Inertial and Magnetic Tracking of Limb Segment Orientation for Inserting Humans Into Synthetic Environments


Book Description

Current motion tracking technologies fail to provide accurate wide area tracking of multiple users without interference and occlusion problems. This research proposes to overcome current limitations using nine-axis magnetic/ angular/rate/gravity (MARG) sensors combined with a quaternion-based complementary filter algorithm capable of continuously correcting for drift and following angular motion through all orientations without singularities. Primarily, this research involves the development of a prototype tracking system to demonstrate the feasibility of MARG sensor body motion tracking Mathematical analysis and computer simulation are used to validate the correctness of the complementary filter algorithm The implemented human body model utilizes the world-coordinate reference frame orientation data provided in quaternion form by the complementary filter and orients each limb segment independently. Calibration of the model and the inertial sensors is accomplished using simple but effective algorithms. Physical experiments demonstrate the utility of the proposed system by tracking of human limbs in real-time using multiple MARG sensors. The system is "sourceless" and does not suffer from range restrictions and interference problems. This new technology overcomes the limitations of motion tracking technologies currently in use. It has the potential to provide wide area tracking of multiple users in virtual environment and augmented reality applications.




Inertial Motion Tracking for Inserting Humans Into a Networked Synthetic Environment


Book Description

Inertial/Magnetic tracking is based on the use of sensors containing three orthogonally mounted angular rate sensors, three orthogonal linear accelerometers and three orthogonal magnetometers to determine independently the orientation of each link of an articulated rigid body. Inertial/magnetic orientation tracking could be applied to a broad range of problems which require real-time tracking of an articulated structure without being continuously dependent upon an artificially generated source. This research focuses on the goal of developing and demonstrating wireless full body tracking using MARG sensor modules. During the period of this report, six manuscripts were submitted for peer-reviewed publication. Of these six, five have been accepted. These include three journal publications and two conference papers. In additions, scientific advances have been made in the following areas: * Study of the Magnetic Effects on Inertial/Magnetic Sensor Modules * Development of a singularity free Factored Quaternion Algorithm * Development of an advanced Kalman Filter for Inertial/Magnetic Body Tracking *Initial development in using inertial/magnetic sensors for position tracking.




Inertial Motion Tracking Technology for Inserting Humans Into a Networked Synthetic Environment


Book Description

A novel hybrid inertial and magnetic human body motion tracking system was developed for inserting humans into virtual environments. The system is composed of two main components: in-house designed MARG sensors and a complementary data processing filter. Each MARG sensor is a nine-axis sensor consisting of a three-axis magnetometer a three-axis angular rate sensor: and a three-axis accelerometer and offers one-degree accuracy which is sufficient for human body motion tracking. The complementary filter is based on quaternions avoiding orientation singularities associated with Euler angles, and significantly reducing the computational requirements by not using any trigonometric functions. The filter is designed to take advantage of complementary information provided by high frequency angular rate data and low frequency magnetometer and accelerometer data. A tracking system with three MARG sensors was prototyped and demonstrated. Testing results indicated that the system offers superior performance compared with commercially available products. A patent on the MARG tracking system was filed in October 2001.




Nature-inspired Mobile Robotics - Proceedings Of The 16th International Conference On Climbing And Walking Robots And The Support Technologies For Mobile Machines


Book Description

The proceedings provide state-of-the-art scientific and engineering research findings and developments in the area of mobile robotics and assistive technologies. The proceedings collected together peer reviewed articles presented at the CLAWAR 2013 conference. It contains a strong showing of articles on legged locomotion with numbers of legs from two onwards. There is also a good collection of articles on systems that walls climbing, poles balancing, and other more complex structures following the traditional of CLAWAR themes. In addition, the proceedings also cover the subject of robot-human interaction, which focus on a more “human” way of communicating with humanoid robots. As for human assistive devices, proceedings also cover exoskeletal and prosthetic devices, robots for personal and nursing cares to address the issues of ageing population in our society. Finally, the issue of the deployment of robots in society, it social and ethically consideration are also addressed in the proceedings.




