Numerical study of coupled THM/C processes related to geo-energy production


Book Description

In this thesis a parallel simulation platform, namely TOUGH2MP-FLAC3Dplus, was further developed by linking the multiphase multicomponent flow code TOUGH2MP and the further developed geomechanical code FLAC3Dplus for large-scale simulation of the coupled THM/C processes related to geo-energy production. A series of mathematical/physical models were developed and implemented in this platform, including (1) an improved equation of state for CO2-CH4-H2O-NaCl system which considers the effect of salt on phase partition and fluid properties in gas reservoirs; (2) a modified coupling approach for the simulation of hydraulic fracturing in tight geo-reservoirs, which considers the multiphase multicomponent leakoff effects; (3) a thermo-hydro-mechanical model based on a crack tensor for naturally fractured rock masses and faults. All these verified models have been applied in three different case studies, including CO2 enhanced gas recovery (EGR) in the Altmark natural gas field; (2) Hydraulic fracturing in three different types of geo-reservoirs (tight gas, oil and geothermal reservoir); (3) Geothermal energy utilization induced seismicity in Unterhaching. The developed models and the numerical platform can be used to predict the coupled THM/C behavior of rock formations, to optimize the CO2-EGR and hydraulic fracturing in tight geo-reservoirs, as well as reduce the geo-risks related to geo-energy production.




Development of coupled THM models for reservoir stimulation and geo-energy production with supercritical CO2 as working fluid


Book Description

In this dissertation, two specific numerical models have been developed to address the issues associated with utilization of supercritical CO2, like fracture creation, proppant placement and fracture closure in unconventional gas reservoirs, reservoir stimulation, heat production and CO2 sequestration in deep geothermal reservoirs, respectively. In unconventional gas reservoir, the model consisting of classic fracture model, proppant transport model as well as temperature-sensitive fracturing fluids (CO2, thickened CO2 and guar gum) has been integrated into the popular THM coupled framework (TOUGH2MP-FLAC3D), which has the ability to simulate single fracture propagation driven by different fracturing fluids in non-isothermal condition. To characterize the fracture network propagation and internal multi fluids behavior in deep geothermal reservoirs, an anisotropic permeability model on the foundation of the continuum anisotropic damage model has been developed and integrated into the popular THM coupled framework (TOUGH2MP-FLAC3D) as well. This model has the potential to simulate the reservoir stimulation and heat extraction based on a CO2-EGS concept.




Numerical study of the stimulation related thermo-hydro-mechanical processes in tight gas and deep geothermal reservoirs


Book Description

Hydraulic fracturing in combination with horizontal well is playing a key role in the efficient development of unconventional gas/oil reservoirs and deep geothermal resources. However, the integral operation, especially from the perspective of THM (Thermal-Hydraulic-Mechanic) interactions have not been studied systematically. In this thesis, targeted improvements were achieved through developing a series of mathematical/physical models, and their implementation into the existing numerical tools (FLAC3Dplus and TOUGH2MP-FLAC3D), including: (a) a new thermal module for FLAC3Dplus based entirely on the finite volume method (FVM), which is especially developed for the fracturing process and can also achieve the modeling of gel breaking; (b) a rock damage module of TOUGH2MP-FLAC3D, which also considers the impacts of rock damaging process on evolution of permeability; (c) an in-depth improved FLAC3Dplus simulator that obtains the ability to simulate a 3D fracture propagation with arbitrary orientation. After the corresponding verifications, the improved tools were applied in different case studies to reveal: a) influences of the fluid’s viscosity on the fracturing results in tight sandstone reservoirs; b) the induced seismicity during the fracturing operation and the reactivation of the natural faults; and c) the fracture propagation with arbitrary orientation.




Numerical study of physico- chemical interactions for CO2 sequestration and geothermal energy utilization in the Ordos Basin, China


Book Description

In this dissertation, three simulators (i.e. TOUGH2MP, TOUGHREACT and FLAC3D) were used to simulate the complex physical and chemical interactions induced by CO2 sequestration. The simulations were done instages, ranging from the two phase (water and CO2) fluid flow (H2), through coupled hydro-mechanical effects (H2M) and geochemical responses (i.e. CO2-water-rock interactions (H2C)), to the extension of CCS to CCUS by the application of combined geothermal production and CO2 sequestration technologies. The findings of this study are essential for a thorough understanding of the complex interactions in the multiphase, multicomponent porous media controlled by different physical and chemical mechanisms. Furthermore, the simulation results will provide an invaluable reference for field operations in CCS projects, especially for the full-integration pilot scale CCS project launched in the Ordos Basin. Subsequently, a preliminary site selection scheme for the combined geothermal production and CO2 sequestration was set up, which considered various factorsinvolved in site selection, ranging from safety, economical, environmental and technical issues. This work provides an important framework for the combined geothermal production and CO2 sequestration project. However, further numerical and field studies are still needed to improve on a series of criteria and related parameters necessary for a better understanding of the technology.




