› › Learning Autodesk Inventor 2021 With Robot Kit

Learning Autodesk Inventor 2021

Author : Randy Shih

Publisher : SDC Publications

Page : 513 pages

File Size : 48,87 MB

Release : 2020-07-22

Category : Computers

ISBN : 1630573442

Get eBook

Book Description

This book will teach you everything you need to know to start using Autodesk Inventor 2021 with easy to understand, step-by-step tutorials. This book features a simple robot design used as a project throughout the book. You will learn to model parts, create assemblies, run simulations and even create animations of your robot design. An unassembled version of the same robot used throughout the book can be bundled with the book. No previous experience with Computer Aided Design(CAD) is needed since this book starts at an introductory level. The author begins by getting you familiar with the Inventor interface and its basic tools. You will start by learning to model simple robot parts and before long you will graduate to creating more complex parts and multi-view drawings. Along the way you will learn the fundamentals of parametric modeling through the use of geometric constraints and relationships. You will also become familiar with many of Inventor's powerful tools and commands that enable you to easily construct complex features in your models. Also included is coverage of gears, gear trains and spur gear creation using Autodesk Inventor. This book continues by examining the different mechanisms commonly used in walking robots. You will learn the basic types of planar four-bar linkages commonly used in mechanical designs and how to use the GeoGebra Dynamic Geometry software to simulate and analyze 2D linkages. Using the knowledge you gained about linkages and mechanism, you will learn how to modify your robot and change its behavior by modifying or creating new parts. In the final chapter of this book you learn how to combine all the robot parts into assemblies and then run motion analysis. You will finish off your project by creating 3D animations of your robot in action. There are many books that show you how to perform individual tasks with Autodesk Inventor, but this book takes you through an entire project and shows you the complete engineering process. By the end of this book you will have modeled and assembled nearly all the parts that make up the TAMIYA® Mechanical Tiger and can start building your own robot.





Learning Autodesk Inventor 2022

Author : Randy Shih

Publisher : SDC Publications

Page : 510 pages

File Size : 28,91 MB

Release : 2021-08

Category : Computers

ISBN : 1630574414

Get eBook

Book Description

This book will teach you everything you need to know to start using Autodesk Inventor 2022 with easy to understand, step-by-step tutorials. This book features a simple robot design used as a project throughout the book. You will learn to model parts, create assemblies, run simulations and even create animations of your robot design. An unassembled version of the same robot used throughout the book can be bundled with the book. No previous experience with Computer Aided Design(CAD) is needed since this book starts at an introductory level. The author begins by getting you familiar with the Inventor interface and its basic tools. You will start by learning to model simple robot parts and before long you will graduate to creating more complex parts and multi-view drawings. Along the way you will learn the fundamentals of parametric modeling through the use of geometric constraints and relationships. You will also become familiar with many of Inventor's powerful tools and commands that enable you to easily construct complex features in your models. Also included is coverage of gears, gear trains and spur gear creation using Autodesk Inventor. This book continues by examining the different mechanisms commonly used in walking robots. You will learn the basic types of planar four-bar linkages commonly used in mechanical designs and how to use the GeoGebra Dynamic Geometry software to simulate and analyze 2D linkages. Using the knowledge you gained about linkages and mechanism, you will learn how to modify your robot and change its behavior by modifying or creating new parts. In the final chapter of this book you learn how to combine all the robot parts into assemblies and then run motion analysis. You will finish off your project by creating 3D animations of your robot in action. There are many books that show you how to perform individual tasks with Autodesk Inventor, but this book takes you through an entire project and shows you the complete engineering process. By the end of this book you will have modeled and assembled nearly all the parts that make up the TAMIYA® Mechanical Tiger and can start building your own robot.



Smart Robotics with LEGO MINDSTORMS Robot Inventor

Author : Aaron Maurer

Publisher : Packt Publishing Ltd

Page : 438 pages

File Size : 22,76 MB

Release : 2021-05-07

Category : Computers

ISBN : 180056998X

Get eBook

Book Description

Discover how to use the LEGO MINDSTORMS Inventor kit and boost your confidence in robotics Key FeaturesGain confidence in building robots using creative designsLearn advanced robotic features and find out how to integrate them to build a robotWork with the block coding language used in robotics software in a practical wayBook Description LEGO MINDSTORMS Robot Inventor is the latest addition to the LEGO MINDSTORMS theme. It features unique designs that you can use to build robots, and also enable you to perform activities using the robot inventor application. You'll begin by exploring the history of LEGO MINDSTORMS, and then delve into various elements of the Inventor kit. Moving on, you'll start working on different projects which will prepare you to build a variety of smart robots. The first robotic project involves designing a claw to grab objects, and helps you to explore how a smart robot is used in everyday life and in industry. The second project revolves around building a working guitar that can be played and modified to meet the needs of the user. As you advance, you'll explore the concept of biomimicry as you discover how to build a scorpion robot. In addition to this, you'll also work on a classic robotic challenge by building a sumobot. Throughout the book, you'll come across a variety of projects that will provide you with hands-on experience in building creative robots, such as building a Dragster, Egg Decorator, and Plankton from Spongebob Squarepants. By the end of this LEGO book, you'll have got to grips with the concepts behind building a robot, and also found creative ways to integrate them using the application based on your creative insights and ideas. What you will learnDiscover how the Robot Inventor kit works, and explore its parts and the elements inside themDelve into the block coding language used to build robotsFind out how to create interactive robots with the help of sensorsUnderstand the importance of real-world robots in today's landscapeRecognize different ways to build new ideas based on existing solutionsDesign basic to advanced level robots using the Robot Inventor kitWho this book is for This book is for robot enthusiasts, LEGO lovers, hobbyists, educators, students, and anyone looking to learn about the new LEGO Robot Inventor kit. This book is designed to go beyond the basic build through to intermediate and advanced builds, and enables you to add your personal flair to the builds and codes.