Advances on Theory and Practice of Robots and Manipulators


Book Description

This proceedings volume contains papers that have been selected after review for oral presentation at ROMANSY 2014, the 20th CISM-IFToMM Symposium on Theory and Practice of Robots and Manipulators. These papers cover advances on several aspects of the wide field of Robotics as concerning Theory and Practice of Robots and Manipulators. ROMANSY 2014 is the twentieth event in a series that started in 1973 as one of the first conference activities in the world on Robotics. The first event was held at CISM (International Centre for Mechanical Science) in Udine, Italy on 5-8 September 1973. It was also the first topic conference of IFToMM (International Federation for the Promotion of Mechanism and Machine Science) and it was directed not only to the IFToMM community. Proceedings volumes of ROMANSY have been always published to be available, also after the symposium, to a large public of scholars and designers with the aim to give an overview of new advances and trends in the theory, design and practice of robots. This proceedings volume, like previous ones of the series, contains contributions with achievements covering many fields of Robotics as Theory and Practice of Robots and Manipulators that can be an inspiration for future developments.




Advances in Intelligent Robotics and Collaborative Automation


Book Description

This book provides an overview of a series of advanced research lines in robotics as well as of design and development methodologies for intelligent robots and their intelligent components. It represents a selection of extended versions of the best papers presented at the Seventh IEEE International Workshop on Intelligent Data Acquisition and Advanced Computing Systems: Technology and Applications IDAACS 2013 that were related to these topics. Its contents integrate state of the art computational intelligence based techniques for automatic robot control to novel distributed sensing and data integration methodologies that can be applied to intelligent robotics and automation systems. The objective of the text was to provide an overview of some of the problems in the field of robotic systems and intelligent automation and the approaches and techniques that relevant research groups within this area are employing to try to solve them.The contributions of the different authors have been grouped into four main sections:• Robots• Control and Intelligence• Sensing• Collaborative automationThe chapters have been structured to provide an easy to follow introduction to the topics that are addressed, including the most relevant references, so that anyone interested in this field can get started in the area.




Human-Computer Interaction. Recognition and Interaction Technologies


Book Description

The 3 volume-set LNCS 11566, 11567 + 11568 constitutes the refereed proceedings of the Human Computer Interaction thematic area of the 21st International Conference on Human-Computer Interaction, HCII 2019, which took place in Orlando, Florida, USA, in July 2019. A total of 1274 papers and 209 posters have been accepted for publication in the HCII 2019 proceedings from a total of 5029 submissions. The 125 papers included in this HCI 2019 proceedings were organized in topical sections as follows: Part I: design and evaluation methods and tools; redefining the human in HCI; emotional design, Kansei and aesthetics in HCI; and narrative, storytelling, discourse and dialogue. Part II: mobile interaction; facial expressions and emotions recognition; eye-gaze, gesture and motion-based interaction; and interaction in virtual and augmented reality. Part III: design for social challenges; design for culture and entertainment; design for intelligent urban environments; and design and evaluation case studies.




Applied Informatics and Communication, Part IV


Book Description

The five volume set CCIS 224-228 constitutes the refereed proceedings of the International conference on Applied Informatics and Communication, ICAIC 2011, held in Xi'an, China in August 2011. The 446 revised papers presented were carefully reviewed and selected from numerous submissions. The papers cover a broad range of topics in computer science and interdisciplinary applications including control, hardware and software systems, neural computing, wireless networks, information systems, and image processing.




VRST


Book Description




Multisensor Attitude Estimation


Book Description

There has been an increasing interest in multi-disciplinary research on multisensor attitude estimation technology driven by its versatility and diverse areas of application, such as sensor networks, robotics, navigation, video, biomedicine, etc. Attitude estimation consists of the determination of rigid bodies’ orientation in 3D space. This research area is a multilevel, multifaceted process handling the automatic association, correlation, estimation, and combination of data and information from several sources. Data fusion for attitude estimation is motivated by several issues and problems, such as data imperfection, data multi-modality, data dimensionality, processing framework, etc. While many of these problems have been identified and heavily investigated, no single data fusion algorithm is capable of addressing all the aforementioned challenges. The variety of methods in the literature focus on a subset of these issues to solve, which would be determined based on the application in hand. Historically, the problem of attitude estimation has been introduced by Grace Wahba in 1965 within the estimate of satellite attitude and aerospace applications. This book intends to provide the reader with both a generic and comprehensive view of contemporary data fusion methodologies for attitude estimation, as well as the most recent researches and novel advances on multisensor attitude estimation task. It explores the design of algorithms and architectures, benefits, and challenging aspects, as well as a broad array of disciplines, including: navigation, robotics, biomedicine, motion analysis, etc. A number of issues that make data fusion for attitude estimation a challenging task, and which will be discussed through the different chapters of the book, are related to: 1) The nature of sensors and information sources (accelerometer, gyroscope, magnetometer, GPS, inclinometer, etc.); 2) The computational ability at the sensors; 3) The theoretical developments and convergence proofs; 4) The system architecture, computational resources, fusion level.