilm can impact both C-DBP and N-DBP formation and decay in water distribution systems, where biomolecules in EPS affect DBP speciation.




Control of Biofilm Growth in Drinking Water Distribution Systems


Book Description

Describes the types of organisms often present in drinking water distribution system biofilms, how biofilms are established and grow, the public health problems associated with having biofilms in the distribution system, and tools that water treatment personnel can use to help control biofilm growth. Glossary of terms, and list of additional resources. Charts, tables and photos.




Treatment of Biofilms and Opportunistic Pathogens in Simulated Drinking Water Distribution Systems Using UV LEDs


Book Description

Biofilm formation in drinking water distribution systems (DWDS) has important implications for public health due to the potential proliferation of opportunistic pathogens (OPs). To inhibit the formation of biofilms and OPs in DWDS, Ultraviolet Light Emitting Diode (UV-LED) technologies show great promise due to their small footprint and versatility. This research aimed to expand the understanding of biofilm growth in DWDS and the application of UV LEDs to inactivate them. This thesis examined: (1) the inactivation of Legionella pneumophila and Pseudomonas fluorescens in CDC biofilm reactors on cast iron and stainless steel coupons and (2) the inactivation of tap water natural microbiome biofilms (NMB) grown on biostud reactors. Then, organisms were cultured and subsequently exposed to UV LEDs at 280 and 365 nm. Overall, organisms were more sensitive to 280 nm; however, 365 nm could be further investigated for possible photolytic reactions. Further work should consider scaling.