The LEGO MINDSTORMS Robot Inventor Activity Book

Author : Daniele Benedettelli

Publisher : No Starch Press

Page : 250 pages

File Size : 14,77 MB

Release : 2021-09-21

Category : Crafts & Hobbies

ISBN : 171850182X

Get eBook

Book Description

An introduction to the LEGO Mindstorms Robot Inventor Kit through seven engaging projects. With its amazing assortment of bricks, motors, and smart sensors, the LEGO® MINDSTORMS® Robot Inventor set opens the door to a physical-meets-digital world. The LEGO MINDSTORMS Robot Inventor Activity Book expands that world into an entire universe of incredibly fun, uniquely interactive robotic creations! Using the Robot Inventor set and a device that can run the companion app, you’ll learn how to build bots beyond your imagination—from a magical monster that gobbles up paper and answers written questions, to a remote-controlled transformer car that you can drive, steer, and shape-shift into a walking humanoid robot at the press of a button. Author and MINDSTORMS master Daniele Benedettelli, a robotics expert, takes a project-based approach as he leads you through an increasingly sophisticated collection of his most captivating robot models, chapter by chapter. Each project features illustrated step-by-step building instructions, as well as detailed explanations on programming your robots through the MINDSTORMS App—no coding experience required. As you build and program an adorable pet turtle, an electric guitar that lets you shred out solos, a fully functional, whiz-bang pinball machine and more, you’ll discover dozens of cool building and programming techniques to apply to your own LEGO creations, from working with gears and motors, to smoothing out sensor measurement errors, storing data in variables and lists, and beyond. By the end of this book, you’ll have all the tools, talent and inspiration you need to invent your own LEGO MINDSTORMS robots.



Tools for Design Using AutoCAD 2021 and Autodesk Inventor 2021

Author : Randy Shih

Publisher : SDC Publications

Page : 647 pages

File Size : 42,32 MB

Release : 2020-07-21

Category : Computers

ISBN : 1630573531

Get eBook

Book Description

Tools for Design is intended to provide you with an overview of computer aided design using two popular CAD software packages from Autodesk: AutoCAD and Autodesk Inventor. This book explores the strengths of each package and shows how they can be used in design, both separately and in combination with each other. What you'll learn How to create and dimension 2D multiview drawings using AutoCAD How to freehand sketch using axonometric, oblique and perspective projection techniques How to create 3D parametric models and 2D multiview drawings using Autodesk Inventor How to reuse design information between AutoCAD and Autodesk Inventor How to combine parts into assemblies including assembly modeling with a LEGO® MINDSTORMS® Education Base Set, with a TETRIX® kit and a VEX Robot Kit How to perform basic finite element stress analysis using Inventor Stress Analysis Module Who this book is for This book is designed for high school and college age students wanting to learn the fundamentals of computer aided design with AutoCAD and Inventor and how the two can be used together. No prior CAD experience is required.



Parametric Modeling with Autodesk Inventor 2021

Author : Randy Shih

Publisher : SDC Publications

Page : 621 pages

File Size : 18,40 MB

Release : 2020-07

Category : Computers

ISBN : 1630573604

Get eBook

Book Description

Parametric Modeling with Autodesk Inventor 2021 contains a series of seventeen tutorial style lessons designed to introduce Autodesk Inventor, solid modeling, and parametric modeling. It uses a hands-on, exercise-intensive approach to all the important parametric modeling techniques and concepts. The lessons guide the user from constructing basic shapes to building intelligent mechanical designs, to creating multi-view drawings and assembly models. Other featured topics include sheet metal design, motion analysis, 2D design reuse, collision and contact, stress analysis, 3D printing and the Autodesk Inventor 2021 Certified User Examination. Video Training Included with every new copy of this book is access to extensive video training. The video training parallels the exercises found in the text and are designed to be watched first before following the instructions in the book. However, the videos do more than just provide you with click by click instructions. Author Luke Jumper also includes a brief discussion of each tool, as well as rich insight into why and how the tools are used. Luke isn’t just telling you what to do, he’s showing and explaining to you how to go through the exercises while providing clear descriptions of the entire process. It’s like having him there guiding you through the book. These videos will provide you with a wealth of information and brings the text to life. They are also an invaluable resource for people who learn best through a visual experience. These videos deliver a comprehensive overview of the tools found in Autodesk Inventor and perfectly complement and reinforce the exercises in the book. Autodesk Inventor 2021 Certified User Examination The content of Parametric Modeling with Autodesk Inventor 2021 covers the performance tasks that have been identified by Autodesk as being included on the Autodesk Inventor 2021 Certified User examination. Special reference guides show students where the performance tasks are covered in the book.



