› › Micromachining Using Electrochemical Discharge Phenomenon

Micromachining Using Electrochemical Discharge Phenomenon

Author : Rolf Wuthrich

Publisher : William Andrew

Page : 219 pages

File Size : 21,23 MB

Release : 2014-11-08

Category : Technology & Engineering

ISBN : 0323265642

Get eBook

Book Description

Micro-machining is an advanced manufacturing technique of growing importance, and adoption of micro-machining using electrochemical discharges (Micro-ECDM) has increased steadily in recent years. Among new developments is the interest of industry in Micro-ECDM. However, the potential of the technology is not being fully utilized and there is no comprehensive reference book available today covering it. Micromachining Using Electrochemical Discharge Phenomenon, Second Edition fills this gap. It is unique in its detailed coverage of all aspects of the Micro-ECDM process, as well as Spark Assisted Chemical Engraving (SACE). As such, it covers technologies such as chemical etching, micro-drilling, and other material removal mechanisms, high aspect ratio machining, design and construction of the machining apparatus, and a wide range of applications. The new edition compares Micro-ECDM and SACE with other micromachining technologies such as laser machining and traditional EDM. ECDM is used for machining of electrically non-conductive materials. Micro-ECDM/SACE is mainly applied to glass and the book focuses on glass, but the authors also present new results on other materials such as ceramics. In addition, techniques to modify material properties for the machining process are explained. The authors discuss machining strategies including the latest developments in micro-texturing of glass micro-channels and reports on developments in controlling and analysis aspects of machining. This book is a unique reference for engineers and industrial researchers involved in development, design and use of micromachining, chemical micro-drilling or chemical engraving techniques and equipment. - Only all-encompassing reference coving Micro-ECDM and SACE available on the market - Covers a wide range of applications, including applications in the MEMS industry and the Medical Devices and Medical Diagnostics industries - New edition includes expanded sections on comparing Micro-ECDM/SACE with other micromachining technologies



Micromachining Using Electrochemical Discharge Phenomenon

Author : Rolf Wuthrich

Publisher : Elsevier

Page : 197 pages

File Size : 22,84 MB

Release : 2009-07-30

Category : Science

ISBN : 0815519834

Get eBook

Book Description

This book explains the fundamentals of SACE, promotes the technology, and encourages researchers and engineers from industry to use it for their specific applications. Therefore, the book, after presenting in details the fundaments of SACE (in particular the Electrochemical Discharges), deals mainly with practical aspects of implementing the machining technology. The book is written so that researchers from fields other than micro-technology (e.g., from life science) will be able to build a simple machining set-up, together with his mechanical work-shop, for individual needs. - Topics include: micro- and electrochemical discharge machining (including glass), microfluidics, non-conventional manufacturing, electrochemical discharges, biocompatibility, and anode effects - Provides applicable information for engineers in industry dealing with micromachining of glass, polymers, and ceramics - Covers a range of microfluidic devices (including micro-TAS) with applications in various fields like chemistry and life sciences



Micromachining Using Electrochemical Discharge Phenomenon

Author : Rolf Wüthrich

Publisher : William Andrew Pub

Page : 181 pages

File Size : 15,78 MB

Release : 2009

Category : Technology & Engineering

ISBN : 9780815515876

Get eBook

Book Description

This book presents an unconventional and largely unknown technology, which is able to micro-machine at relatively low cost glass, polymers and other materials. This process is called Spark Assisted Chemical Engraving (SACE), or Electro Chemical Discharge Machining (ECDM). First presented in 1968 in Japan by Kurafuji and Suda, this technology was studied essentially in the academic world and mainly applied for micro-fluidic devices. This book explains the fundamentals of SACE, promotes the technology, and encourages researchers and engineers from industry to use it for their specific applications. Therefore, the book, after presenting in details the fundaments of SACE (in particular the Electrochemical Discharges), deals mainly with practical aspects of implementing the machining technology. The book is written so that researchers from fields other than micro-technology (e.g., from life science) will be able to build a simple machining set-up, together with his mechanical work-shop, for individual needs. Topics include: micro- and electrochemical discharge machining (including glass), microfluidics, non-conventional manufacturing, electrochemical discharges, biocompatibility, and anode effects Provides applicable information for engineers in industry dealing with micromachining of glass, polymers, and ceramics Covers a range of microfluidic devices (including micro-TAS) with applications in various fields like chemistry and life sciences



Hybrid Micromachining and Microfabrication Technologies

Author : Sandip Kunar

Publisher : John Wiley & Sons

Page : 340 pages

File Size : 31,1 MB

Release : 2023-05-04

Category : Technology & Engineering

ISBN : 1394174934

Get eBook

Book Description

HYBRID MICROMACHINING and MICROFABRICATION TECHNOLOGIES The book aims to provide a thorough understanding of numerous advanced hybrid micromachining and microfabrication techniques as well as future directions, providing researchers and engineers who work in hybrid micromachining with a much-appreciated orientation. The book is dedicated to advanced hybrid micromachining and microfabrication technologies by detailing principals, techniques, processes, conditions, research advances, research challenges, and opportunities for various types of advanced hybrid micromachining and microfabrication. It discusses the mechanisms of material removal supported by experimental validation. Constructional features of hybrid micromachining setup suitable for industrial micromachining applications are explained. Separate chapters are devoted to different advanced hybrid micromachining and microfabrication to design and development of micro-tools, which is one of the most vital components in advanced hybrid micromachining, and which can also be used for various micro and nano applications. Power supply, and other major factors which influence advanced hybrid micromachining processes, are covered and research findings concerning the improvement of machining accuracy and efficiency are reported.



