Microbial Decontamination in the Food Industry


Book Description

The problem of creating microbiologically-safe food with an acceptable shelf-life and quality for the consumer is a constant challenge for the food industry. Microbial decontamination in the food industry provides a comprehensive guide to the decontamination problems faced by the industry, and the current and emerging methods being used to solve them.Part one deals with various food commodities such as fresh produce, meats, seafood, nuts, juices and dairy products, and provides background on contamination routes and outbreaks as well as proposed processing methods for each commodity. Part two goes on to review current and emerging non-chemical and non-thermal decontamination methods such as high hydrostatic pressure, pulsed electric fields, irradiation, power ultrasound and non-thermal plasma. Thermal methods such as microwave, radio-frequency and infrared heating and food surface pasteurization are also explored in detail. Chemical decontamination methods with ozone, chlorine dioxide, electrolyzed oxidizing water, organic acids and dense phase CO2 are discussed in part three. Finally, part four focuses on current and emerging packaging technologies and post-packaging decontamination.With its distinguished editors and international team of expert contributors, Microbial decontamination in the food industry is an indispensable guide for all food industry professionals involved in the design or use of novel food decontamination techniques, as well as any academics researching or teaching this important subject. - Provides a comprehensive guide to the decontamination problems faced by the industry and outlines the current and emerging methods being used to solve them - Details backgrounds on contamination routes and outbreaks, as well as proposed processing methods for various commodities including fresh produce, meats, seafood, nuts, juices and dairy products - Sections focus on emerging non-chemical and non-thermal decontamination methods, current thermal methods, chemical decontamination methods and current and emerging packaging technologies and post-packaging decontamination




Microbial Contamination and Food Degradation


Book Description

Microbial Contamination and Food Degradation, Volume 10 in the Handbook of Food Bioengineering series, provides an understanding of the most common microbial agents involved in food contamination and spoilage, and highlights the main detection techniques to help pinpoint the cause of contamination. Microorganisms may cause health-threatening conditions directly by being ingested together with contaminated food, or indirectly by producing harmful toxins and factors that can cause food borne illness. This resource discusses the potential sources of contamination, the latest advances in contamination research and strategies to prevent contamination using key methods of analysis and evaluation. - Presents modern alternatives for avoiding microbial spoilage and food degradation using preventative and intervention technologies - Provides key methods for addressing microbial contamination and preventing food borne illness through research and risk assessment analysis - Includes detailed information on bacterial contamination problems in different environmental environments and the methodologies to help solve those problems




Food Safety Engineering


Book Description

Food Safety Engineering is the first reference work to provide up-to-date coverage of the advanced technologies and strategies for the engineering of safe foods. Researchers, laboratory staff and food industry professionals with an interest in food engineering safety will find a singular source containing all of the needed information required to understand this rapidly advancing topic. The text lays a solid foundation for solving microbial food safety problems, developing advanced thermal and non-thermal technologies, designing food safety preventive control processes and sustainable operation of the food safety preventive control processes. The first section of chapters presents a comprehensive overview of food microbiology from foodborne pathogens to detection methods. The next section focuses on preventative practices, detailing all of the major manufacturing processes assuring the safety of foods including Good Manufacturing Practices (GMP), Hazard Analysis and Critical Control Points (HACCP), Hazard Analysis and Risk-Based Preventive Controls (HARPC), food traceability, and recalls. Further sections provide insights into plant layout and equipment design, and maintenance. Modeling and process design are covered in depth. Conventional and novel preventive controls for food safety include the current and emerging food processing technologies. Further sections focus on such important aspects as aseptic packaging and post-packaging technologies. With its comprehensive scope of up-to-date technologies and manufacturing processes, this is a useful and first-of-its kind text for the next generation food safety engineering professionals.




