Frost Resistance of Concrete


Book Description

This book forms the proceedings of the international workshop to be held in Essen, Germany. This workshop summarises the conclusion of the technical committee's investigations into the resistance of concrete to freeze-thaw attack, specific in this to resistance with or without de-icing chemicals. It presents the RILEM recommendations on testing the freeze-thaw and de-icing salt resistance of concrete.




Durability of Concrete in Cold Climates


Book Description

This book provides a comprehensive and authoritative review of durability of the frost resistance of concrete. It will enable both concrete materials specialists and practising engineers to better understand the deterioration processes which take place during freezing and thawing, and the effects of de-icing salts on concrete. It shows how test pro




Resistance of Concrete to Freezing and Thawing


Book Description

This study, aimed at improving the freeze-thaw resistance of concrete, consists of three parts. Part I evaluates parameters affecting the freeze-thaw durability of concrete. A modification of the existing standard of method for determining the durability factor of concrete specimens is proposed, and a new procedure for fundamental transverse frequency (used in durability factor calculations) has been developed. Part II focuses on developing better methods for identifying nondurable aggregates, and has resulted in a rapid new test based on the hydraulic fracture of aggregates. Part III describes field experiments to evaluate the freeze-thaw resistance of a number of specified concrete mixes and the use of sealants to mitigate D-cracking. Preliminary field performance results are presented.







Lea's Chemistry of Cement and Concrete


Book Description

Lea's Chemistry of Cement and Concrete deals with the chemical and physical properties of cements and concretes and their relation to the practical problems that arise in manufacture and use. As such it is addressed not only to the chemist and those concerned with the science and technology of silicate materials, but also to those interested in the use of concrete in building and civil engineering construction. Much attention is given to the suitability of materials, to the conditions under which concrete can excel and those where it may deteriorate and to the precautionary or remedial measures that can be adopted. First published in 1935, this is the fourth edition and the first to appear since the death of Sir Frederick Lea, the original author. Over the life of the first three editions, this book has become the authority on its subject. The fourth edition is edited by Professor Peter C. Hewlett, Director of the British Board of Agrement and visiting Industrial Professor in the Department of Civil Engineering at the University of Dundee. Professor Hewlett has brought together a distinguished body of international contributors to produce an edition which is a worthy successor to the previous editions.




Advanced Concrete Technology 4


Book Description

Based on the Institute of Concrete Technology's Advanced Concrete Technology Course, these four volumes are a comprehensive educational and reference resource for the concrete materials technologist. An expert international team of authors from research, academia and industry has been brought together to produce this unique series. Each volume deals with a different aspect of the subject: constituent materials, properties, processes and testing and quality. With worked examples, case studies and illustrations throughout, the books will be a key reference for the concrete specialist for years to come. - Expert international authorship ensures the series is authoritative - Case studies and worked examples help the reader apply their knowledge to practice - Comprehensive coverage of the subject gives the reader all the necessary reference material




Application of Super Absorbent Polymers (SAP) in Concrete Construction


Book Description

This is the state-of-the-art report prepared by the RILEM TC “Application of Super Absorbent Polymers (SAP) in concrete construction”. It gives a comprehensive overview of the properties of SAP, specific water absorption and desorption behaviour of SAP in fresh and hardening concrete, effects of the SAP addition on rheological properties of fresh concrete, changes of cement paste microstructure and mechanical properties of concrete. Furthermore, the key advantages of using SAP are described in detail: the ability of this material to act as an internal curing agent to mitigate autogenous shrinkage of high-performance concrete, the possibility to use SAP as an alternative to air-entrainment agents in order to increase the frost resistance of concrete, and finally, the benefit of steering the rheology of fresh cement-based materials. The final chapter describes the first existing and numerous prospective applications for this new concrete additive.




Cement Based Materials


Book Description

Cement-based materials have been used by humans nearly since the dawn of civilization. The Egyptians used lime and gypsum cement to bind their aggregate materials, mud and straw, resulting in bricks that are used for building their famous Egyptian pyramids (between 3000 and 2500 BC). Hydrated cement is a cement material bonded together with water and used for building construction; it is characterized by acceptable chemical, physical, thermal, mechanical, and structural stability. It plays a main role in the creation of vessels for storage, roads to travel on, weather-resistant structure for protection, inert hard stabilizer for hazardous wastes, and so on. Due to the composition of these materials and their advantages, it has been practiced in different applications. Cement is an essential component of making concrete, the single most prevalent building material used worldwide for construction, skyscrapers, highways, tunnels, bridges, hydraulic dams, and railway ties. Besides their numerous desired properties, there are some undesirable features. To overcome these disadvantages, several studies were established to prepare, improve, and evaluate innovative cement-based materials. Despite its oldness and deep research, every year several methods and materials evolve and so do cement technology. This book intends to provide a comprehensive overview on recent advances in the evaluation of these materials.




Building Materials in Civil Engineering


Book Description

The construction of buildings and structures relies on having a thorough understanding of building materials. Without this knowledge it would not be possible to build safe, efficient and long-lasting buildings, structures and dwellings. Building materials in civil engineering provides an overview of the complete range of building materials available to civil engineers and all those involved in the building and construction industries.The book begins with an introductory chapter describing the basic properties of building materials. Further chapters cover the basic properties of building materials, air hardening cement materials, cement, concrete, building mortar, wall and roof materials, construction steel, wood, waterproof materials, building plastics, heat-insulating materials and sound-absorbing materials and finishing materials. Each chapter includes a series of questions, allowing readers to test the knowledge they have gained. A detailed appendix gives information on the testing of building materials.With its distinguished editor and eminent editorial committee, Building materials in civil engineering is a standard introductory reference book on the complete range of building materials. It is aimed at students of civil engineering, construction engineering and allied courses including water supply and drainage engineering. It also serves as a source of essential background information for engineers and professionals in the civil engineering and construction sector. - Provides an overview of the complete range of building materials available to civil engineers and all those involved in the building and construction industries - Explores the basic properties of building materials featuring air hardening cement materials, wall and roof materials and sound-absorbing materials - Each chapter includes a series of questions, allowing readers to test the knowledge they have gained




Waste and Supplementary Cementitious Materials in Concrete


Book Description

Waste and Supplementary Cementitious Materials in Concrete: Characterisation, Properties and Applications provides a state-of-the-art review of the effective and efficient use of these materials in construction. Chapters focus on a specific type of material, addressing their characterization, strength, durability and structural applications. Sections include discussions of the properties of materials, including their physical, chemical and characterization, their strength and durability, modern engineering applications, case studies, the state of codes and standards of implementation, cost considerations, and the role of materials in green and sustainable construction. The book concludes with a discussion of research needs. - Focuses on material properties and applications (as well as 'sustainability' aspects) of cementitious materials - Assembles leading researchers from diverse areas of study - Ideas for use as a 'one stop' reference for advanced postgraduate courses focusing on sustainable construction materials