Low-rank Coals for Power Generation, Fuel and Chemical Production


Book Description

Low-Rank Coals for Power Generation, Fuel and Chemical Production provides a thorough introduction to lignite (brown coal) and subbituminous coals and explores how they can be used efficiently and economically in place of hard coal. The book examines the undesirable characteristics of low-quality coals, such as high moisture content, low calorific value, and aggressive ash characteristics, and the resulting refinements to standard technologies and practices required for successful combustion, gasification, and pyrolysis.The first part of this book provides a comprehensive and systematic review of the properties of low-rank coals and corresponding preparation methods, such as drying, cleaning, and upgrading. Power generation from low-rank coals is the focus of Part 2, with chapter topics ranging from high efficiency pulverized coal combustion and circulatingfluidized bed combustion to emerging areas such as chemical looping and oxyfuel combustion. The final contributions address the important subjects of coal-to-liquids,polygeneration and coke production using low-rank coals, as well as the critical issue of carbon capture and storage.This book is a valuable resource for power generation engineers and researchers seeking to maximize the opportunities provided by these cheaper coal feedstocks for efficient and environmentally compatible power generation. - Presents the most in-depth treatment of low-rank coals available - Addresses both power generation and fuel production - Includes coverage that spans pulverized coal combustion and emerging technologies, such as CFBC, UCG, CLC, and oxyfuel combustion




Integrated Gasification Combined Cycle (IGCC) Technologies


Book Description

Integrated Gasification Combined Cycle (IGCC) Technologies discusses this innovative power generation technology that combines modern coal gasification technology with both gas turbine and steam turbine power generation, an important emerging technology which has the potential to significantly improve the efficiencies and emissions of coal power plants. The advantages of this technology over conventional pulverized coal power plants include fuel flexibility, greater efficiencies, and very low pollutant emissions. The book reviews the current status and future developments of key technologies involved in IGCC plants and how they can be integrated to maximize efficiency and reduce the cost of electricity generation in a carbon-constrained world. The first part of this book introduces the principles of IGCC systems and the fuel types for use in IGCC systems. The second part covers syngas production within IGCC systems. The third part looks at syngas cleaning, the separation of CO2 and hydrogen enrichment, with final sections describing the gas turbine combined cycle and presenting several case studies of existing IGCC plants. - Provides an in-depth, multi-contributor overview of integrated gasification combined cycle technologies - Reviews the current status and future developments of key technologies involved in IGCC plants - Provides several case studies of existing IGCC plants around the world




Advanced Power Plant Materials, Design and Technology


Book Description

Fossil-fuel power plants account for the majority of worldwide power generation. Increasing global energy demands, coupled with issues of ageing and inefficient power plants, have led to new power plant construction programmes. As cheaper fossil fuel resources are exhausted and emissions criteria are tightened, utilities are turning to power plants designed with performance in mind to satisfy requirements for improved capacity, efficiency, and environmental characteristics.Advanced power plant materials, design and technology provides a comprehensive reference on the state of the art of gas-fired and coal-fired power plants, their major components and performance improvement options. Part one critically reviews advanced power plant designs which target both higher efficiency and flexible operation, including reviews of combined cycle technology and materials performance issues.Part two reviews major plant components for improved operation, including advanced membrane technology for both hydrogen (H2) and carbon dioxide (CO2) separation, as well as flue gas handling technologies for improved emissions control of sulphur oxides (SOx), nitrogen oxides (NOx), mercury, ash and particulates. The section concludes with coverage of high-temperature sensors, and monitoring and control technology that are essential to power plant operation and performance optimisation.Part three begins with coverage of low-rank coal upgrading and biomass resource utilisation for improved power plant fuel flexibility. Routes to improve the environmental impact are also reviewed, with chapters detailing the integration of underground coal gasification and the application of carbon dioxide (CO2) capture and storage. Finally, improved generation performance is reviewed with coverage of syngas and hydrogen (H2) production from fossil-fuel feedstocks.With its distinguished international team of contributors, Advanced power plant materials, design and technology is a standard reference for all power plant engineers and operators, as well as to academics and researchers in this field. - Provides a comprehensive reference on the state-of-the-art gas-fired and coal-fired power plants, their major components and performance improvement options - Examines major plant components for improved operation as well as flue gas handling technologies for improved emissions control - Routes to improve environmental impact are discussed with chapters detailing the integration of underground coal gasification







Coal


Book Description

Coal will continue to provide a major portion of energy requirements in the United States for at least the next several decades. It is imperative that accurate information describing the amount, location, and quality of the coal resources and reserves be available to fulfill energy needs. It is also important that the United States extract its coal resources efficiently, safely, and in an environmentally responsible manner. A renewed focus on federal support for coal-related research, coordinated across agencies and with the active participation of the states and industrial sector, is a critical element for each of these requirements. Coal focuses on the research and development needs and priorities in the areas of coal resource and reserve assessments, coal mining and processing, transportation of coal and coal products, and coal utilization.