Coupled Thermo-Hydro-Mechanical-Chemical Processes in Fractured Rocks


Book Description

This book presents the coupled Thermo-Hydro-Mechanical-Chemical (THMC) processes in fractured rocks at varying scales from single fractures to fracture networks. It also discussed the implication and potential application of the advanced understanding of coupled THMC processes in fractured rocks for geotechnical and geo-energy engineering.




Thermo-Hydro-Mechanical (THM) coupled simulations of innovative enhanced geothermal systems for heat and electricity production as well as energy storage


Book Description

Enhanced geothermal systems (EGSs) evolved from the hot dry rock can provide a significant amount of energy while shifting towards negligible carbon emission. In order to investigate some important issues related to EGS, several scenarios have been analyzed using powerful numerical tools (FLAC3Dplus and TOUGH2MP-TMVOC). While conducting multiple hydraulic fracturing, it is observed that the newly created successive fracture’s configuration highly depends on the previous one under the influence of stress shadow. Therefore, the assumption of using similar multiple fracture geometries and shapes for energy exploitation may lead to erroneous estimations. A case study has been performed further using the engineering data of the GeneSys project in the North German Basin. Numerous scenarios have been investigated, and the optimized EGS project is proposed, whose installed power capacity of one side of the injection well declines from 7.17 MW to 5.08 MW over 30 years. Moreover, the Levelized cost of electricity is calculated at 5.46 c$/kWh, which is quite economical compared to the current electricity price. Finally, an innovative concept of regenerative EGS is proposed by storing surplus renewable energy in multiple hydraulic fractures that can reduce the reservoir temperature reduction rate. The results of continuous injection/production cycles depicted that a regenerative EGS could be achieved in reality.




Coupled Thermo-Hydro-Mechanical-Chemical Processes in Geo-systems


Book Description

Among the most important and exciting current steps forward in geo-engineering is the development of coupled numerical models. They represent the basic physics of geo-engineering processes which can include the effects of heat, water, mechanics and chemistry. Such models provide an integrating focus for the wide range of geo-engineering disciplines. The articles within this volume were originally presented at the inaugural GeoProc conference held in Stockholm and contain a collection of unusually high quality information not available elsewhere in an edited and coherent form. This collection not only benefits from the latest theoretical developments but also applies them to a number of practical and wide ranging applications. Examples include the environmental issues around radioactive waste disposal deep in rock, and the search for new reserves of oil and gas.




Rock Characterisation, Modelling and Engineering Design Methods


Book Description

Rock Characterisation, Modelling and Engineering Design Methods contains the contributions presented at the 3rd ISRM SINOROCK Symposium (Shanghai, China, 1820 June 2013). The papers contribute to the further development of the overall rock engineering design process through the sequential linkage of the three themes of rock characterisation, model




Underground Storage of CO2 and Energy


Book Description

Of the known greenhouse gases, political attention to date has primarily focused on carbon dioxide (CO2), whereby it is assumed that underground storages of crude oil and natural gas through Carbon Capture and Storage (CCS) technology could contribute significantly to global climate protection. Underground Storage of CO2 and Energy covers many aspects of CO2 sequestration and its usage, as well as of underground storage of fossil and renewable energy sources, and is divided into 8 parts: • Environmental and Energy Policy & Law for Underground Storage • Geological Storage and Monitoring • Enhanced Gas and Oil Recovery Using CO2 (CO2 -EGR/EOR) • Rock Mechanical Behavior in Consideration of Dilatancy and Damage • Underground Storage of Natural Gas and Oil • Underground Storage of Wind Energy • State-of-the-Art & New Developments in Gas Supply in Germany and China • EOR & New Drilling Technology Underground Storage of CO2 and Energy will be invaluable to academics, professionals and engineers, and to industries and governmental bodies active in the field of underground storage of fossil and renewable energy sources.




Clean Energy Systems in the Subsurface: Production, Storage and Conversion


Book Description

Anthropogenic greenhouse gas emissions, energy security and sustainability are three of the greatest contemporary global challenges today. This year the Sino-German Cooperation Group “Underground Storage of CO2 and Energy”, is meeting on the 21-23 May 2013 for the second time in Goslar, Germany, to convene its 3rd Sino-German conference on the theme “Clean Energy Systems in the Subsurface: Production, Storage and Conversion”. This volume is a collection of diverse quality scientific works from different perspectives elucidating on the current developments in CO2 geologic sequestration research to reduce greenhouse emissions including measures to monitor surface leakage, groundwater quality and the integrity of caprock, while ensuring a sufficient supply of clean energy. The contributions herein have been structured into 6 major thematic research themes: Integrated Energy and Environmental Utilization of Geo-reservoirs: Law, Risk Management & Monitoring CO2 for Enhanced Gas and Oil Recovery, Coal Bedded Methane and Geothermal Systems Trapping Mechanisms and Multi-Barrier Sealing Systems for Long-Term CO2 Storage Coupled THMC-Processes and Numerical Modelling Rock Mechanical Behaviour Considering Cyclic Loading, Dilatancy, Damage, Self-sealing and Healing Underground Storage and Supply of Energy “Clean energy systems in the subsurface” will be invaluable to researchers, scientists and experts in both academia and industry trying to find a long lasting solution to the problems of global climate change, energy security and sustainability.