Autodesk Inventor 2021 and Engineering Graphics

Author : Randy Shih

Publisher : SDC Publications

Page : 683 pages

File Size : 21,67 MB

Release : 2020-06-23

Category : Computers

ISBN : 163057340X

Get eBook

Book Description

Autodesk Inventor 2021 and Engineering Graphics: An Integrated Approach will teach you the principles of engineering graphics while instructing you on how to use the powerful 3D modeling capabilities of Autodesk Inventor 2021. Using step-by-step tutorials, this text will teach you how to create and read engineering drawings while becoming proficient at using the most common features of Autodesk Inventor. By the end of the book you will be fully prepared to take and pass the Autodesk Inventor Certified User Exam. This text is intended to be used as a training guide for students and professionals. The chapters in this text proceed in a pedagogical fashion to guide you from constructing basic shapes to making complete sets of engineering drawings. This text takes a hands-on, exercise-intensive approach to all the important concepts of Engineering Graphics, as well as in-depth discussions of parametric feature-based CAD techniques. This textbook contains a series of fifteen chapters, with detailed step-by-step tutorial style lessons, designed to introduce beginning CAD users to the graphic language used in all branches of technical industry. This book does not attempt to cover all of Autodesk Inventor 2021’s features, only to provide an introduction to the software. It is intended to help you establish a good basis for exploring and growing in the exciting field of Computer Aided Engineering. Autodesk Inventor 2021 Certified User Examination The content of this book covers the performance tasks that have been identified by Autodesk as being included on the Autodesk Inventor 2021 Certified User examination. Special reference guides show students where the performance tasks are covered in the book.



The LEGO MINDSTORMS EV3 Discovery Book

Author : Laurens Valk

Publisher : No Starch Press

Page : 400 pages

File Size : 18,39 MB

Release : 2014-06-14

Category : Technology & Engineering

ISBN : 1593275978

Get eBook

Book Description

LEGO MINDSTORMS has changed the way we think about robotics by making it possible for anyone to build real, working robots. The latest MINDSTORMS set, EV3, is more powerful than ever, and The LEGO MINDSTORMS EV3 Discovery Book is the complete, beginner-friendly guide you need to get started. Begin with the basics as you build and program a simple robot to experiment with motors, sensors, and EV3 programming. Then you’ll move on to a series of increasingly sophisticated robots that will show you how to work with advanced programming techniques like data wires, variables, and custom-made programming blocks. You’ll also learn essential building techniques like how to use beams, gears, and connector blocks effectively in your own designs. Master the possibilities of the EV3 set as you build and program: –The EXPLOR3R, a wheeled vehicle that uses sensors to navigate around a room and follow lines –The FORMULA EV3 RACE CAR, a streamlined remote-controlled race car –ANTY, a six-legged walking creature that adapts its behavior to its surroundings –SK3TCHBOT, a robot that lets you play games on the EV3 screen –The SNATCH3R, a robotic arm that can autonomously find, grab, lift, and move the infrared beacon –LAVA R3X, a humanoid robot that walks and talks More than 150 building and programming challenges throughout encourage you to think creatively and apply what you’ve learned to invent your own robots. With The LEGO MINDSTORMS EV3 Discovery Book as your guide, you’ll be building your own out-of-this-world creations in no time! Requirements: One LEGO MINDSTORMS EV3 set (LEGO SET #31313)



Homemade Robots

Author : Randy Sarafan

Publisher : No Starch Press

Page : 260 pages

File Size : 32,94 MB

Release : 2021-08-10

Category : Juvenile Nonfiction

ISBN : 1718500246

Get eBook

Book Description

Homemade Robots teaches total beginners how to quickly and easily build 10 mobile, autonomous bots with simple tools and common household materials. A Perfect DIY STEAM adventure for the electronically curious. Homemade Robots is a beginner’s guide to building a wide range of mobile, autonomous bots using common household materials. Its 10 creative and easy-to-follow projects are designed to maximize fun with minimal effort—no electronics experience necessary! From the teetering Wobbler to the rolling Barreller, each bot is self-driving and has a unique personality. There’s the aptly named Inchworm Bot made of aluminum rulers; Buffer, a street sweeper-like bot that polishes the floor as it walks; and Sail Bot, which changes direction based on the wind. Randy Sarafan’s hacker approach to sculptural robotics will appeal to builders of all ages. You’ll learn basic electronics, get comfortable with tools and mechanical systems, and gain the confidence to explore further on your own. A wide world of robots is yours to discover, and Homemade Robots is the perfect starting point.