Hybrid Machining Processes

Author : Kapil Gupta

Publisher : Springer

Page : 75 pages

File Size : 24,17 MB

Release : 2015-11-07

Category : Technology & Engineering

ISBN : 3319259229

Get eBook

Book Description

This book describes various hybrid machining and finishing processes. It gives a critical review of the past work based on them as well as the current trends and research directions. For each hybrid machining process presented, the authors list the method of material removal, machining system, process variables and applications. This book provides a deep understanding of the need, application and mechanism of hybrid machining processes.



Micro-electrical Discharge Machining Processes

Author : Golam Kibria

Publisher : Springer

Page : 314 pages

File Size : 35,11 MB

Release : 2019-02-04

Category : Technology & Engineering

ISBN : 9789811330735

Get eBook

Book Description

This book offers a comprehensive collection of micro electrical discharge machining (EDM) processes, including hybrid processes. It discusses the theory behind each process and their applications in various technological as well as biomedical domains, and also presents a brief background to various micro EDM processes, current research challenges, and detailed case studies of micro-manufacturing miniaturized parts. The book serves as a valuable guide for students and researchers interested in micro EDM and other related processes.



Electric Discharge Hybrid-Machining Processes

Author : Basil Kuriachen

Publisher : CRC Press

Page : 373 pages

File Size : 26,4 MB

Release : 2022-03-30

Category : Technology & Engineering

ISBN : 1000517802

Get eBook

Book Description

This book provides the knowledge and insight into the fundamental aspects of Electric Discharge Machining (EDM) processes and various hybrid machining technologies derived to improve the machining efficiencies. Fundamental theory of material removal, recent research trends and future research directions have been covered in each chapter. After explaining EDM, Dry and Near-dry EDM processes, Electrochemical Spark Machining, Arc Machining processes, Electric Discharge Hybrid-Turning processes, Electrical Discharge Grinding, Electric Discharge Milling, and various assisted EDM processes have been discussed. Finally, modeling and simulation of hybrid machining processes are also included. The book reflects the recent developments and trends in electric discharge hybrid machining processes. It covers in detail the basics of EDM, various hybrid and assistive technologies in EDM. It includes the updated discussion on the significance of process parameters in various hybrid EDM processes. An overview of modelling and simulation of hybrid EDM process is provided. This book is aimed at Graduate students, researchers in manufacturing engineering, production engineering, and materials engineering.



Machining—Recent Advances, Applications and Challenges

Author : Luis Norberto L´opez de Lacalle

Publisher : MDPI

Page : 554 pages

File Size : 30,86 MB

Release : 2019-08-26

Category : Technology & Engineering

ISBN : 3039213776

Get eBook

Book Description

The Special Issue Machining—Recent Advances, Applications and Challenges is intended as a humble collection of some of the hottest topics in machining. The manufacturing industry is a varying and challenging environment where new advances emerge from one day to another. In recent years, new manufacturing procedures have retained increasing attention from the industrial and scientific community. However, machining still remains the key operation to achieve high productivity and precision for high-added value parts. Continuous research is performed, and new ideas are constantly considered. This Special Issue summarizes selected high-quality papers which were submitted, peer-reviewed, and recommended by experts. It covers some (but not only) of the following topics: High performance operations for difficult-to-cut alloys, wrought and cast materials, light alloys, ceramics, etc.; Cutting tools, grades, substrates and coatings. Wear damage; Advanced cooling in machining: Minimum quantity of lubricant, dry or cryogenics; Modelling, focused on the reduction of risks, the process outcome, and to maintain surface integrity; Vibration problems in machines: Active and passive/predictive methods, sources, diagnosis and avoidance; Influence of machining in new concepts of machine–tool, and machine static and dynamic behaviors; Machinability of new composites, brittle and emerging materials; Assisted machining processes by high-pressure, laser, US, and others; Introduction of new analytics and decision making into machining programming. We wish to thank the reviewers and staff from Materials for their comments, advice, suggestions and invaluable support during the development of this Special Issue.



Advances in Manufacturing Processes

Author : Harshit K. Dave

Publisher : Springer Nature

Page : 431 pages

File Size : 32,86 MB

Release : 2020-11-30

Category : Technology & Engineering

ISBN : 9811591172

Get eBook

Book Description

This book presents the select proceedings of the International Conference on Recent Advances in Manufacturing (RAM 2020). This volume, in particular, provides insights into current research trends and opportunities within the manufacturing processes domain such as conventional and unconventional manufacturing, micro and nano manufacturing, chemical and biochemical manufacturing, and computer-integrated manufacturing (CIM). The topics covered include emerging areas of the fourth industrial revolution such as additive manufacturing, sustainable and energy-efficient manufacturing, smart manufacturing, artificial intelligence in manufacturing application, and computer-integrated manufacturing. This book will be useful for to researchers and practitioners alike.



Micro-electrical Discharge Machining Processes

Author : Golam Kibria

Publisher : Springer

Page : 320 pages

File Size : 24,91 MB

Release : 2018-12-15

Category : Technology & Engineering

ISBN : 9811330743

Get eBook

Book Description

This book offers a comprehensive collection of micro electrical discharge machining (EDM) processes, including hybrid processes. It discusses the theory behind each process and their applications in various technological as well as biomedical domains, and also presents a brief background to various micro EDM processes, current research challenges, and detailed case studies of micro-manufacturing miniaturized parts. The book serves as a valuable guide for students and researchers interested in micro EDM and other related processes.