Author : Maarten Geerdes
Publisher : IOS Press
Page : 176 pages
File Size : 17,64 MB
Release : 2009
Category : Technology & Engineering
ISBN : 160750040X
"This publication was and can be used as an introductory text for students of metallurgy as well as for blast furnace operators and management. The latter will benefit to solve operational problems and process optimization issues." --Book Jacket.
Author : M. Geerdes
Publisher : IOS Press
Page : 276 pages
File Size : 42,2 MB
Release : 2020-11-04
Category : Technology & Engineering
ISBN : 1643681230
Modern Blast Furnace Ironmaking – An Introduction (Fourth Edition, 2020) describes the principles of the blast furnace process. As a starting point, the blast furnace is seen as a simple iron ore melter, while gradually the physical, chemical and metallurgical background of the blast furnace process is clarified. The book focuses on the control of the process with respect to thermal control, gas flow control and casthouse operation. In this book, all essential process details are described and a special focus is on cost optimization by low coke rates and on management of the process in case of disturbances and upsets. The optimization of the blast furnace is not only based on “best practice transfer”, but also requires conceptual understanding why a measure works in some cases and not in other cases. In other words, operational improvement is not only based on know–how, but as well on know–why. This publication can be used as an introductory text for students of metallurgy as well as for blast furnace operators and management.
Author : M. Geerdes
Publisher : IOS Press
Page : 228 pages
File Size : 26,80 MB
Release : 2015-04-07
Category : Technology & Engineering
ISBN : 1614994994
This book describes the blast furnace process for operators. As a starting point, the blast furnace is seen as a simple iron ore melter, while gradually the physical, chemical and metallurgical background is clarified. Operational observations, challenges and remedies are explained from this perspective. Optimization of the blast furnace process is not only based on “best practice transfer”, but also requires conceptual understanding of what works when. In other words: operational improvement is not only based on know–how, but on know–why as well. With Modern Blast Furnace Ironmaking – An Introduction (Third Edition, 2015) the reader has a compact compendium of the blast furnace process available: by operators and for operators and for those who are preparing to become operators.
Author : Ian Cameron
Publisher : Elsevier
Page : 826 pages
File Size : 34,65 MB
Release : 2019-10-22
Category : Technology & Engineering
ISBN : 0128142286
Blast Furnace Ironmaking: Analysis, Control, and Optimization uses a fundamental first principles approach to prepare a blast furnace mass and energy balance in ExcelTM. Robust descriptions of the main equipment and systems, process technologies, and best practices used in a modern blast furnace plant are detailed. Optimization tools are provided to help the reader find the best blast furnace fuel mix and related costs, maximize output, or evaluate other operational strategies using the ExcelTM model that the reader will develop. The first principles blast furnace ExcelTM model allows for more comprehensive process assessments than the 'rules of thumb' currently used by the industry. This book is suitable for undergraduate and postgraduate science and engineering students in the fields of chemical, mechanical, metallurgical and materials engineering. Additionally, steel company engineers, process technologists, and management will find this book useful with its fundamental approach, best practices description, and perspective on the future. - Provides sample problems, answers and assignments for each chapter - Explores how to optimize the blast furnace operation while maintaining required temperatures and gas flowrates - Describes all major blast furnace equipment and best practices - Features blast furnace operating data from five continents
Author : M. Geerdes
Publisher :
Page : 228 pages
File Size : 12,7 MB
Release : 2015
Category : Electronic book
ISBN :
Author : J. G. Peacey
Publisher : Elsevier
Page : 266 pages
File Size : 12,96 MB
Release : 2016-06-06
Category : Technology & Engineering
ISBN : 1483140873
The Iron Blast Furnace: Theory and Practice presents theoretical, experimental, and operational evidence about the iron blast furnace as well as a mathematical description of its operation. This book includes a set of equations that accurately describe stoichiometric and enthalpy balances for the process and which are consistent with observed temperatures and compositions in the furnace stack. These equations, which have been devised on the basis of the Rist approach, show the effects of altering any blast-furnace variable on the other operating requirements of the process. This monograph is comprised of 14 chapters and begins with a brief description of the blast-furnace process. The next chapter takes a look inside the furnace, paying particular attention to its behavior in front of the tuyères and the kinetics of the coke gasification reaction. The reader is then introduced to the thermodynamics and stoichiometry of the blast-furnace process; enthalpy balance for the bottom segment of the furnace; the effects of tuyères injectants on blast-furnace operations; and blast-furnace optimization by linear programming. A number of important variables covered by the equations are discussed, including hydrocarbon injection at the tuyères, oxygen enrichment of the blast, moisture, limestone decomposition, coke reactivity, and metalloid reduction. The effects of many of these variables are illustrated numerically in the text while others are demonstrated in sets of problems that follow each chapter. This text will be a valuable resource for metallurgists and materials scientists.
Author : Pasquale Cavaliere
Publisher : Springer
Page : 461 pages
File Size : 20,14 MB
Release : 2016-09-02
Category : Technology & Engineering
ISBN : 3319395297
This book describes improvements in the iron and steel making process in the past few decades. It also presents new and improved solutions to producing high quality products with low greenhouse emissions. In addition, it examines legislative regulations regarding greenhouse emissions all around the world and how to control these dangerous emissions in iron and steel making plants.
Author : Sujay Kumar Dutta
Publisher : Springer Nature
Page : 644 pages
File Size : 13,25 MB
Release : 2020-03-02
Category : Technology & Engineering
ISBN : 9811524378
This book presents the fundamentals of iron and steel making, including the physical chemistry, thermodynamics and key concepts, while also discussing associated problems and solutions. It guides the reader through the production process from start to finish, covers the raw materials, and addresses the types of processes and reactions involved in both conventional and alternative methods. Though primarily intended as a textbook for students of metallurgical engineering, the book will also prove a useful reference for professionals and researchers working in this area.
Author : Alan R. Williams
Publisher : BRILL
Page : 974 pages
File Size : 39,35 MB
Release : 2003
Category : History
ISBN : 9004124985
The suit of armour distinguishes the European Middle Ages & Renaissance. This book tells its story from the 14th to the 17th century, and the making of its steel. The metallurgy of 600 armours has been analysed, and their probable effectiveness in battle assessed.
Author : Subir Biswas
Publisher : Springer Nature
Page : 469 pages
File Size : 16,90 MB
Release : 2020-06-09
Category : Technology & Engineering
ISBN : 3030438074
This book promotes understanding of the raw material selection, refractory design, tailor-made refractory developments, refractory properties, and methods of application. It provides a complete analysis of modern iron and steel refractories. It describes the daily demands on modern refractories and describes how these needs can be addressed or improved upon to help achieve the cleanest and largest yields of iron and steel. The text contains end-of-chapter summaries to help reinforce difficult concepts. It also includes problems at the end of chapters to confirm the reader's understanding of topics such as hoop stress modeling in steel ladle and vessels, establishment of thermal gradient modeling , refractory corrosion dynamics, calculation of Blast furnace trough dimension based on thermal modeling, to name a few. Led by editors with backgrounds in both academia and industry, this book can be used in college courses, as a reference for industry professionals, and as an introduction to the technology for those making the transition to industry. Stands as a comprehensive introduction to the science and technology of modern steel and iron-making refractories that examines the processes, construction, and potential improvement of refractory performance and sustainability; Serves as a versatile resource appropriate for all levels, from the student to industry novices to professionals; Reinforces difficult-to-grasp concepts with end-of-chapter summaries; Maximizes reader understanding of key topics, such as refractory selection for steel ladle and vessels, and their corrosion dynamics, with real life problems.