The Microbiological Safety of Low Water Activity Foods and Spices


Book Description

Low water activity (aw) and dried foods such as dried dairy and meat products, grain-based and dried ready-to-eat cereal products, powdered infant formula, peanut and nut pastes, as well as flours and meals have increasingly been associated with product recalls and foodborne outbreaks due to contamination by pathogens such as Salmonella spp. and enterohemorrhagic E. coli. In particular, recent foodborne outbreaks and product recalls related to Salmonella-contaminated spices have raised the level of public health concern for spices as agents of foodborne illnesses. Presently, most spices are grown outside the U.S., mainly in 8 countries: India, Indonesia, China, Brazil, Peru, Madagascar, Mexico and Vietnam. Many of these countries are under-developed and spices are harvested and stored with little heed to sanitation. The FDA has regulatory oversight of spices in the United States; however, the agency’s control is largely limited to enforcing regulatory compliance through sampling and testing only after imported foodstuffs have crossed the U.S. border. Unfortunately, statistical sampling plans are inefficient tools for ensuring total food safety. As a result, the development and use of decontamination treatments is key. This book provides an understanding of the microbial challenges to the safety of low aw foods, and a historic backdrop to the paradigm shift now highlighting low aw foods as vehicles for foodborne pathogens. Up-to-date facts and figures of foodborne illness outbreaks and product recalls are included. Special attention is given to the uncanny ability of Salmonella to persist under dry conditions in food processing plants and foods. A section is dedicated specifically to processing plant investigations, providing practical approaches to determining sources of persistent bacterial strains in the industrial food processing environment. Readers are guided through dry cleaning, wet cleaning and alternatives to processing plant hygiene and sanitation. Separate chapters are devoted to low aw food commodities of interest including spices, dried dairy-based products, low aw meat products, dried ready-to-eat cereal products, powdered infant formula, nuts and nut pastes, flours and meals, chocolate and confectionary, dried teas and herbs, and pet foods. The book provides regulatory testing guidelines and recommendations as well as guidance through methodological and sampling challenges to testing spices and low aw foods for the presence of foodborne pathogens. Chapters also address decontamination processes for low aw foods, including heat, steam, irradiation, microwave, and alternative energy-based treatments.




Novel Food Preservation and Microbial Assessment Techniques


Book Description

Demand for minimally processed foods has resulted in the development of innovative, non-thermal food preservation methods, such as high-pressure sonication, ozone, and UV treatment. This book presents a summary of these novel food processing techniques. It also covers new methods used to monitor microbial activity, including spectroscopic methods (




Principles of Food Sanitation


Book Description

Large volume food processing and preparation operations have increased the need for improved sanitary practices from processing to consumption. This trend presents a challenge to every employee in the food processing and food prepara tion industry. Sanitation is an applied science for the attainment of hygienic conditions. Because of increased emphasis on food safety, sanitation is receiving increased attention from those in the food industry. Traditionally, inexperienced employees with few skills who have received little or no training have been delegated sanitation duties. Yet sanitation employees require intensive training. In the past, these employees, including sanitation program managers, have had only limited access to material on this subject. Technical information has been confined primarily to a limited number of training manuals provided by regulatory agen cies, industry and association manuals, and recommendations from equipment and cleaning compound firms. Most of this material lacks specific information related to the selection of appropriate cleaning methods, equipment, compounds, and sanitizers for maintaining hygienic conditions in food processing and prepara tion facilities. The purpose of this text is to provide sanitation information needed to ensure hygienic practices. Sanitation is a broad subject; thus, principles related to con tamination, cleaning compounds, sanitizers, and cleaning equipment, and specific directions for applying these principles to attain hygienic conditions in food processing and food preparation are discussed. The discussion starts with the importance of sanitation and also includes regulatory requirements and voluntary sanitation programs including additional and updated information on Hazard Analysis Critical Control Points (HACCP).




Microbial Safety of Fresh Produce


Book Description

Microbial Safety of Fresh Produce covers all aspects of produce safety including pathogen ecology, agro-management, pre-harvest and post-harvest interventions, and adverse economic impacts of outbreaks. This most recent edition to the IFT Press book series examines the current state of the problems associated with fresh produce by reviewing the recent, high-profile outbreaks associated with fresh-produce, including the possible internalization of pathogens by plant tissues, and understanding how human pathogens survive and multiply in water, soils, and fresh fruits and vegetables.




New Methods of Food Preservation


Book Description




Progress in Food Preservation


Book Description

This volume presents a wide range of new approaches aimed at improving the safety and quality of food products and agricultural commodities. Each chapter provides in-depth information on new and emerging food preservation techniques including those relating to decontamination, drying and dehydration, packaging innovations and the use of botanicals as natural preservatives for fresh animal and plant products. The 28 chapters, contributed by an international team of experienced researchers, are presented in five sections, covering: Novel decontamination techniques Novel preservation techniques Active and atmospheric packaging Food packaging Mathematical modelling of food preservation processes Natural preservatives This title will be of great interest to food scientists and engineers based in food manufacturing and in research establishments. It will also be useful to advanced students of food science and technology.




Food Microbiology, 2 Volume Set


Book Description

This book covers application of food microbiology principles into food preservation and processing. Main aspects of the food preservation techniques, alternative food preservation techniques, role of microorganisms in food processing and their positive and negative features are covered. Features subjects on mechanism of antimicrobial action of heat, thermal process, mechanisms for microbial control by low temperature, mechanism of food preservation, control of microorganisms and mycotoxin formation by reducing water activity, food preservation by additives and biocontrol, food preservation by modified atmosphere, alternative food processing techniques, and traditional fermented products processing. The book is designed for students in food engineering, health science, food science, agricultural engineering, food technology, nutrition and dietetic, biological sciences and biotechnology fields. It will also be valuable to researchers, teachers and practising food microbiologists as well as anyone interested in different branches of food.