Introduction to Microprocessors


Book Description

A textbook for a wide range of introductory courses in FE and HE. Provides an introduction to microprocessors, assuming no previous knowledge or a technical or mathematical background. All technical terms are carefully introduced and difficult subjects are clearly explained.




Microprocessors & Introduction to Microcontroller


Book Description

The book is written for an undergraduate course on the 8085 and 8086 microprocessors and 8051 microcontroller. It provides comprehensive coverage of the hardware and software aspects of 8085 and 8086 microprocessors and 8051 microcontroller. The book uses plain and lucid language to explain each topic. A large number of programming examples is the feature of this book. The book provides the logical method of describing the various complicated concepts and stepwise techniques for easy understanding, making the subject more interesting. The book is divided into three parts. The first part focuses on the 8085 microprocessor. It teaches you the 8085 architecture, pin description, bus organization, instruction set, addressing modes, instruction formats, Assembly Language Programming (ALP), instruction timing diagrams, interrupts and interfacing 8085 with support chips, memory and peripheral ICs - 8251, 8253, 8255, 8259 and 8279. It also explains the interfacing of 8085 with data converters - ADC and DAC- and introduces a temperature control system design. The second part focuses on the 8086 microprocessor. It teaches you the 8086 architecture, register organization, memory segmentation, interrupts, addressing modes, operating modes - minimum and maximum modes, interfacing 8086 with support chips, minimum and maximum mode 8086 systems and timings. The third part focuses on the 8051 microcontroller. It teaches you the 8051 architecture, pin description, instruction set, programming 8051 and interfacing 8051 with external memory. It explains timers/counters, serial port, interrupts of 8051 and their programming. It also describes the interfacing 8051 with keyboards, LCDs and LEDs and explains the control of servomotor, stepper motors and washing machine using 8051.




Digital Electronics and Introduction to Microprocessors and Microcontrollers


Book Description

The book begins with bipolar and unipolar logic families. It teaches you the TTL and CMOS logic families. It provides in-depth information about analog to digital converters and digital to analog converters. It also covers semiconductor memories and programmable logic devices. Then the book introduces microprocessors and microcontrollers. It introduces microprocessor with basic concepts, terminologies, phases in the execution process, evolution, block diagram, programming, instruction format, addressing modes, architectural advancements, selection criteria and applications. It also explains the block diagram, various types and applications of the microcontrollers. Finally, the book incorporates a detailed discussion of display devices.




MICROPROCESSORS AND MICROCONTROLLERS


Book Description

Primarily intended for diploma, undergraduate and postgraduate students of electronics, electrical, mechanical, information technology and computer engineering, this book offers an introduction to microprocessors and microcontrollers. The book is designed to explain basic concepts underlying programmable devices and their interfacing. It provides complete knowledge of the Intel’s 8085 and 8086 microprocessors and 8051 microcontroller, their architecture, programming and concepts of interfacing of memory, IO devices and programmable chips. The text has been organized in such a manner that a student can understand and get well-acquainted with the subject, independent of other reference books and Internet sources. It is of greater use even for the AMIE and IETE students—those who do not have the facility of classroom teaching and laboratory practice. The book presents an integrated treatment of the hardware and software aspects of the 8085 and 8086 microprocessors and 8051 microcontroller. Elaborated programming, solved examples on typical interfacing problems, and a useful set of exercise problems in each chapter serve as distinguishing features of the book.




Introduction to Microprocessors and Microcontrollers


Book Description

Assuming only a general science education this book introduces the workings of the microprocessor, its applications, and programming in assembler and high level languages such as C and Java. Practical work and knowledge-check questions contribute to building a thorough understanding with a practical focus. The book concludes with a step-by-step walk through a project based on the PIC microcontroller. The concise but clearly written text makes this an ideal book for electronics and IT students and a wide range of technicians and engineers, including IT systems support staff, and maintenance / service engineers.*Crisp's conversational style introduces the fundamentals of the micro (microprocessors, microcontrollers, systems on a chip) in a way that is utterly painless but technically spot-on: the talent of a true teacher.*Microprocessors and microcontrollers are covered in one book, reflecting the importance of embedded systems in today's computerised world.*Practical work and knowledge-check questions support a lively text to build a firm understanding of the subject.