Coal and Coalbed Gas


Book Description

Bridging the gap in expertise between coal and coalbed gas, subfields in which opportunities for cross training have been nonexistent, Coal and Coalbed Gas sets the standard for publishing in these areas. This book treats coal and coalbed gas as mutually inclusive commodities in terms of their interrelated origin, accumulation, composition, distribution, generation, and development, providing a balanced understanding of this energy mix. Currently considered a non-renewable energy resource, coalbed gas, or coalbed methane, is a form of natural gas extracted from coal beds. In recent years, countries have begun to seek and exploit coal for its clean gas energy in an effort to alleviate environmental issues that come with coal use, making a book on this topic particularly timely. This volume takes into account processes of coalification, gasification, and storage and reservoir characterization and evaluation and looks at water management and environmental impacts as well. - Covers environmental issues in the development of coalbed gas - Includes case studies, field guides and data, examples, and analytical procedures from previous studies and investigations - Accessible by a large multidisciplinary market by one of the world's foremost experts on the topic




Clean Coal Technology and Sustainable Development


Book Description

This book gathers the proceedings of the 8th International Symposium on Coal Combustion. The contributions reflect the latest research on coal quality and combustion, techniques for pulverized coal combustion and fluidized bed combustion, special issues regarding CO2 capture (CCS), industrial applications, etc. – aspects that are of great importance in promoting academic communications between related areas and the technical development of coal-related fields. The International Symposium on Coal Combustion (ISCC), sponsored and organized by Tsinghua University since 1987, has established itself as an important platform allowing scientists and engineers to exchange information and ideas on the science and technology of coal combustion and related issues, and to forge new partnerships in the growing Chinese market. Researchers in the fields of clean coal combustion, carbon dioxide capture and storage, coal chemical engineering, energy engineering, etc. will greatly benefit from this book. Guangxi Yue, professor of the Department of Thermal Engineering in Tsinghua University, Beijing, China, and a member of Chinese Academy of Engineering(CAE). Shuiqing Li, professor of the Department of Thermal Engineering in Tsinghua University, Beijing, China.




Clean Electricity Through Advanced Coal Technologies


Book Description

Clean Electricity Through Advanced Coal Technologies focuses on the environmental damages caused by power plant operations and the environmental issues with solid waste, air and impoundment issues such as the massive TVA spill in Kingston, TN.




Sustainable Drying Technologies


Book Description

Introductory Chapter: Principles of Sustainable Drying.




Handbook of Coal Analysis


Book Description

All the guidance needed to test coal and analyze the results With the skyrocketing costs of most fuel sources, government, industry, and consumers are taking a greater interest in coal, an abundant and inexpensive alternative, which has been made more environmentally friendly through new technology. Published in response to this renewed interest, Handbook of Coal Analysis provides readers with everything they need to know about testing and analyzing coal. Moreover, it explains the meaning of test results and how these results can predict coal behavior and its corresponding environmental impact during use. The thorough coverage of coal analysis includes: * Detailed presentation of necessary standard tests and procedures * Explanation of coal behavior relative to its usage alongside the corresponding environmental issues * Coverage of nomenclature, terminology, sampling, and accuracy and precision of analysis * Step-by-step test method protocols for proximate analysis, ultimate analysis, mineral matter, physical and electrical properties, thermal properties, mechanical properties, spectroscopic properties, and solvent properties * Emphasis on relevant American Society for Testing and Materials (ASTM) standards and test methods, including corresponding International Organization for Standardization (ISO) and British Standards Institution (BSI) test method numbers To assist readers in understanding the material, a glossary of terms is provided. Each term is defined in straightforward language that enables readers to better grasp complex concepts and theory. References at the end of each chapter lead readers to more in-depth discussions of specialized topics. This is an essential reference for analytical chemists, process chemists, and engineers in the coal industry as well as other professionals and researchers who are looking to coal as a means to decrease dependence on foreign oil sources and devise more efficient, cleaner methods of energy production.