Low-Volume Roads Engineering - Best Management Practices Field Guide


Book Description

This Low-Volume Roads Engineering Best Management Practices Field Guide is intended to provide an overview of the key planning, location, design, construction, and maintenance aspects of roads that can cause adverse environmental impacts and to list key ways to prevent those impacts. Best Management Practices are general techniques or design practices that, when applied and adapted to fit site-specific conditions, will prevent or reduce pollution and maintain water quality. BMPs for roads have been developed by many agencies since roads often have a major adverse impact on water quality, and most of those impacts are preventable with good engineering and management practices. Roads that are not well planned or located, not properly designed or constructed, not well maintained, or not made with durable materials often have negative effects on water quality and the environment.




Gravel Roads


Book Description

The purpose of this manual is to provide clear and helpful information for maintaining gravel roads. Very little technical help is available to small agencies that are responsible for managing these roads. Gravel road maintenance has traditionally been "more of an art than a science" and very few formal standards exist. This manual contains guidelines to help answer the questions that arise concerning gravel road maintenance such as: What is enough surface crown? What is too much? What causes corrugation? The information is as nontechnical as possible without sacrificing clear guidelines and instructions on how to do the job right.




Low-Volume Road Engineering


Book Description

"Everything that sustains us – grown, mined, or drilled – begins its journey to us on a low-volume road (Long)." Defined as roads with traffic volumes of no more than 400 vehicles per day, they have enormous impacts on economies, communication, and social interaction. Low-volume roads comprise, at one end of the spectrum, farm-to-market roads, roads in developing countries, northern roads, roads on aboriginal lands and parklands; and at the other end of the spectrum, heavy haul roads for mining, oil and gas, oil sands extraction, and forestry. Low-Volume Road Engineering: Design, Construction, and Maintenance gives an international perspective to the engineering design of low-volume roads and their construction and maintenance. It is a single reference drawing from the dispersed literature. It lays out the basic principles of each topic, from road location and geometric design, pavement design, slope stability and erosion control, through construction to maintenance, then refers the reader to more comprehensive treatment elsewhere. Wherever possible, comparisons are made between the standard specifications and practices existing in the US, Canada, the UK, South Africa, Australia and New Zealand. Topics covered include the following: Road classification, location, and geometric design Pavement concepts, materials, and thickness design Drainage, erosion and sediment control, and watercrossings Slope stability Geosynthetics Road construction, maintenance, and maintenance management Low-Volume Road Engineering: Design, Construction, and Maintenance i s a valuable reference for engineers, planners, designers and project managers in consulting firms, contracting firms and NGOs. It also is an essential reference in support of university courses on transportation engineering and planning, and on mining, oil and gas, and forestry infrastructure.




Pervious Concrete Pavements


Book Description




AASHTO Guide for Design of Pavement Structures, 1993


Book Description

Design related project level pavement management - Economic evaluation of alternative pavement design strategies - Reliability / - Pavement design procedures for new construction or reconstruction : Design requirements - Highway pavement structural design - Low-volume road design / - Pavement design procedures for rehabilitation of existing pavements : Rehabilitation concepts - Guides for field data collection - Rehabilitation methods other than overlay - Rehabilitation methods with overlays / - Mechanistic-empirical design procedures.










Handbook of Road Ecology


Book Description

Winner of the IENE Project Award 2016. This authoritative volume brings together some of the world’s leading researchers, academics, practitioners and transportation agency personnel to present the current status of the ecological sustainability of the linear infrastructure – primarily road, rail and utility easements – that dissect and fragment landscapes globally. It outlines the potential impacts, demonstrates how this infrastructure is being improved, and how broad ecological principles are applied to mitigate the impact of road networks on wildlife. Research and monitoring is an important aspect of road ecology, encompassing all phases of a transportation project. This book covers research and monitoring to span the entire project continuum – starting with planning and design, through construction and into maintenance and management. It focuses on impacts and solutions for species groups and specific regions, with particular emphasis on the unique challenges facing Asia, South America and Africa. Other key features: Contributions from authors originating from over 25 countries, including from all continents Each chapter summarizes important lessons, and includes lists of further reading and thoroughly up to date references Highlights principles that address key points relevant to all phases in all road projects Explains best-practices based on a number of successful international case studies Chapters are "stand-alone", but they also build upon and complement each other; extensive cross-referencing directs the reader to relevant material elsewhere in the book Handbook of Road Ecology offers a comprehensive summary of approximately 30 years of global efforts to quantify the impacts of roads and traffic and implement effective mitigation. As such, it is essential reading for those involved in the planning, design, assessment and construction of new roads; the management and maintenance of existing roads; and the modifying or retrofitting of existing roads and problem locations. This handbook is an accessible resource for both developed and developing countries, including government transportation agencies, Government environmental/conservation agencies, NGOs, and road funding and donor organisations.




Bearing Capacity of Roads, Railways and Airfields


Book Description

Bearing Capacity of Roads, Railways and Airfields includes the contributions to the 10th International Conference on the Bearing Capacity of Roads, Railways and Airfields (BCRRA 2017, 28-30 June 2017, Athens, Greece). The papers cover aspects related to materials, laboratory testing, design, construction, maintenance and management systems of transport infrastructure, and focus on roads, railways and airfields. Additional aspects that concern new materials and characterization, alternative rehabilitation techniques, technological advances as well as pavement and railway track substructure sustainability are included. The contributions discuss new concepts and innovative solutions, and are concentrated but not limited on the following topics: · Unbound aggregate materials and soil properties · Bound materials characteritics, mechanical properties and testing · Effect of traffic loading · In-situ measurements techniques and monitoring · Structural evaluation · Pavement serviceability condition · Rehabilitation and maintenance issues · Geophysical assessment · Stabilization and reinforcement · Performance modeling · Environmental challenges · Life cycle assessment and sustainability Bearing Capacity of Roads, Railways and Airfields is essential reading for academics and professionals involved or interested in transport infrastructure systems, in particular roads, railways and airfields.




Low-volume Roads 2015


Book Description

Every four years, since 1975, the Transportation Research Board has collected the work, experience, and innovations of authors from six continents on the subject of low-volume roads. This 11th publication in a series of peer-reviewed volumes provides a special forum for the exchange of information and innovative ideas on the design, construction, maintenance, operations and safety of low-volume roads. Low-Volume Roads 2015 is presented in three volumes with 80 papers. This volume, Volume 3, presents 26 papers that address the following aspects of low-volume roads: materials, pavements, freeze-thaw, heavy loads, and construction.