Microprocessors and Microcontrollers


Book Description

Key Features --




Microprocessors & Microcontrollers


Book Description

Pentium Microprocessor Historical evolution of 80286, 386 and 486 processors, Pentium features and architecture, Pin description, Functional description, Pentium real mode, Pentium RISC features, Pentium super-scalar architecture - pipelining, Instruction paring rules, Branch prediction, Instruction and data caches The floating-point unit.Bus Cycles and Memory OrganisationInitialization and configuration, Bus operations-reset, Non pipelined and pipelined (read and write), Memory organisation and I/O organisation, Data transfer mechanism-8 bit, 16 bit, 32 bit data bus interface.Pentium programmingProgrammer's model, Register set, Addressing modes, Instruction set, Data types, Data transfer instructions, String instructions, Arithmetic instructions, Logical instructions, Bit manipulation instructions, Program transfer instructions and Processor control instructions.Protected ModeIntroduction, Segmentation-support registers, Related instructions descriptors, Memory management through segmentation, Logical to linear address translation, Protection by segmentation, Privilege level-protection, Related instructions, Inter-privilege level transfer of control, Paging-support registers, descriptors, Linear to physical address translation, TLB, Page level protection, Virtual memory.Multitasking, Interrupts Exceptions and I/OMultitasking - Support registers, Related descriptors, Task switching, I/O Permission bit map. Virtual mode - features, Address generation, Privilege level, Instructions and registers available, entering and leaving V86 mode. Interrupt structure - Real, Protected and Virtual 8086 modes, I/O handling in Pentium, Comparison of all three modes.8051 Micro-controllerMicro-controller MCS-51 family architecture, On-chip data memory and program memory organization - Register set, Register bank, SFRs, External data memory and program memory, Interrupts structure, Timers and their programming, Serial port and programming, Other features, Design of minimum system using 8051 micro-controller for various applications.PIC Micro-controllerOverview and features of PIC16C, PIC 16F8XX, Pin diagram, Capture mode, Compare mode, PWM mode, Block diagram, Programmer's model PIC, Reset and clocking.Memory organization - program memory, data memory, Flash, EEPROM, PIC 16F8XX addressing modes, Instruction set, programming, I/O ports, Interrupts, Timers, ADC.




Introduction to Microcontrollers


Book Description

Introduction to Microcontrollers is a comprehensive, introductory text/reference for electrical and computer engineers and students with little experience with a high-level programming language. It systematically teaches the programming of a microcontroller in assembly language, as well as C and C++. This books also covers the principles of good programming practice through top-down design and the use of data structures. It is suitable as an introductory text for a first course on microcomputers that demonstrates what a small computer can do. - Shows how a computer executes instructions; - Shows how a high-level programming language converts to assembler language; - Shows how a microcontroller is interfaced to the outside world; - Hundreds of examples, experiments, "brain-teasers" and motivators; - More than 20 exercises at the end of each chapter




Microprocessor Systems


Book Description

Provides an introduction to microprocessor systems, their operation and design. The text covers topics needed by engineers and computer scientists who are interested in applying microprocessors in practical situations, such as computer hardware, software, and the design and testing of systems.




MICROPROCESSORS AND MICROCONTROLLERS


Book Description

This book provides the students with a solid foundation in the technology of microprocessors and microcontrollers, their principles and applications. It comprehensively presents the material necessary for understanding the internal architecture as well as system design aspects of Intel’s legendary 8085 and 8086 microprocessors and Intel’s 8051 and 8096 microcontrollers. The book throughout maintains an appropriate balance between the basic concepts and the skill sets needed for system design. Besides, the book lucidly explains the hardware architecture, the instruction set and programming, support chips, peripheral interfacing, and cites several relevant examples to help the readers develop a complete understanding of industrial application projects. Several system design case studies are included to reinforce the concepts discussed. With exhaustive coverage provided and practical approach emphasized, the book would be indispensable to undergraduate students of Electrical and Electronics, Electronics and Communication, and Electronics and Instrumentation Engineering. It can be used for a variety of courses in Microprocessors, Microcontrollers, and Embedded System Design.