Roadside Design Guide


Book Description

This document presents a synthesis of current information and operating practices related to roadside safety and is developed in metric units. The roadside is defined as that area beyond the traveled way (driving lanes) and the shoulder (if any) of the roadway itself. The focus of this guide is on safety treatments that minimize the likelihood of serious injuries when a driver runs off the road. This guide replaces the 1989 AASHTO "Roadside Design Guide."




Gravel Roads


Book Description

The purpose of this manual is to provide clear and helpful information for maintaining gravel roads. Very little technical help is available to small agencies that are responsible for managing these roads. Gravel road maintenance has traditionally been "more of an art than a science" and very few formal standards exist. This manual contains guidelines to help answer the questions that arise concerning gravel road maintenance such as: What is enough surface crown? What is too much? What causes corrugation? The information is as nontechnical as possible without sacrificing clear guidelines and instructions on how to do the job right.




Roundabouts


Book Description

TRB's National Cooperative Highway Research Program (NCHRP) Report 672: Roundabouts: An Informational Guide - Second Edition explores the planning, design, construction, maintenance, and operation of roundabouts. The report also addresses issues that may be useful in helping to explain the trade-offs associated with roundabouts. This report updates the U.S. Federal Highway Administration's Roundabouts: An Informational Guide, based on experience gained in the United States since that guide was published in 2000.




Flagging Handbook


Book Description




Traffic Control Systems Handbook


Book Description

This handbook, which was developed in recognition of the need for the compilation and dissemination of information on advanced traffic control systems, presents the basic principles for the planning, design, and implementation of such systems for urban streets and freeways. The presentation concept and organization of this handbook is developed from the viewpoint of systems engineering. Traffic control studies are described, and traffic control and surveillance concepts are reviewed. Hardware components are outlined, and computer concepts, and communication concepts are stated. Local and central controllers are described, as well as display, television and driver information systems. Available systems technology and candidate system definition, evaluation and implementation are also covered. The management of traffic control systems is discussed.




Urban Drainage Design Manual - Hydraulic Engineering Circular No. 22 - Third Edition


Book Description

This circular provides a comprehensive and practical guide for the design of storm drainage systems associated with transportation facilities. Design guidance is provided for the design of storm drainage systems which collect, convey, and discharge stormwater flowing within and along the highway right-of-way. Methods and procedures are given for the hydraulic design of storm drainage systems. Design methods are presented for evaluating rainfall and runoff magnitude, pavement drainage, gutter flow, inlet design, median and roadside ditch flow, structure design, and storm drain piping. Procedures for the design of detention facilities are also presented, along with an overview of storm water pumping stations and urban water quality practices. This edition presents a major change in the methodology discussed in Chapter 5 for designing channels and in Chapter 7 for calculating energy losses in storm drain access holes.




Traffic Signal Timing Manual


Book Description

This report serves as a comprehensive guide to traffic signal timing and documents the tasks completed in association with its development. The focus of this document is on traffic signal control principles, practices, and procedures. It describes the relationship between traffic signal timing and transportation policy and addresses maintenance and operations of traffic signals. It represents a synthesis of traffic signal timing concepts and their application and focuses on the use of detection, related timing parameters, and resulting effects to users at the intersection. It discusses advanced topics briefly to raise awareness related to their use and application. The purpose of the Signal Timing Manual is to provide direction and guidance to managers, supervisors, and practitioners based on sound practice to proactively and comprehensively improve signal timing. The outcome of properly training staff and proactively operating and maintaining traffic signals is signal timing that reduces congestion and fuel consumption ultimately improving our quality of life and the air we breathe. This manual provides an easy-to-use concise, practical and modular guide on signal timing. The elements of signal timing from policy and funding considerations to timing plan development, assessment, and maintenance are covered in the manual. The manual is the culmination of research into practices across North America and serves as a reference for a range of practitioners, from those involved in the day to day management, operation and maintenance of traffic signals to those that plan, design, operate and maintain these systems.




Manual of Uniform Traffic Control Devices for Canada


Book Description

"The Manual of Uniform Traffic Control Devices for Canada (MUTCDC) is a flagship document for the Transportation Association of Canada, and is an essential tool for all professionals involved in traffic management and control. It provides optimum guidance and preferred methods in the design, dimensions and application of devices for the control of traffic and the provision of information to drivers and other road users. The MUTCDC provides information and diagrams on traffic signs, signals, pavement markings and temporary conditions, offering guidance on types, use, and placement for each. This guidance is applicable to the variety of road authorities and jurisidictions across the nation. These devices constitute a system for conveying messages to the road user which advise of traffic regulations in order to enable observance of the law, or warn of road characteristics, road hazards and temporary conditions. Meeting these objectives improves safety, serves the convenience of the road user, and promotes the efficient movement of persons and goods and the orderly flow of traffic."--Page [iii].